Hi there ,
I am trying to turn on advertise and I have below errors
[bluetooth]# scan on
Discovery started
[CHG] Controller AB:89:67:45:23:01 Discovering: yes
[NEW] Device FE:9B:39:0D:92:DA Nordic_UART
[NEW] Device EB:2E:27:65:B2:50 Nordic_UART
[NEW] Device 5B:38:AE:01:DA:1A 5B-38-AE-01-DA-1A
[NEW] Device 4C:5C:1F:26:C5:E6 4C-5C-1F-26-C5-E6
[NEW] Device DE:B1:4E:96:12:A3 TS101C_860906040263136
[NEW] Device F4:0A:E3:37:E7:95 TS101C_869857038077916
[NEW] Device EB:93:06:F2:57:91 FMC125_0597405_LE
[CHG] Device 5B:38:AE:01:DA:1A RSSI: -62
[NEW] Device 49:5B:9B:25:3B:48 49-5B-9B-25-3B-48
[NEW] Device E5:56:26:5A:B0:2E TS101C_358250330000216
[CHG] Device 5B:38:AE:01:DA:1A RSSI: -77
[CHG] Device 5B:38:AE:01:DA:1A RSSI: -64
[bluetooth]# scan off
Discovery stopped
[CHG] Controller AB:89:67:45:23:01 Discovering: no
[CHG] Device E5:56:26:5A:B0:2E RSSI is nil
[CHG] Device 49:5B:9B:25:3B:48 TxPower is nil
[CHG] Device 49:5B:9B:25:3B:48 RSSI is nil
[CHG] Device EB:93:06:F2:57:91 TxPower is nil
[CHG] Device EB:93:06:F2:57:91 RSSI is nil
[CHG] Device F4:0A:E3:37:E7:95 RSSI is nil
[CHG] Device DE:B1:4E:96:12:A3 RSSI is nil
[CHG] Device 4C:5C:1F:26:C5:E6 TxPower is nil
[CHG] Device 4C:5C:1F:26:C5:E6 RSSI is nil
[CHG] Device 5B:38:AE:01:DA:1A TxPower is nil
[CHG] Device 5B:38:AE:01:DA:1A RSSI is nil
[CHG] Device EB:2E:27:65:B2:50 RSSI is nil
[CHG] Device FE:9B:39:0D:92:DA RSSI is nil
[bluetooth]# discoverable on
Changing discoverable on succeeded
[CHG] Controller AB:89:67:45:23:01 Discoverable: yes
[bluetooth]# advertise on
Failed to register advertisement: org.bluez.Error.NotPermitted
Also observed that there is no link policy . And link mode is Master by default and when i tried changing it i have below error .
root@swi-mdm9x28-wp:~# hciconfig -a hci0 lm SLAVE,ACCEPT
Can't set default link mode on hci0: Operation not supported (95)
root@swi-mdm9x28-wp:~# hciconfig -a
hci0: Type: Primary Bus: UART
BD Address: AB:89:67:45:23:01 ACL MTU: 27:7 SCO MTU: 0:0
UP RUNNING
RX bytes:417 acl:0 sco:0 events:29 errors:0
TX bytes:228 acl:0 sco:0 commands:29 errors:0
Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: MASTER
Can't read local name on hci0: Input/output error (5)
BlueZ Version Information
root@swi-mdm9x28-wp:/usr/libexec# ./bluetooth/bluetoothd -v5.50root@swi-mdm9x28-wp:~# bluetoothctl --vbluetoothctl: 5.50Please Let me know what could be the reason and a probable solution to overcome this issue .
