devel@lists.zephyrproject.org

Re: RFC: extend sanitycheck testcase filtering expressiveness

I see nothing bad in the proposal. I would refrain from copying PLY into the source tree for the following reasons: - Support. Updating the library, which is not the part of the project may be a

By Dmitriy Korovkin · #2626 ·

RFC: remove microkernel Task IRQs from Zephyr

Problem statement: The current implementation of Microkernel Task IRQs has a hard dependency on dynamic interrupts, which we also want to remove from Zephyr. Although the mechanism could be

By Boie, Andrew P · #2625 ·

Re: Help for tests/benchmark/latency_measure run failed on Arduino Due board.

Hi Rodger, You can first have a try without "TEST=max" option. Besides this, gdb can be used to debug this issue after disabled the other successful indicators. Regards Min

By Li, Min A <min.a.li@...> · #2624 ·

Help for tests/benchmark/latency_measure run failed on Arduino Due board.

I built the test code at "tests/benchmark/latency_measure/microkernel" . It runs well using the qemu mode. I want to try it on Arduino Due board, built it using: make TEST=max BOARD=arduino_due

By Rodger Lin · #2623 ·

Zephyr 1.2.0-rc1 tagged

Hi, Zephyr v1.2.0-rc1 has been tagged, merge window for major features is now closed. We are targeting a release of v1.2.0 end of this week. Below you will find the changes since

By Nashif, Anas · #2622 ·

RFC: Method for PM app to detect if any device is busy before deciding to use deep sleep policy

Problem Statement: -------------------------- Entering deep sleep states during pending device transactions can cause transaction inconsistencies. Why this is a

By Thomas, Ramesh · #2621 ·

RFC: extend sanitycheck testcase filtering expressiveness

Problem statement: Test case filtering in sanitycheck's testcase.ini files allows sanitycheck to exclude certain test cases that are incompatible with particular architectures, boards, or the

By Boie, Andrew P · #2620 ·

Re: FRDM-K64 PWM BUS Fault

Full assembly listing in written to outdir/zephyr.lst. Having the address of instruction that trigger the fault, try looking it up in the listing and see if there's something obviously wrong. The

By Maciek Borzecki <maciek.borzecki@...> · #2619 ·

Re: FRDM-K64 PWM BUS Fault

I'd encourage you to file a JIRA/bug so that we can track this and get someone looking at it.

By Kalowsky, Daniel <daniel.kalowsky@...> · #2618 ·

FRDM-K64 PWM BUS Fault

Hi all, I am trying to use the PWM output on the K64 board. I have taken the sample/drivers/pwm_dw/src/main.c and modified it to use the CONFIG_PWM_K64_FTM_0_DEV_NAME and removed the CONFIG_PWM_DW=y

By Anders Dam Kofoed <adk@...> · #2617 ·

Re: RFC: Use error codes from errno.h

Hi Daniel, thanks for your feedback! See some comments inline: Quoting Dan Kalowsky (2016-03-21 14:10:43) Patch sent to gerrit. Fine by me. Patch sent to gerrit. There is no dependency so it can be

By Andre Guedes <andre.guedes@...> · #2616 ·

RFC: 2/5 System Device Driver Modifications (Revised v1.2)

[Rev 1.2 - Added a parameter to .suspend() and .resume() functions indicating the power policy used by the PMA. This parameter will help driver take policy based optimized actions. Described in detail

By Thomas, Ramesh · #2615 ·

Re: RFC: Use error codes from errno.h

Hi, trying the webmail reply for a first time. Be gentle. +1 +1 I would argue this should step 1. This can be and should be merged in before the close of the release window this week. So get

By Kalowsky, Daniel <daniel.kalowsky@...> · #2614 ·

[PATCH 3/3] arc_timer: assert that counter always lower than limit

From: Simon Desfarges <simon.desfarges(a)intel.com> ASSERT are put each time the timer0 limit register or the timer0 count register is modified. Change-Id:

By Desfarges, Simon <simon.desfarges@...> · #2613 ·

[PATCH 2/3] arc_timer: fix tickless idle

From: Simon Desfarges <simon.desfarges(a)intel.com> When exiting from tickless idle uppon an external IRQ, the TICK timer is set to fire at next TICK boundary. The current algorithm can lead to a

By Desfarges, Simon <simon.desfarges@...> · #2612 ·

[PATCH 1/3] arc_timer: fix wrong programmed limit when entering idle

From: Simon Desfarges <simon.desfarges(a)intel.com> The timer counts from 0 to programmed_limit included. Change-Id: Ifc8585210c319f5452fafc911d4f6d72c4b91eaa Tracked-On:

By Desfarges, Simon <simon.desfarges@...> · #2611 ·

Re: FRDM-K64 GPIO driver name

Hi, quite well, with your patch, I got the output! Now I'm wondering how I can manually set the pins to FUNC_GPIO = K64_PINMUX_ALT_1 = (0x1 << 8). If I write something like #include

By Idupsle <idupsle@...> · #2610 ·

Re: FRDM-K64 PRINT not working

Got it working using minicom and no flowcontrol...

By Anders Dam Kofoed <adk@...> · #2609 ·

Re: FRDM-K64 GPIO driver name

Hi Maureen and Idups I got UART output (printf) working using minicom. Don't know what the difference between screen and minicom is but using minicom I set it to not use flowcontrol 115200 8N1 and it

By Anders Dam Kofoed <adk@...> · #2608 ·

Re: RFC: 5/5 Provide interfaces for Power Management Applications Policies (Revised)

(Revised and incorporated feedbacks. The term "Tickless Idle" was found confusing to be used to refer to a PM policy. That is a specific term used for an optimized kernel idling mechanism saving

By Thomas, Ramesh · #2607 ·

Messages