Hi all, I have the following setup: - nrf52 demo kit running a simple BLE peripheral application - Raspberry Pi running a BLE central application A secured connection is made (authentication based on

Hi all, Solved... It looks like when BT_GATT_CCC is set in the service MACRO define, it takes not 1 but 2 indices to advance as also there is automatically a descriptor char added if you need to

Cancelled: Zephyr Project: APIs This event has been cancelled. When: Tuesday, 31 December 2019 9:00am to 10:00am (UTC-08:00) America/Los Angeles Where: https://zoom.us/j/177647878 Organizer:

Cancelled: Zephyr Project: APIs This event has been cancelled. When: Tuesday, 24 December 2019 9:00am to 10:00am (UTC-08:00) America/Los Angeles Where: https://zoom.us/j/177647878 Organizer:

Hi all, I have a user defined BT GATT service with 2 user defined characteristics. The code is as simple as this for defining the GATT service. static struct bt_uuid_128 uuidButtonService =

Cancelled: Zephyr Project: Dev Meeting This event has been cancelled. When: Thursday, 5 December 2019 8:00am to 9:00am (UTC-08:00) America/Los

Hi Lawrence, As far as I know this one CONFIG_BT_GATT_DYNAMIC_DB=y did the trick as specified in your prj.conf as well. Br, Frank

This is what I have my prj.conf, yours might be different, an I’m not sure what I have is 100% correct: # BT

Hi all, Sorry replied the solution to myself and not to the group, but solution is to set the option "CONFIG_BT_GATT_DYNAMIC_DB=y" in the application prj.conf file, otherwise it is no longer possible

Hi Lawrence, Correct, but this one was quite easy to find as the compiler raised the issue as the function parameters no longer matched. Having to specify the option in the prj.conf to support

I had the same issue when moving forward kernel versions. The API for At the top level get rid of the bt_gatt_ccc_cfg variables (my code has two characteristics) : #ifndef NEW_BT_STACK static

Hi all, Recently I have moved from Zephyr 1.13 to V2. I ported my simple BLE peripheral application based on the sample code peripheral_hr from V1.13 to V2. However I can't seem to get it build

Hi Zephyr developers, Zephyr 2.1.0-rc3 release candidate has been tagged. Current issue status: Priority Count Has PR High 0 - Medium 17 1 Testing Zephyr release candidate is

Hi Mayank: I had a similar requirement, also without a button on the same Nordic chip. I simply copied this file into my project, and called smp_svr_init() from my main() after bluetooth was up

Reminder: Zephyr Project: APIs When: Tuesday, 3 December 2019, 9:00am to 10:00am, (GMT-08:00) America/Los Angeles Where:https://zoom.us/j/177647878 An RSVP is requested. Click here to

Hi all, This week we will focus on GPIO: - GPIO: Update on progress - Look at the PRs with driver conversion (https://github.com/zephyrproject-rtos/zephyr/issues/18530) - Check users of GPIO

Hello All, Right now I'm exploring the best way to do DFU OTA. I would like to ask that how i can do the DFU by booting the mcuboot bootloader in serial recovery mode. I have one nrf52840_pca10056

Hi Q1 – no, this mens that higher part of BLE stack runs on HCI client which has no access to nRF52840 flash at all. Q2 – mcuboot serial recovery or your proprietary protocol which can share

Hi, I want to do an DFU OTA in nRF52840 BLE chip. I have flashed mcuboot bootloader and also flashed hci_uart (To scan BLE beacons) application. This will be one time flash using JTAG. Now, I want

Am Freitag, den 22.11.2019, 08:17 -0600 schrieb Kumar Gala: Thank you, i missed the answer somehow. Your mail gives me some good pointers. Yes, it does. There is also the e.g. efm32gg12b which has