NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9608 : [DO NOT MERGE] doc: move documetnation context to root directory - https://gerrit.zephyrproject.org/r/9639 : doc: support

Hello, I'm porting zephyr to TI's CC2538 device family, but there is a special user case —— customer configuration area(CCA/CCFG). CCA is placed in the uppermost flash page, so the linker

Hi Both As you said I have tried to compile directly using arc and its compiling I thought to route the debug prints through UART over usb. But I think the current version supports UART over usb

OR, the ARC can utilize SPI too and talk to the accelerometer directly. It just depends upon which CPU you want to OWN which resource. -Chuck Sent: Tuesday, January 03, 2017 5:09 AM To:

Sorry. Typo. Top of the tree. Sent: Tuesday, January 3, 2017 10:06 AM To: Mahendravarman Rajarao (RBEI/EAA3) <Mahendravarman.Rajarao(a)in.bosch.com>; devel(a)lists.zephyrproject.org Subject: [devel]

Zephyr drivers for SPI and GPIO were updated recently to allow ARC to directly access GPIO including AON_GPIO and SPI. You do not need x86 at all. Please see the updated driver and sample app for

Hello, TCP support is planned for Zephyr 1.7: https://jira.zephyrproject.org/browse/ZEP-791 So it must be ready before the merge window,

NEW JIRA items within last 24 hours: 1 [ZEP-1501] Where to find Auto-PTS source code https://jira.zephyrproject.org/browse/ZEP-1501 UPDATED JIRA items within last 24 hours: 3 [ZEP-810]

how many weeks do you think it will take to have some code available in a development branch - just enough to check MQTT connectivity to a broker?

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9576 : bluetooth: controller: Split events into normal and priority - https://gerrit.zephyrproject.org/r/9586 : sanitycheck: reduce

Hello, TCP-based sample code will be submitted once TCP is ready. Regards, Flavio

Hi, You can use IPM API to send data from one core to another. See include/ipm.h Your accelerometer implements sensor API I guess? So it can trigger a callback, which in turn would send the

Hi We have connected an Accelerometer to the x86 core of C1000 (Quark_se) through SPI interface. Interrupt line of accelerometer is also connected to the AON_GPIO_3 Now I need to route the SPI

hi Flavio, do you know if the MQTT sample code - and the actual functionality to connect to a broker- is still blocked by ZEP-613? https://jira.zephyrproject.org/browse/ZEP-613 thanks

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 1 [ZEP-1483] H:4 HCI driver (h4.c) should rely on UART flow control to avoid dropping packets

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9556 : net/mqtt: Add the mqtt_rx_publish routine - https://gerrit.zephyrproject.org/r/9572 : Bluetooth: Controller: fix DLE

Hi Piotr, There was an issue on F411RE clock initialisation steps. I've submitted following change to correct it: https://gerrit.zephyrproject.org/r/9571 Hope it helps. Cheers Erwan

Hello Richard, mesh-under routing in 6LoWPan. can it stay compressed by multiple hops? yes. routing, e.g. to form a single IPv6 subnet, composed of 802.15.4 > devices and BT 4.2 devices?

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 0 CLOSED JIRA items within last 24 hours: 1 [ZEP-1496] (Fixed) gpio_pin_enable_callback error

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9547 : Bluetooth: h4: Convert TX path to be interrupt based - https://gerrit.zephyrproject.org/r/9546 : Switch logrotate to