From: Jamie Mccrae <Jamie.Mccrae@...>
Sent: 06 March 2020 09:04
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Cufi, Carles <Carles.Cufi@...>; mayank7117@...; devel@...
Subject: RE: [Zephyr-devel] hci interface stopped working after few hours #ble #hci #nrf52480 #uart

 

Hi Vinayak

> A btmon log would help identify the reason for disconnection.

 

I have uploaded the 2 logs here: https://www.dropbox.com/s/d2yurf6nxee9wk0/btmon_logs.zip?dl=0

The Zephyr one has quite a lot at the beginning before I made the connection. Here is one of the disconnect events from the zephyr log file:

< HCI Command: Disconnect (0x01|0x0006) plen 3           #624 [hci0] 292.906310

        Handle: 0

        Reason: Remote User Terminated Connection (0x13)

> HCI Event: Command Status (0x0f) plen 4                #625 [hci0] 292.907421

      Disconnect (0x01|0x0006) ncmd 1

        Status: Success (0x00)

> HCI Event: Disconnect Complete (0x05) plen 4           #626 [hci0] 292.923423

        Status: Success (0x00)

        Handle: 0

       Reason: Connection Terminated By Local Host (0x16)

@ MGMT Event: Device Disconnected (0x000c) plen 8    {0x0002} [hci0] 292.923459

        LE Address: DC:59:20:76:11:5C (Static)

        Reason: Connection terminated by local host (0x02)

@ MGMT Event: Device Disconnected (0x000c) plen 8    {0x0001} [hci0] 292.923459

        LE Address: DC:59:20:76:11:5C (Static)

        Reason: Connection terminated by local host (0x02)

 

> > the connection parameter update still fails but even minutes later I am still connected to the remote device.

>

> This is weird, the cypress dongle did not perform connection parameter update, update procedure on air only either succeeds or disconnects (unless it’s a connection parameter request procedure that is rejected by peer).

 

Yes, that is what it is, apologies:

 

> ACL Data RX: Handle 0 flags 0x02 dlen 16                #179 [hci0] 69.454378

      LE L2CAP: Connection Parameter Update Request (0x12) ident 2 len 8

        Min interval: 6

        Max interval: 12

        Slave latency: 0

        Timeout multiplier: 400

< ACL Data TX: Handle 0 flags 0x00 dlen 10                #180 [hci0] 69.454425

      LE L2CAP: Connection Parameter Update Response (0x13) ident 2 len 2

        Result: Connection Parameters rejected (0x0001)

 

Thanks,

Jamie

THIS MESSAGE, ANY ATTACHMENT(S), AND THE INFORMATION CONTAINED HEREIN MAY BE PROPRIETARY TO LAIRD CONNECTIVITY, INC. AND/OR ANOTHER PARTY, AND MAY FURTHER BE INTENDED TO BE KEPT CONFIDENTIAL. IF YOU ARE NOT THE INTENDED RECIPIENT, PLEASE DELETE THE EMAIL AND ANY ATTACHMENTS, AND IMMEDIATELY NOTIFY THE SENDER BY RETURN EMAIL. THIS MESSAGE AND ITS CONTENTS ARE THE PROPERTY OF LAIRD CONNECTIVITY, INC. AND MAY NOT BE REPRODUCED OR USED WITHOUT THE EXPRESS WRITTEN CONSENT OF LAIRD CONNECTIVITY, INC.