Carles, I am trying to use 1.13 and am having some issues. I can build hello_world, but when i tried to build anything with i2c, I have issues. ( drivers__i2c was created without source

Carles, appreciate the response. That was definitely one of my experiments to try. However, we have had a relatively stable base with r1.12 and I am not sure we can change to 1.13 without some

Hi Manu, The I2C driver has since been completely rewritten to use nrfx, our common driver codebase. Would it be possible for you to try with current master (or at least 1.13) to see if you still

Hi All, We have a custom board with a nrf52840 and multiple I2C devices( accel, pressure, etc). We noticed that anytime we do an I2C transaction ( reads in particular), the current draw is abnormally

I'm trying to run the sample i2c code from samples/drivers/i2c_fujitsu_fram on my board. I've tweaked the address to use the i2c address of my device, and am trying to read the who_am_i register, but

Hi all, I am using a lis2dh12 with a nrf52840, and am on occasion seeing an assertion. It happens in the i2c_nrf5_read err=0 txd=0 rxd=0 stopped=0 errsrc=0x0 ASSERTION FAIL [data->stopped] @

Charles, Thank you very much for the advice, I figured out that I built the .hex file with the incorrect parameters: cmake -DBOARD=nrf52840_pca10059 ../.. When I needed: cmake

Hi Carles, Oh !! That's Great news !!

Note that if you do not own a BLE sniffer you can still use a Nordic board to sniff traffic over the air: https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF-Sniffer Carles

Do you have a sniffer trace you can send to me email? It appears the peer is not responding to a control procedure. -Vinayak

Fix is now merged: https://github.com/zephyrproject-rtos/zephyr/pull/10391

Hi Vikrant, It appears a recent merged PR has introduced regression. https://github.com/zephyrproject-rtos/zephyr/pull/10289 I am analysing the issue, meanwhile you can revert the said commit so as

Hi, Today I synced my local repo with Zephyr master & while testing with Bluetooth Mesh App I got following Kernel OOPS: ***** Kernel OOPS! *****

Hi, Checking in if anyone has been looking at generic USB Type-C PD support? There are obviously various ways this is dealt with in products on the market, some uses more primitive PHY's + a big

Good to know that we can work on WSL On Thursday, 4 October, 2018, 2:01:30 PM IST, Cufi, Carles <carles.cufi@...> wrote:

I think you can start form looking at the ticketNordic PCA10059 support without additional Seeger debugger https://github.com/zephyrproject-rtos/zephyr/issues/9055 and related PRsAs you can see what

Hi Julien, We've recently published a set of papers considering the evaluation of OS for wearable computing. It might be worth checking some of them, once some wearable solutions are pretty

Good point. We have details about this in the nRF5x Segger page: https://docs.zephyrproject.org/latest/tools/nordic_segger.html#usb-cdc-acm-serial-port-setup Carles

Hi Julien, if you are interested in measuring networking performance, then there is a iPerf 2.x client/server sample application in Zephyr that you can use for this purpose. See samples/net/zperf

Hi, I am a professor at federal university in Brazil. I am glad to see initiatives to evaluate and comparing “RTOSes” master thesis. It seems to be a great path to go. I would suggest you to