Ok, there is a JIRA about board/soc structure documentation already and it happens to be assigned to me, I will address this ASAP, this might help you with the issue below. Anas

Hi, Some time ago the TSC discussed APIs in general and it was agreed that we need to revisit the APIs as we have them right when there is critical mass of architecture and board support and I think

I realised this and $subject may be a bit ambiguous, I meant that the FPGA can be programmed at any one time with a single CPU type chosen from a range of a dozen or so. I'm not trying to support

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/4472 : i2c: ksdk: Add shim driver - https://gerrit.zephyrproject.org/r/4473 : i2c: Fix restart flag in burst read -

Hi I'm trying to add Zephyr support for a board [1] where the 'SoC' is an FPGA that can be programmed with a dozen different CPU types and varying support IP, and I'm wondering how to organise

Hi Maureen, Thanks, I will wait for the green light. My Atmel SAM E70 port works well in my local workarea, I have everything necessary for initial support apart from UART driver. There are still a

Paul, Jukka, Submitted https://gerrit.zephyrproject.org/r/#/c/4491/ Regards, Rohit. IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If

Hello Kasim, The sensor types from sensor.h are in no way final, and new types can be added as the need arises for new drivers. Not sure if your driver could define a more specific type (that may

Hello Community, I would like to discuss GPIO / Pinmux driver combo which I believe become overcomplicated and may be confusing for a regular user. The current API seems to be designed around Intel

Rohit Grover <Rohit.Grover(a)arm.com> wrote: +1. Would you submit it to Gerrit? I believe running echo_server/echo_client should be a good first step, I'll look into that. As I mentioned, multiple

Hello,

Hi Piotr,

NEW JIRA items within last 24 hours: 4 [ZEP-760] Clean up samples and sanitise them. https://jira.zephyrproject.org/browse/ZEP-760 [ZEP-759] Add preliminary support for Atmel SAM E70

Hello Nitin, Perhaps this could help: https://gerrit.zephyrproject.org/r/gitweb?p=zephyr.git;a=tree;f=samples/static_lib You can also check:

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/4469 : Bluetooth: btp: Extend BTP specification to cover L2CAP tests - https://gerrit.zephyrproject.org/r/4462 : Bluetooth:

Jukka, Paul, I believe we should go ahead and fix tcpip_poll_tcp() according to the patch I submitted previously. This fix can supersede https://gerrit.zephyrproject.org/r/#/c/4226, and we can pause

| | Hi All, I  happened to work on a sensor driver in zephyr 1.4. The "sensor.h" provides support for very few sensors.Moreover lack of  support for any custom/generic data to pass between the

Hi Giribabu, You can look how the echo-client and echo-server sample app do things. Those apps can be found at samples/net/echo_client samples/net/echo_server For instructions how to setup the

Hi Dev group, In my application i want write UDP socket and send to linux host using QEMU. Is it possible to write an application to write payload on to UDP socket? That UDP socket is possible to

Hi, I am trying to write an application on Zephyr, in which I need to include some pre-built object files. What is the best way to include the pre-built object files on Zephyr. Thanks and