Hi, I am not using the NRF52832 configuration on the NRF52840 SoC; I merely noted that I have successfully used the same programmer (Atmel-ICE) for interacting with NRF52832 SoCs. Yes, my

Something you mention about using NRF52832 configuration, why would you want to use that on nRF52840 SoC? You mention blinky as the example, is that the application you have trouble with? We tried

oh，sorry that I missed the dot.it is 4.1.15 actually 发自我的华为手机 -------- 原始邮件 -------- 主题：Re: 回复：[Zephyr-devel] hciconfig tools error with nrf52832 running

Hi Vinayak, Thank you for getting back to me. I just tried reverting commit 26d22b0075cf5a71f13958ec1f2727ac7167eca4, but it does not fix the application behaviour. Any other ideas are most

Earlier you said it was 4.1.15. Which one was a typo? :) Johan

imx6ull，with linux kernel version 4.15 发自我的华为手机 -------- 原始邮件 -------- 主题：Re: [Zephyr-devel] hciconfig tools error with nrf52832 running zephyr 发件人：Maureen Helm

Which NXP device are you running embedded Linux? I can check to see if we have plans to update the kernel version.

Thanks for your explanation.since the embedded linux version is bound with the chip, I cannot update it easily.So is there any ways to solve this problem without updating linux version ? At

Hi, I may have introduced a regression (bisected to) in 26d22b0075cf5a71f13958ec1f2727ac7167eca4 I notice that hci_usb sample fails to enumerate the bluetooth class device. Will get back when I have

Hi everybody, I worked on a board including a NRF52 and use the file system with NFFS but I never succeed in using it correctly. I have a lot of errors depending on the configuration parameters that

Hi, I am flashing the board using an Atmel-ICE debugger (using pyOCD 0.11.2) connected to a 10-pin debug connector soldered to the P1 footprint on the bottom of the board. I am using the same

Hi there, Can you tell us how you're flashing the board? Another Nordic Devkit, or a separate debug IC? Also copying Emanuele who's doing most of the work on this board. Regards, Carles On

Hi, I have just acquired an NRF52840 Dongle (nrf52840_pca10059) and I am facing some difficulties with board startup. When I flash a zephyr binary to the board (e.g. samples/basic/blinky) the board

Hi, I'm trying to add support for the FRDM-KL28Z board but realize, there seem to be missing support under /ext (where I see support for e.g. MKL25Z4). Would this need to be pulled from an NXP

Why don’t you use tests/bluetooth/mesh_shell ? and add your commands? Johan may be of assistance.

Hello Paul, Thanks for the input. Currenly the TCP suite is very simple and doesn't have a capability to initiate events on a peer's side of TCP connection. I am planning to add such capability and

Hi Vinayak, My sim is to create commands & send it to PDK where PDK process them & help onboard #BluetoothMesh clients to create data packets. Currently using thread triggered by button interrupt to

if you are looking for a shell, tests/bluetooth/shell could be your inspiration. if you are looking for implementing a transport over uart, then samples/bluetooth/hci_uart could be your

I found sample code under main tree i.e zephyr/samples/nfc/nfc_hello which read data on UART terminal. But it is crasing with this log ... Sample app running on: arm ***** BUS FAULT *****

Hi, Does Zephyr have (or plan to add) support for DS-5 ARM compiler? Regards, Mina