Hi, i am currently i am working developing a lightweight crypto primitive (https://131002.net/quark/quark_full.pdf), in brief, it is a module that returns fix size hash/digest of an arbitrary stream

Hi, I want to implement a such system that there are about 10 BLE devices running with zephyr os on nrf52832, and some of them act as Central role, and some of them act as Peripheral role, and some

Hello Kumar,

Hi, from the attached .config file, the zephyr IP address is 10.128.8.81, and if you ping it from your network, you get a ICMP reply correctly but still no entry in arp cache in zephyr, is this

Is there a newer Newlib for Xtensa available? - k

Reminder: Zephyr Project: Dev Meeting When: Thursday, 6 June 2019, 8:00am to 9:00am, (GMT-07:00) America/Los Angeles Where:https://zoom.us/j/993312203 An RSVP is requested. Click here to

Hello Kumar, "Kumar Gala" <kumar.gala@...> wrote: Can we please before the release do something about very outdated Newlib in Xtensa SDK

Hi, Latest version of the SDK can be found here: https://github.com/zephyrproject-rtos/sdk-ng/releases/tag/v0.10.1-rc1 Please download and try things out and report any issues. Changes since the

HI all, As you know, the Zephyr Dev-review meeting takes place on Thursday 9AM-10AM (PDT) (18h-19h (CEST)). We want to cover topics related to the settings pattern load

Hi Martijn, Since nRF52840 is a Cortex-M4 device yet another option that you have is to use Serial Wire Output (SWO). ARM added it specifically to support trace/logging. It is a high speed interface

Reminder: Zephyr Project: APIs When: Tuesday, 4 June 2019, 9:00am to 10:00am, (GMT-07:00) America/Los Angeles Where:https://zoom.us/j/177647878 An RSVP is requested. Click here to

Hi Henrik, RTT is the way to move forward as it seems, since it will provide a clean interface both on hardware and config. Thanks for pointing me there, and thanks for the soft-serial pointers from

Hi All, I thought I would have a look at the IBM Watson IoT Platform (Bluemix) but I can't seem to connect. I followed the guides but I must be missing something. I have connected to the Quick start

Thank you very much for the agenda Carles. With it, it should be much clearer to all what to expect from the meeting, and can easily decide about joining or not BR Alberto

Agenda: - Flash: write protection and read alignment unification - GPIO: Proposal review Additional items in the "Triage" column in the GitHub project may be discussed if time permits. If you want

Hi Martinj, This Zephyr example does UART over GPIO: https://github.com/NXPmicro/zephyr/tree/soft_periph/samples/soft_periph Here's a picture with the system

Hi Martijn, If you are using a Segger J-Link probe you can use the RAM-based RTT console by setting CONFIG_RTT_CONSOLE=y See

Hi Martijn, Not sure about the exact situation you are facing, listed below please find some of the suggestions I can think of: 1. There are soft uart implementations on github, which you might be

Hi there, We have a prototype utilising the nRF52840 BME340 SoC module. Since we use a LoRaWAN module and a MAX3485 we used the two 840 uarts for connecting to these subsystems. But I do have some

Hi, I have interfaced "ENC28J60" to "PCA10056"(NRF52840) through SPI. Made necessary configurations in order to reflect hardware changes in software. Flashed sample application, "dumb_http_server" to