Re: Does the EFR32_slwstk6061a port work?


Christian Taedcke
 

Hello Jake,

Am Montag, den 29.10.2018, 18:03 +0000 schrieb Kumar Gala:
On Oct 29, 2018, at 5:00 PM, Jake Baldwin <jake.a.baldwin@...
wrote:
The EFR32_SLWSTK6061A board is very similar to the
EFR32_SLWSTK6000B. The microcontroller uart0, led, and button pins
are exactly the same. Even though the microcontrollers are
different they share the same flash and RAM starting location the
same peripheral memory addresses. So I figured I would try to build
the example project for the 6061A and load it onto the 6000B. But
it didn't work.

...
gpioa is correctly listed at 0x4000a000 but the higher level group
starts at 0x4000A400 which is believe is incorrect.

Two questions: Does this look like an error? Has anyone loaded this
onto a 6061A and seen the hello world message print in a console?
Hopefully Christian can chime in if the latest code is working for
him or not.
I just tried samples/hello_world from the current master on the
efr32_slwstk6061a and it is working fine:

***** Booting Zephyr OS zephyr-v1.13.0-1384-gf2b9cc62bb *****
Hello World! efr32_slwstk6061a

Also samples/basic/button works as expected.

Since your board has a Mighty Gecko, it might be better to start from
https://github.com/zephyrproject-rtos/zephyr/pull/9042 instead of the
Flex Gecko, which is used on the EFR32_SLWSTK6061A.

Regards,
Christian

Join devel@lists.zephyrproject.org to automatically receive all group messages.