Hello,

I am trying to port Zephyr into one of the cheap, breadboard friendly, "STM32F103C8T6 Minimum System Development Boards" (link not attached due to overwhelming results in Google) and I am facing some difficulty.

So far, with the other ported boards as a reference, I was able to setup a new board and get the blinky sample application to work. However, I am unable to get console logs to show up in UART_1 as expected. I have tried the hello_world and shell applications without much luck.

Digging a little deeper, I realised that the SOC support had STM32103XB and there isn't a STM32103X8 or a STM32103XX. Now I am beginning now wondering if there is a reason why the SOC was called STM32103XB and not STM32103XX, as the data sheet for the two of them is unified. I also verified that the peripheral register address map for UART 1 is in fact at the the same location as in the STM32103XB, which means at least UART 1 should work even if the SOCs aren't compatible.

Here is a patch to my work so far http://embedjournal.com/board_stm32_min_dev.patch. Do let me know If I am missing something. Also, is this a hardware that the upstream will be interested in? It's a pretty popular design although there are slight incistencies. I can raise a PR after successful validation if it means anything.

Thanks,

Sid.

_______________________________________________
Zephyr-devel mailing list
Zephyr-devel@lists.zephyrproject.org
https://lists.zephyrproject.org/mailman/listinfo/zephyr-devel