Daily Gerrit Digest


donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/9964 : Xtensa port: Added board configuration files for the Xtensa simulator paltform.
- https://gerrit.zephyrproject.org/r/9960 : Xtensa port: Started port to for Xtensa cores family.
- https://gerrit.zephyrproject.org/r/9963 : Bluetooth: Introduce a new connection parameter request callback
- https://gerrit.zephyrproject.org/r/9937 : net: tcp: Get rid of `recv_mss` field from TCP struct
- https://gerrit.zephyrproject.org/r/9936 : net: tcp: Remove unused `recv_ack` field from TCP context
- https://gerrit.zephyrproject.org/r/9931 : net: tcp: Ensure `recv_mss` won't overflow if interface MTU is <40
- https://gerrit.zephyrproject.org/r/9929 : net: tcp: Ensure all timers are disposed of when releasing context
- https://gerrit.zephyrproject.org/r/9925 : arm: cmsis: Port nvic to CMSIS
- https://gerrit.zephyrproject.org/r/9940 : net: tcp: Destroy net_tcp struct at the same time as the context
- https://gerrit.zephyrproject.org/r/9935 : net: tcp: Pass correct user_data pointers
- https://gerrit.zephyrproject.org/r/9941 : net: tcp: Don't ACK inbound FIN packets
- https://gerrit.zephyrproject.org/r/9948 : net: tcp: in tcp_establish save TCP flags for post-processing use
- https://gerrit.zephyrproject.org/r/9926 : drivers: slip: Just unref, don't destroy sent buf chains
- https://gerrit.zephyrproject.org/r/9938 : drivers: bmi160: add sample ready check
- https://gerrit.zephyrproject.org/r/9939 : samples: bmi160: reduce polling mode sampling frequency
- https://gerrit.zephyrproject.org/r/9928 : net: tcp: Also signal EOF with a negative status code
- https://gerrit.zephyrproject.org/r/9944 : net: tcp: Reduce size of `state` member from 32 to 4 bits
- https://gerrit.zephyrproject.org/r/9924 : arm: cmsis: covert aircr
- https://gerrit.zephyrproject.org/r/9930 : net: tcp: Use an uint8_t for retry timeout instead of an uin32_t
- https://gerrit.zephyrproject.org/r/9950 : net: tcp: handle TCP_FIN after processing any data in the buffer
- https://gerrit.zephyrproject.org/r/9949 : net: tcp: skip processing of TCP_ACK buffers
- https://gerrit.zephyrproject.org/r/9953 : Bluetooth: RFCOMM: Implement Aggregate Flow Control
- https://gerrit.zephyrproject.org/r/9923 : arm: cmsis: convert systick to CMSIS
- https://gerrit.zephyrproject.org/r/9951 : net: tcp: don't assume TCP_FIN buffers are NET_DROP
- https://gerrit.zephyrproject.org/r/9952 : net: tcp: if buffer is TCP_FIN increment send_ack by 1
- https://gerrit.zephyrproject.org/r/9945 : kernel: add user data API to timers
- https://gerrit.zephyrproject.org/r/9947 : tests/pwm: add PINMUX config for D2000 board
- https://gerrit.zephyrproject.org/r/9946 : tests: add test for k_timer_user_data_set/get()
- https://gerrit.zephyrproject.org/r/9933 : tests: benchmark: sys_kernel: Porting to unified
- https://gerrit.zephyrproject.org/r/9943 : sensor: remove sensor value type
- https://gerrit.zephyrproject.org/r/9927 : build: Just use the ZEPHYRINCLUDE path for when we make offsets
- https://gerrit.zephyrproject.org/r/9922 : arm: cmsis: Prep for move to CMSIS by remove unused code
- https://gerrit.zephyrproject.org/r/9920 : arm: cortex-m: Create CONFIG_BOOT_HEADER_SIZE

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/6306 : net: zoap_server: Enable connecting with bluetooth
- https://gerrit.zephyrproject.org/r/9805 : ext: mcux: add MCR20Overwrites.h
- https://gerrit.zephyrproject.org/r/9889 : serial: k64: Remove the uart_k20 driver
- https://gerrit.zephyrproject.org/r/9888 : frdm_k64f: hexiwear_k64: Remove defaults for the uart_k20 driver
- https://gerrit.zephyrproject.org/r/9887 : k64: Change the default serial driver to the mcux one
- https://gerrit.zephyrproject.org/r/9886 : frdm_k64f: hexiwear_k64: Add defaults for the mcux serial driver
- https://gerrit.zephyrproject.org/r/9807 : drivers: ieee802154: add MCR20A driver
- https://gerrit.zephyrproject.org/r/9806 : boards: frdm_k64f: add pinmux settings for MCR20A
- https://gerrit.zephyrproject.org/r/9809 : samples: ieee802154: add MCR20A
- https://gerrit.zephyrproject.org/r/9874 : arm: cmsis: Port prep_c.c to CMSIS
- https://gerrit.zephyrproject.org/r/9653 : net: slip: Do not remove fragments when sending data
- https://gerrit.zephyrproject.org/r/9891 : net: linkaddr: calculate linkaddr storage addr size via config
- https://gerrit.zephyrproject.org/r/9893 : net: ipv6: fix NULL reference in handle_ra_neighbor
- https://gerrit.zephyrproject.org/r/6410 : initial xtensa code drop
- https://gerrit.zephyrproject.org/r/9709 : Bluetooth: SDP: Add API to extract Attribute Value
- https://gerrit.zephyrproject.org/r/7626 : flash/stm32: flash driver for STM32F3x series microcontrollers
- https://gerrit.zephyrproject.org/r/7614 : boards: add initial support for Nucleo-64 with Soc STM32F334
- https://gerrit.zephyrproject.org/r/7615 : boards: add initial support for STM32373C-EVAL with SoC STM32F373VC
- https://gerrit.zephyrproject.org/r/9693 : pinmux/stm32: extend pinmux driver functionality to support STM32F3X series MCUs
- https://gerrit.zephyrproject.org/r/9701 : pinmux/stm32: default pin assignment for STM32373C-EVAL board
- https://gerrit.zephyrproject.org/r/7625 : exti/stm32: add support for F334 & F373 MCUs
- https://gerrit.zephyrproject.org/r/9325 : gpio/stm32: provide GPIO driver implementation for STM32F3X family
- https://gerrit.zephyrproject.org/r/7613 : soc/stm32: add initial support for STM32F3X series
- https://gerrit.zephyrproject.org/r/9868 : uart/stm32: add STM32F3X support for uart
- https://gerrit.zephyrproject.org/r/9699 : pinmux/stm32: default pin assignment for STM3210C-EVAL board
- https://gerrit.zephyrproject.org/r/9700 : pinmux/stm32: default pin assignment for NUCLEO-F334R8 board
- https://gerrit.zephyrproject.org/r/7623 : clock/stm32: add STM32F3X reset and clock control
- https://gerrit.zephyrproject.org/r/7034 : tests: add fifo/lifo test cases with unified kernel
- https://gerrit.zephyrproject.org/r/8922 : scripts: Add device tree parser script
- https://gerrit.zephyrproject.org/r/9896 : cc3200: Added board documentation in RST format.
- https://gerrit.zephyrproject.org/r/9885 : serial: Introduce new mcux shim driver
- https://gerrit.zephyrproject.org/r/7104 : drivers: spi: Add nRF5 SPI slave driver
- https://gerrit.zephyrproject.org/r/5604 : drivers: spi: Add SPI_SLAVE flag to allow platform drivers to switch to slave mode
- https://gerrit.zephyrproject.org/r/7107 : tests: Add spi_masterslave test program

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/9918 : net: ieee802154: inform about unsupported frames
- https://gerrit.zephyrproject.org/r/9965 : net: mgmt: Make NET_MGMT_GET_* macros return meaningful values
- https://gerrit.zephyrproject.org/r/9921 : Bluetooth: GATT: Fix missing connection address comparison
- https://gerrit.zephyrproject.org/r/9962 : Bluetooth: Prefer struct bt_le_conn_param over individual values
- https://gerrit.zephyrproject.org/r/9958 : samples: net: Fix dhcpv4 building with net mgmt event support
- https://gerrit.zephyrproject.org/r/9957 : net: mgmt: Silently ignore net_mgmt_event functions if not enabled
- https://gerrit.zephyrproject.org/r/9959 : Bluetooth: ATT: Add new error code from CSSv7
- https://gerrit.zephyrproject.org/r/9932 : arc: fix unaligned variables resulting in unaligned k_cpu_sleep_mode
- https://gerrit.zephyrproject.org/r/9942 : MAINTAINERS: update sensor drivers section
- https://gerrit.zephyrproject.org/r/9919 : Merge arm branch into master
- https://gerrit.zephyrproject.org/r/9916 : net: bt: Add disconnect shell command
- https://gerrit.zephyrproject.org/r/9867 : net: bt: Add scan shell command
- https://gerrit.zephyrproject.org/r/9917 : net: echo_client: Enable CONFIG_NET_L2_BLUETOOTH_SHELL in prj_bt.conf
- https://gerrit.zephyrproject.org/r/9862 : net: echo_client: Don't start sending packets if interface is not UP
- https://gerrit.zephyrproject.org/r/9915 : net: bt: Add disconnect management command
- https://gerrit.zephyrproject.org/r/9861 : net: echo_client: Fix using CONFIG_NETWORKING_WITH_BT
- https://gerrit.zephyrproject.org/r/9864 : net: bt: Add connect management command
- https://gerrit.zephyrproject.org/r/9863 : net: bt: Fix not showing any logs
- https://gerrit.zephyrproject.org/r/9860 : net: mgmt: Decode event fields
- https://gerrit.zephyrproject.org/r/9866 : net: bt: Add scan management command
- https://gerrit.zephyrproject.org/r/9865 : net: bt: Add shell support
- https://gerrit.zephyrproject.org/r/8624 : tcptest: Fix wrong variable type in in print() call
- https://gerrit.zephyrproject.org/r/9439 : tests: add timer test case with unified kernel
- https://gerrit.zephyrproject.org/r/9353 : scripts: Explicitly call out python2
- https://gerrit.zephyrproject.org/r/9354 : samples: task_profiler: Be explicit about python
- https://gerrit.zephyrproject.org/r/9816 : tests: Add PWM driver api test

Join devel@lists.zephyrproject.org to automatically receive all group messages.