Re: Choosing Tx Buffers in BLE stack


Carles Cufi
 

Note that if you do not own a BLE sniffer you can still use a Nordic board to sniff traffic over the air:

https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF-Sniffer

Carles

-----Original Message-----
From: devel@lists.zephyrproject.org <devel@lists.zephyrproject.org> On
Behalf Of Chettimada, Vinayak Kariappa
Sent: 05 October 2018 10:36
To: dhguja@gmail.com; devel@lists.zephyrproject.org
Subject: Re: [Zephyr-devel] Choosing Tx Buffers in BLE stack

Do you have a sniffer trace you can send to me email?

It appears the peer is not responding to a control procedure.

-Vinayak

-----Original Message-----
From: <devel@lists.zephyrproject.org> on behalf of "dhguja@gmail.com"
<dhguja@gmail.com>
Date: Thursday, 4 October 2018 at 11:19 AM
To: "devel@lists.zephyrproject.org" <devel@lists.zephyrproject.org>
Subject: Re: [Zephyr-devel] Choosing Tx Buffers in BLE stack




Hello All,
I did some more debugging on my problem and i noticed that
whenever the characters are stopped receiving by windows host i get a
disconnection in my device with either
LMP RESPONSE TIMEOUT / LL RESPONSE TIMEOUT (0x22) or CONNECTION
TIMEOUT (0x08)
always.

Is this expected on the zephyr side? Is there anything else i can do
from my device perspective?


I also posted my queries in MS forums and waiting for some solution
there too.

Thanks for the help.
Dhananjay G J




Join devel@lists.zephyrproject.org to automatically receive all group messages.