Re: i can debug my STM32-F411RE running zephyr with OpenOCD and arm-none-eabi-gdb, but how can i do this with arduino_due board with the same tools?
曹子龙 <13824125580 at 163.com...>
hi:toggle quoted messageShow quoted text
another question, i have seen the wiki you pasted to me, and i found i did not have the flayswatter device, but i have a altera usb-blaster, so, can i use altera usb-blaster instead of the flyswatter to cooperate with the OpenOCD to finish the debug operation on the arduino_due board? thanks for your reply.
At 2017-01-25 18:06:26, "Erwan Gouriou" <erwan.gouriou(a)linaro.org> wrote:
Are you using Nulceo_f411RE?
If this is the case, this board embeds a ST-LINK debugger/programmer that helps you controling your board with USB.
This is specific to ST developpement boards like Nucleo, Disco or Eval.
If you want to debug on Arduino, please refer to dedicated wiki page:
On 25 January 2017 at 09:51, 曹子龙 <13824125580(a)163.com> wrote:
i can debug my STM32-F411RE running zephyr with OpenOCD and arm-none-eabi-gdb, the BOARD and the PC host connected directly with the USB wire, i can use this simple things to debug the zephyr flow from _reset.
what puzzle me is that from the document of OpenOCD, we must be connect to the JTAG of the board, but i use the usb of F411re do the same thing, i dont know why?
and if i want to do the debug operation on arduino_due, did this can be done by using the same tools like F411re ? thanks for your kindly reply.