Re: question in zephyrproject


Jaemin Choi <jaeminy.choi@...>
 

The import error is solved due to you guys. Thank you.

 

>>> 1. USER_SITE is the directory where pykwalify was installed

>>> 2. ENABLE_USER_SITE is True

>>> 3. sys.path contains the directory where pykwalify was installed

 

These checklists should be added on the website I think.

I figured it out that USER_SITE wasn't the directory where pkywalify was installed.

 

To make them same, i reinstall python3 with this command

pip install python3 --user --force-reinstall 

and also had to remove build directory to make it try to build new setting. 

 

however, I faced another error when Im trying this same command.

west build -b reel_board samples/hello_world --pristine     

 

these are new err message


Zephyr version: 2.0.99
-- Found PythonInterp: /usr/bin/python (found suitable version "3.7.1", minimum required is "3.4")
-- Selected BOARD reel_board
-- Found west: /home1/jaeminy.choi/.local/bin/west (found suitable version "0.6.2", minimum required is "0.6.0")
-- Loading /home1/jaeminy.choi/zephyr/zephyproject/zephyr/boards/arm/reel_board/reel_board.dts as base
-- Overlaying /home1/jaeminy.choi/zephyr/zephyproject/zephyr/dts/common/common.dts
Device tree configuration written to /home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/zephyr/include/generated/generated_dts_board.conf
Parsing Kconfig tree in /home1/jaeminy.choi/zephyr/zephyproject/zephyr/Kconfig
Loaded configuration '/home1/jaeminy.choi/zephyr/zephyproject/zephyr/boards/arm/reel_board/reel_board_defconfig'
Merged configuration '/home1/jaeminy.choi/zephyr/zephyproject/zephyr/samples/hello_world/prj.conf'
Configuration saved to '/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/zephyr/.config'
-- Cache files will be written to: /home1/jaeminy.choi/.cache/zephyr
-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- The ASM compiler identification is GNU
-- Found assembler: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
CMake Error at ../../cmake/extensions.cmake:1326 (message):
  Assertion failed: The toolchain is unable to build a dummy C file.  See
  CMakeError.log.
Call Stack (most recent call first):
  ../../CMakeLists.txt:44 (assert)


-- Configuring incomplete, errors occurred!
See also "/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFiles/CMakeOutput.log".
See also "/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFiles/CMakeError.log".
ERROR: command exited with status 1: /usr/local/bin/cmake -B/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build -S/home1/jaeminy.choi/zephyr/zephyproject/zephyr/samples/hello_world -GNinja -DBOARD=reel_board 

 

----------------------------------------------------------------------------------------------------------------------------------------------------

 

 

and these are the contents in /home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFiles/CMakeError.log

 

Compiling the C compiler identification source file "CMakeCCompilerId.c" failed.
Compiler: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
Build flags:
Id flags:

The output was:
1
/usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/8.3.0/../../../../arm-zephyr-eabi/b
in/ld: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/8.3.0/../../../../arm-zephyr
-eabi/lib/libc.a(lib_a-exit.o): in function `exit':
/home/buildslave/src/github.com/zephyrproject-rtos/sdk-ng/build/build_arm/.build/arm-zephyr-eabi/src/newlib/new
lib/libc/stdlib/exit.c:64: undefined reference to `_exit'
collect2: error: ld returned 1 exit status


Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed.
Compiler: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-g++
Build flags:
Id flags:

The output was:
1
/usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/8.3.0/../../../../arm-zephyr-eabi/b
in/ld: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/8.3.0/../../../../arm-zephyr
-eabi/lib/libc.a(lib_a-exit.o): in function `exit':
/home/buildslave/src/github.com/zephyrproject-rtos/sdk-ng/build/build_arm/.build/arm-zephyr-eabi/src/newlib/new
lib/libc/stdlib/exit.c:64: undefined reference to `_exit'
collect2: error: ld returned 1 exit status

--------------------------------------------------------------------------------------------------------------------------

 

 

 these are the contents in home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFiles/CMakeOutput.log".

 

The target system is: Generic - 2.0.99 - arm
The host system is: Linux - 3.13.0-100-generic - x86_64
Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
Compiler: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc
Build flags:
Id flags: -c

The output was:
0


Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "CMakeCCompilerId.o"

The C compiler identification is GNU, found in "/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFiles
/3.15.2/CompilerIdC/CMakeCCompilerId.o"

Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
Compiler: /usr/local/zephyr-sdk-0.10.3/arm-zephyr-eabi/bin/arm-zephyr-eabi-g++
Build flags:
Id flags: -c

The output was:
0


Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "CMakeCXXCompilerId.o"

The CXX compiler identification is GNU, found in "/home1/jaeminy.choi/zephyr/zephyproject/zephyr/build/CMakeFil
es/3.15.2/CompilerIdCXX/CMakeCXXCompilerId.o"

Checking whether the ASM compiler is GNU using "--version" matched "(GNU assembler)|(GCC)|(Free Software Founda
tion)":
arm-zephyr-eabi-gcc (crosstool-NG 1.24.0-rc2-dirty) 8.3.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

 

 

 

----------------------------------------------------------------------------------

 

 

This below is the text error message you asked. (import error message)

jaeminy.choi@lion:~/zephyr/zephyrproject/zephyr (master)$ west build -b qemu_x86 samples/hello_world
-- west build: build configuration:
       source directory: /home1/jaeminy.choi/zephyr/zephyrproject/zephyr/samples/hello_world
       build directory: /home1/jaeminy.choi/zephyr/zephyrproject/zephyr/build
       BOARD: qemu_x86 (origin: command line)
-- west build: generating a build system
Zephyr version: 2.0.0
CMake Warning at /home1/jaeminy.choi/zephyr/zephyrproject/zephyr/cmake/app/boilerplate.cmake:160 (message):
  The build directory must be cleaned pristinely when changing boards
Call Stack (most recent call first):
  CMakeLists.txt:5 (include)


-- Selected BOARD reel_board
-- Found west: /home1/jaeminy.choi/.local/bin/west (found suitable version "0.6.2", minimum required is "0.6.0")
CMake Error at /home1/jaeminy.choi/zephyr/zephyrproject/zephyr/cmake/zephyr_module.cmake:45 (message):
  Traceback (most recent call last):

    File "/home1/jaeminy.choi/zephyr/zephyrproject/zephyr/scripts/zephyr_module.py", line 19, in <module>
      import pykwalify.core

  ImportError: No module named 'pykwalify'

Call Stack (most recent call first):
  /home1/jaeminy.choi/zephyr/zephyrproject/zephyr/cmake/app/boilerplate.cmake:429 (include)
  CMakeLists.txt:5 (include)


-- Configuring incomplete, errors occurred!
ERROR: command exited with status 1: /usr/local/bin/cmake -B/home1/jaeminy.choi/zephyr/zephyrproject/zephyr/build -S/home1/jaeminy.choi/zephyr/zephyrproject/zephyr/samples/hello_world -GNinja -DBOARD=qemu_x86 

 

 

 

--------- Original Message ---------

Sender : Bolivar, Marti <Marti.Bolivar@...>

Date : 2019-09-18 05:22 (GMT+9)

Title : RE: [Zephyr-devel] question in zephyrproject

 

"Kinder, David B" <david.b.kinder@...> writes:

 

> Great!

>

> We’re working on an updated getting started guide that streamlines this setup process so some important steps such as updating the PATH are not missed (so easily).

> Check out https://github.com/zephyrproject-rtos/zephyr/pull/19123

> and the build artifacts for the GSG here:

> https://builds.zephyrproject.org/zephyrproject-rtos/zephyr/19123/docs/getting_started/index.html

 

FWIW, recent versions of pip3 install will warn you if ~/.local/bin

(or wherever it installs packages with --user) are not on PATH, so

hopefully this problem will become less common as time goes on.

 

>

> Comments appreciated.

>

> -- david

>

> From: devel@... <devel@...> On Behalf Of Lawrence King

> Sent: Tuesday, September 17, 2019 12:40 PM

> To: Allen Curtis <allen@...>; Bolivar, Marti <Marti.Bolivar@...>

> Cc: devel@...; jaeminy.choi@...

> Subject: Re: [Zephyr-devel] question in zephyrproject

>

> I’m with Charles. I had to add this to my .bashrc

>

> export PATH=~/.local/bin:$PATH

>

> Once I did this everything is good.

 

That is a separate issue as described in the back and forth between

Carles and I.

 

Let's not confuse the PATH environment variable, which is used to locate

the executable "west" file, with sys.path, which is the variable

Python uses to locate importable modules. The latter can be augmented

using the PYTHONPATH environment variable, but it should not be

necessary if python and pip3 are configured properly (and using the

default configuration for at least Ubuntu and Arch in my testing).

 

Thanks,

Marti

 

>

> Lawrence King

> Principal Developer

> +1(416)627-7302

>

> From: devel@...<mailto:devel@...> <devel@...<mailto:devel@...>> On Behalf Of Allen Curtis

> Sent: Tuesday, September 17, 2019 3:36 PM

> To: Bolivar, Marti <Marti.Bolivar@...<mailto:Marti.Bolivar@...>>

> Cc: devel@...<mailto:devel@...>; jaeminy.choi@...<mailto:jaeminy.choi@...>

> Subject: Re: [Zephyr-devel] question in zephyrproject

>

> I did not see the “python -m site” in the instructions.

>

> On Tue, Sep 17, 2019 at 12:33 PM Bolivar, Marti <Marti.Bolivar@...<mailto:Marti.Bolivar@...>> wrote:

> Allen Curtis <allen@...<mailto:allen@...>> writes:

>

>> Not my experience. The last time I installed the dependencies went into a

>> dotlocal directory under the user account. Python couldn’t find them.

>

> What distro are you using? Did you try running python3 -m site as

> described below to debug?

>

>>

>> On Tue, Sep 17, 2019 at 12:12 PM Bolivar, Marti <Marti.Bolivar@...<mailto:Marti.Bolivar@...>>

>> wrote:

>>

>>> Hi Jaemin, Allen,

>>>

>>> "Allen Curtis via Lists.Zephyrproject.Org<http://Lists.Zephyrproject.Org>"

>>> <allen=criticalsoftwaresolutions.com@...<mailto:criticalsoftwaresolutions.com@...>> writes:

>>>

>>> > I had this same problem. My solution was to export PYTHONPATH to include

>>> > the directory containing this module. If you went through the

>>> instructions,

>>> > installing all the dependencies, it is installed on your system

>>> > somewhere.

>>>

>>> Hmm, that shouldn't be needed if the Python dependencies were installed

>>> correctly.

>>>

>>> >

>>> > On Tue, Sep 17, 2019 at 4:16 AM via Lists.Zephyrproject.Org<http://Lists.Zephyrproject.Org>

>>> <jaeminy.choi=

>>> > samsung.com@...<mailto:samsung.com@...>> wrote:

>>> >

>>> >> Hello.

>>> >>

>>> >>

>>> >>

>>> >> This is Jaemin from Samsung Electronics and we are trying to set the

>>> >> environment up for Zephyr with

>>> >> https://docs.zephyrproject.org/latest/getting_started/index.html.

>>> >>

>>> >>

>>> >>

>>> >> Everything went well with your manuals but when I try this one

>>> >>

>>> >> west build -b reel_board samples/hello_world

>>> >>

>>> >> (in my case west build -b qemu_x86 samples/hello_world )

>>> >>

>>> >>

>>> >>

>>> >> The error which can't find pykwalify comes up like below.

>>>

>>> Based on your screenshot, it looks like you are running on Linux, so you

>>> should have installed west using "pip3 install --user west", which it

>>> looks like you did:

>>>

>>> -- Found west: /home/jaeminy.choi/.local/bin/west

>>>

>>> If so, then pykwalify should have been installed too, because west

>>> declares it as a dependency to pip:

>>>

>>> $ pip3 show west | grep Requires:

>>> Requires: colorama, PyYAML, pykwalify, configobj, setuptools

>>>

>>> So as Allen said, if you have west but it can't import pykwalify, there

>>> is a problem with the Python path. But you shouldn't need to set

>>> PYTHONPATH; pip and Python's USER_BASE should take care of this for you.

>>>

>>> First, you should check that pykwalify is installed, like this:

>>>

>>> $ pip3 show -f pykwalify | grep Location:

>>> Location: /home/foo/.local/lib/python3.6/site-packages

>>>

>>> If that doesn't work, reinstall west with pip3 to make sure you get it.

>>>

>>> Second, run "python3 -m site". The output should contain the pykwalify

>>> installation directory in sys.path. Something like this:

>>>

>>> $ python3 -m site

>>> sys.path = [

>>>     '/usr/local/lib/python3.6',

>>>     '/usr/lib/python36.zip',

>>>     '/usr/lib/python3.6',

>>>     '/usr/lib/python3.6/lib-dynload',

>>>     '/home/foo/.local/lib/python3.6/site-packages',

>>>     '/usr/local/lib/python3.6/dist-packages',

>>>     '/usr/lib/python3/dist-packages',

>>> ]

>>> USER_BASE: '/home/foo/.local' (exists)

>>> USER_SITE: '/home/foo/.local/lib/python3.6/site-packages' (exists)

>>> ENABLE_USER_SITE: True

>>>

>>> Make sure:

>>>

>>> 1. USER_SITE is the directory where pykwalify was installed

>>> 2. ENABLE_USER_SITE is True

>>> 3. sys.path contains the directory where pykwalify was installed

>>>

>>> For more details, check:

>>>

>>> https://docs.python.org/3/library/site.html#site.USER_BASE

>>>

>>> >>

>>> >>

>>> >> I've googled it to solve the problem but i ended up here.

>>>

>>> By the way, for the future, please consider cutting and pasting text

>>> instead of using screenshots of your terminal window as discussed in

>>>

>>>

>>> https://docs.zephyrproject.org/latest/guides/getting-help.html#use-copy-paste

>>>

>>> It makes it easier for others to google your exact error message.

>>>

>>> >>

>>> >> Can I have some advices?

>>>

>>> Hope this helps.

>>>

>>> Thanks,

>>> Marti

>>>

>>> >>

>>> >> (All programs I should install are beyond minimum version and I skipped

>>> >> set up a toolchain step because I set up the Zephyr SDK toolchains)

>>> >>

>>> >>

>>> >>

>>> >> Thanks,

>>> >>

>>> >> Jaemin

>>> >>

>>> >>

>>> >>

>>> >>

>>> >>

>>> >>

>>> >>

>>> >

>>> > --

>>> > *Allen Curtis*

>>> > Medical Device Architect

>>> > *Critical Software Solutions, LLC*

>>> >

>>> >

>>

>> --

>> *Allen Curtis*

>> Medical Device Architect

>> *Critical Software Solutions, LLC*

> --

> Allen Curtis

> Medical Device Architect

> Critical Software Solutions, LLC

>

 

 

 

Join devel@lists.zephyrproject.org to automatically receive all group messages.