devel@lists.zephyrproject.org

__ASSERT - transfer to error handler

Current implementation: The __ASSERT macro is extensively used in the Zephyr code base and in application code for debugging during development. In case of an ASSERT, the code jumps to __ASSERT_POST

By kristoffer.skoien@... · #5362 ·

Re: #nrf52840 #ble unstable connection #nrf52840 #ble

Hi Vinayak, Thanks for your reply. If you have any idea about this issue I can do the tests from my site. Regards, Randy Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...> 於

By Randy Chou <rchou3@...> · #5361 ·

Re: NRF52832 - setting up NFFS for the external flash W25QXXDV

Hey Faisal, we recently had trouble with the Winbond driver as well, but in the context of FCB and NVS. Something we found is that the current driver doesn't support writing across write pages. So if

By Johannes Hutter · #5360 ·

Re: #nrf52840 #ble unstable connection #nrf52840 #ble

Your config file looks ok. I will check if errata 201 will solve your issues. I will try to send you a patch by this weekend. As I will need to reproduce the issue, you will need to help me if it is

By Chettimada, Vinayak Kariappa · #5359 ·

Re: usb device network on nrf52840 platform

Jukka, Thanks...learn something new everyday! This is also a reason for NOT renaming the .conf file for your project to something unique....which, of course, I did on my first project! Cheers, Chuck

By cpmcparland@... · #5358 ·

NRF52832 - setting up NFFS for the external flash W25QXXDV

Hi At the moment I am struggling to mount W25QXXDV external flash as NFFS. We have a custom board with nrf52832 connected to the external spi flash W25QXXDV. So Zephyr provides the driver for

By faisal.saleem@... · #5357 ·

【HCI_UART】hci_uart sample cannot advertise controlled by HCI commands #nrf52832 #uart #hci

Hi guys, I met a problem with official hci_uart sample. Hope anybody can give me any advice,thanks. I use NRF52832's official develop board running hci_uart sample as a controller, I send hci commands

By icephyr · #5356 ·

How to use Nordic ppi on zephyr. #nrf52 #ppi

Hey guys, I'm tryinig to create an external counter on nrf52 for 10MHz using PPI, GPIOTE and time counter but I don't know where I'm doing it wrong. Follow my code so far. The commented part is just a

By Felipe Gabardo Gonçalves <felipe@...> · #5355 ·

Re: #nrf52840 #ble unstable connection #nrf52840 #ble

Hi Vinayak, I did some test today by using the latest master, there is no connection parameter update that means the CI keeps in 7.5ms, the connection keeps alive. I try to update the CI to 30ms

By Randy Chou <rchou3@...> · #5354 ·

Re: usb device network on nrf52840 platform

BTW, you can also say $ cmake -DOVERLAY_CONFIG=overlay-netusb.conf -DBOARD=nrf52840_pca10056 ../.. as prj.conf is automatically included anyway. Using -DCONF_FILE="prj.conf overlay-netusb.conf"

By Jukka Rissanen · #5353 ·

Re: [Question] zephyr file transfer via BLE

Hi Carles I have a question NOW Scenario BLE file transfer UART(file) Android app (mcumgr) ----------------------à

By 우승우 <du5102@...> · #5352 ·

Re: usb device network on nrf52840 platform

Andrezej, thanks for looking at this. To keep things simple, I went back to the sample project: samples/net/echo_server With the exception of adding the first line, I don't believe I have changed

By cpmcparland@... · #5351 ·

Re: usb device network on nrf52840 platform

Hi I’m unable to reproduce this problem – I mean that I did not encounter problem compiling usbd along with newlibc. Can you point prj.conf you used, or even the project?

By Puzdrowski, Andrzej · #5350 ·

Re: usb device network on nrf52840 platform

Well, as is usually the case, as soon as I'm convinced I'm stuck and send off a note, I try something else and make a bit of progress......sigh. The new project I was trying to integrate with an ecm

By cpmcparland@... · #5349 ·

usb device network on nrf52840 platform

Has anyone had any luck adding usb device networking to a project outside of samples/net/echo_server ? I have built the above project with -DCONF_FILE="prj.conf overlay-netusb.conf" and it appears to

By cpmcparland@... · #5348 ·

Re: Zephyr SDK 0.9.5 Release

Thanks!

By Marti Bolivar <marti@...> · #5347 ·

Re: Zephyr SDK 0.9.5 Release

We don’t need DTC greater than 1.4.6, so Mac & Windows should still be ok. Mostly updated the SDK version to get additional warning checks. - k

By Kumar Gala · #5346 ·

Re: Zephyr SDK 0.9.5 Release

Re DTC, I will Kumar and Carles answer. Re OpenOCD: The Zephyr SDK was always Linux only. For Mac/Windows we currently have no solution beside the documentation. Anas

By Nashif, Anas · #5345 ·

Re: [Zephyr-announce] [Zephyr-devel] Zephyr SDK 0.9.5 Release

Hi Carles, OK, thanks. So the dtc question is the same on Windows as on macOS (and remains open): what should users do to get this latest version? Will vanilla 1.4.7 continue to

By Marti Bolivar <marti@...> · #5344 ·

Re: [Zephyr-announce] [Zephyr-devel] Zephyr SDK 0.9.5 Release

Hi Martí,

By Carles Cufi · #5343 ·

Messages