devel@lists.zephyrproject.org

Re: Discard my Previous Email. Read This.. Board Support Zephyr

Hi Muhammad: I don't think they are supported now. The following is the list of supported board now.

By Wang, Steven L <steven.l.wang@...> · #6609 ·

Discard my Previous Email. Read This.. Board Support Zephyr

Dear All, I hope you will be fine and in the best of health. I want to ask you, people, does Zephyr supports the following boards? Please advise. a. DKBLE - Development Kit, Bluegiga DKBLE Bluetooth

By Muhammad Muh <muhammad.muh83@...> · #6608 ·

Zephyr Support for DKBLE - Development Kit, Bluegiga DKBLE Bluetooth Smart, BLE1xx Modules

Dear All, I hope you will be fine and in the best of health. I want to ask you people, does Zephyr supports the following board? Please advise. DKBLE - Development Kit, Bluegiga DKBLE Bluetooth

By Muhammad Muh <muhammad.muh83@...> · #6607 ·

How to get BLE scan channel #ble

I want to get BLE scan recieve channel. Please add recieve channel parameter for BLE scan callback.

By loquat3 · #6606 ·

Re: Hci_usb on nrf52840 dongle

Hi, Does it work on Linux? I have not tested the hci_usb sample on Windows, probably some modifications are needed. Best regards Andrei Emeltchenko

By Andrei · #6605 ·

Re: nrf52 overlay file to reconfigure GPIO for buttons and leds

Hi all, Finally resolved it all. Br, Frank

By frv · #6604 ·

Re: nrf52 overlay file to reconfigure GPIO for buttons and leds

Hi, I'm getting further but not completely there. So I added these changes to my overlay file: &button0 { gpios = <&gpio0 4 GPIO_PUD_PULL_UP>; label = "Normal call button";

By frv · #6603 ·

My Bad! Re: DTS processing finds illegal return status of "ok" (as opposed to "okay") #nrf52480

Sorry for the earlier post. This always happens when I've been away from a platform during a major upgrade. I also had an overlay file redirecting spi0 pins that contained "status = "ok"".

By cpmcparland@... · #6602 ·

DTS processing finds illegal return status of "ok" (as opposed to "okay") #nrf52480

I'm getting back to an earlier NRF52840 project that uses SPI. Have upgraded to Zephyr 2.1 and finding my way around a few subtle changes. Have encountered the following problem when rebuilding an

By cpmcparland@... · #6601 ·

Hci_usb on nrf52840 dongle

+ adding the Zephyr developers mail list to assist ---------- Forwarded message --------- Hello, I'm trying to install hci_usb on nrf52840 usb dongle after i build hex file and programing it in

By Brett Preston · #6600 ·

nrf52 overlay file to reconfigure GPIO for buttons and leds

By frv · #6599 ·

RFC: libc: thread-safe newlib #21519

Dear all, I've created an RFC regarding the thread-safe integration of newlib into Zephyr. Please review and comment on this issue: https://github.com/zephyrproject-rtos/zephyr/issues/21519 Best

By Markus <kho237115@...> · #6598 ·

Re: Mesh on off model not available.

Thank you all! :)

By Urvika Gola <urvika.gola@...> · #6597 ·

Re: Mesh on off model not available.

https://docs.zephyrproject.org/latest/search.html?q=mesh+onoff From:<devel@...> on behalf of Brett Preston <bpreston@...> Date: Wednesday, 18 December 2019 at 13:26 To: Urvika Gola

By Marc Herbert · #6596 ·

Re: Mesh on off model not available.

Hi, The samples/boards/nrf52 folder was recently renamed to samples/boards/nrf https://docs.zephyrproject.org/latest/samples/boards/nrf/mesh/onoff-app/README.html Johan

By Johan Hedberg · #6595 ·

Re: Mesh on off model not available.

Hi Urvika, + adding the Zephyr development mail list to assist - Thanks -- Brett Preston Sr. Program Manager The Linux Foundation +1 (971) 303-9030 bpreston@...

By Brett Preston · #6594 ·

Re: Regarding the flash of hci_uart sample app of zephire in nrf52840

Hi, See this page: https://docs.zephyrproject.org/latest/samples/bluetooth/hci_uart/README.html In short: You still need to run the btattach command. E.g. : btattach -B /dev/ttyXXX -S 1000000 -P

By frv · #6593 ·

Regarding the flash of hci_uart sample app of zephire in nrf52840

Hi, I have build and flashed the zephire/sample/bluetooth/hci_uart on nrf52840 board and connected the board with ubuntu but hci interface was not created when checked using hciconfig. Can you please

By Amit Purwar <amit.purwar@...> · #6592 ·

Upcoming Event: Zephyr Project: APIs - Tue, 12/17/2019 9:00am-10:00am, Please RSVP #cal-reminder

Reminder: Zephyr Project: APIs When: Tuesday, 17 December 2019, 9:00am to 10:00am, (GMT-08:00) America/Los Angeles Where:https://zoom.us/j/177647878 An RSVP is requested. Click here to

By devel@lists.zephyrproject.org Calendar <devel@...> · #6591 ·

Re: MCUboot now part of the west manifest

Just a heads up, for those using MCUboot. It seems that our development mailing list has vanished. We are working to set up a new mailing list, but for now, if you are interested, it is probably

By David Brown · #6590 ·

Messages