Re: Zephyr (v1.13.0) HCI_UART running on nRF52 DK why BD address is always 00:00:00:00:00:00 after power cycle #nrf52832


Hi,guys, It seems that I met a similar problem with Frank.
I use nRF52832 running HCI_UART sample as a controller. I want to make the controller advertise unconnectable packets outside, so I use bluez (version 5.48)
and hcitool to set advertise data :
sudo hcitool -i hci0 cmd 0x08 0x0008 1f 02 01 06 03 03 aa fe 17 16 aa fe 00 -10 00 01 02 03 04 05 06 07 08 09 0a 0b 0e 0f 00 00 00 00
and set advertise enable:
sudo hcitool -i hci0 cmd 0x08 0x000a 01
I detect the process with btmon, the controller returns success ,like this below:

But I didn't find the packet whose data was what I have set with hcitool command. I wonder if this is normal, and will the whole zero mac-address cause this problem ?

Join to automatically receive all group messages.