flash tinytile


Tamra Oyama <tamrako@...>
 

Hello all,

I am trying to flash my tinytile. When I use the commands make BOARD=tinytile flash or make flash or the dfu-util command, I get the errors below. Tinytile does not have a jtag connection and it seems like it's looking for a jtag connection. I want to flash using the dfu-util command. I was able to do this with my arduino_101. I am trying to use the same command, dfu-util -a x86_app -D outdir/tinytile/zephyr.bin. This part is successful. However, when I open minicom, minicom freezes and it appears the code is not being executed. Since I can't see anything in minicom, I am not sure how to debug this issue or what's really going on. Any ideas? It would be super great if someone could point us in the right direction. Thank you for your time!

tamrako@tamrako-Inspiron-13-7378:~/CODK/zephyr/samples/bluetooth/beacon$ make BOARD=tinytile
make[1]: Entering directory '/home/tamrako/CODK/zephyr'
make[2]: Entering directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/tinytile'
  CHK     include/generated/generated_dts_board.conf
  Using /home/tamrako/CODK/zephyr as source for kernel
  GEN     ./Makefile
  CHK     include/generated/version.h
  CHK     include/generated/generated_dts_board.h
  CHK     misc/generated/configs.c
  CHK     include/generated/offsets.h
make[2]: Leaving directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/tinytile'
make[1]: Leaving directory '/home/tamrako/CODK/zephyr'
tamrako@tamrako-Inspiron-13-7378:~/CODK/zephyr/samples/bluetooth/beacon$ make flash
Using /home/tamrako/CODK/zephyr/boards/x86/qemu_x86/qemu_x86_defconfig as base
Merging /home/tamrako/CODK/zephyr/kernel/configs/kernel.config
Merging prj.conf
#
# configuration written to .config
#
make[1]: Entering directory '/home/tamrako/CODK/zephyr'
make[2]: Entering directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/qemu_x86'
  GEN     ./Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/generated/generated_dts_board.conf
  UPD     include/generated/generated_dts_board.conf
  CHK     include/generated/generated_dts_board.conf
Flashing not supported with this board.
Please check the documentation for alternate instructions.
make[2]: Leaving directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/qemu_x86'
make[1]: Leaving directory '/home/tamrako/CODK/zephyr'

tamrako@tamrako-Inspiron-13-7378:~/CODK/zephyr/samples/bluetooth/beacon$ make BOARD=tinytile flash
make[1]: Entering directory '/home/tamrako/CODK/zephyr'
make[2]: Entering directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/tinytile'
  CHK     include/generated/generated_dts_board.conf
  Using /home/tamrako/CODK/zephyr as source for kernel
  GEN     ./Makefile
  CHK     include/generated/version.h
  CHK     include/generated/generated_dts_board.h
  CHK     misc/generated/configs.c
  CHK     include/generated/offsets.h
Flashing tinytile
Flashing Target Device
Open On-Chip Debugger 0.9.0-dirty (2017-05-16-18:46)
Licensed under GNU GPL v2
For bug reports, read
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
trst_only separate trst_push_pull
jtag_ntrst_delay: 300
Error: no device found
Error: unable to open ftdi device with vid 0403, pid 6010, description 'Flyswatter2' and serial '*'

/home/tamrako/CODK/zephyr/Makefile:1330: recipe for target 'flash' failed
make[2]: *** [flash] Error 1
make[2]: Leaving directory '/home/tamrako/CODK/zephyr/samples/bluetooth/beacon/outdir/tinytile'
Makefile:178: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory '/home/tamrako/CODK/zephyr'
/home/tamrako/CODK/zephyr/Makefile.inc:88: recipe for target 'flash' failed
make: *** [flash] Error 2

Sincerely,
Tamra

Join devel@lists.zephyrproject.org to automatically receive all group messages.