Just for your information: There is a PR that adds UICR support to the nrfx flash driver: https://github.com/zephyrproject-rtos/zephyr/pull/11410 Best Regards Joe -- Johannes Hutter Mail:

Hi icephyr, I'm far from a Zephyr BLE expert, but I had this process in mind what could be a solution. As Nordic doesn't store a public BLE device address in flash I would try to implement the

Hi guys, I met a problem and hope someone can help me here. I want to use nrf52832 as a tag device and can locate it by its mac address, so I have to flash pre-assigned static address into

Sorry, I was copying the wrong code.. int i; //print adv. packet for(i=0;i<buf->len;i++) { printk("%d %02X\n",i, buf->data[i]); } //print major printk("maj: %d\n",((buf->data[25] & 0xff) * 0x100 +

Well, simple enough. int i; for(i=0; i<5; i++) { printf("i%d\n", i+1); } prints the advertisement packet's bytes in decimals and includes the UUID acc. to the kontakt.io article. Hope this helps

Hi, I am quite new to Zephyr and want to extract iBeacon Advertisement Packets. I already have access to them as a net_buf_simple structure, but I want to read the major and minor for example. I

Hi Luiz Augusto von Dentz, Thank you very much for your reply. This should give me sufficient direction to go further. The idea for our BLE central oriented platform (two boards solution) is to run

Hi, There is a listing for the Host Stack as well: https://launchstudio.bluetooth.com/ListingDetails/70189 Is your system going to run Zephyr or Linux/BlueZ as host stack? BlueZ daemon is GPL but

Hi Carles, Probably all is here for the qualification process, correct? : https://www.bluetooth.com/develop-with-bluetooth/qualification-listing Just wondering do we have extra concerns should we rely

Hi Carles, In the document: https://www.zephyrproject.org/building-a-qualified-ble-controller-with-zephyr-os-1-9/ at the end this is mentioned: “Note that Nordic’s qualification will only

Hi Carles, Great! Thanks for your confirmation on my observations regarding the Nordic SoftDevice and the Zephyr implementation. I think for a BLE host (central role) implementation we will forward

Hi Frank, The SoftDevice is Nordic’s proprietary BLE protocol stack. It consists of a binary blob that is flashed at the beginning of the flash memory and can be accessed through SV calls, and

Hi Community, Carles, Without having looking into the details for the HCI_UART implementation when using Zephyr RTOS as SW platform for implementing the BLE controller on Nordic HW, the SoftDevice

Hi, 1) If we, (provision -> unprovision -> provision) the Bluetooth Mesh Node which is based on onoff_level_lighting_vnd_app then in case of some arbitrary available Model APP key not get save on SoC

The problem has been solved by The problem has already been solved by export OPENOCD_DEFAULT_PATH

I’m also available if needed :-) For the sam0 it’s only in my spare time... /Sean

Hi, I am working on converting the SAM0 WDT implementation to the new API (https://github.com/zephyrproject-rtos/zephyr/issues/10914). Regards, Brix -- Henrik Brix Andersen

After install open-ocd and gcc-arm-none-eabi-7-2018-q2-update-mac I can build zephyr seccess,but can’t use ninja flash to flash to my hw board on macOS. Is there any file missing

Hi Kumar, We work mostly with sam4s series but also used samd21 before. I can help you with the maintenance and also align the atmel SoC series. Please let me know if you are interested in my help

Hello, After latest sync with master branch not able to build any project .... For details this is log for building hello_world app