Hi Vinayak, Thank you for the support. I have created the GH issue for the same https://github.com/zephyrproject-rtos/zephyr/issues/23319 Thanks, Mayank

Hi Mayank, When you create the GitHub issue please be specific about the exact layout of the setup you have. It is not fully clear to me if you are connecting thenrf52840_pca10056 to the i.MX6UL

Ok, Please create a GH issue and mentioned as much details as possible to help me reproduce the issue. Vinayak

Hi All, Here i'm facing the issue even after using the full UART (Tx, Rx, RTS, CTS). These 4 pins are connected & configured from both (i.MX6UL & nrf52840_pca10056). Note : nrf52840 chip is flashed

Hi Jamie, All the disconnects are Host Bluetooth stack initiated. I will need some help from BlueZ guys to throw some light here. Regards, Vinayak

Hi Vinayak > A btmon log would help identify the reason for disconnection. I have uploaded the 2 logs here:https://www.dropbox.com/s/d2yurf6nxee9wk0/btmon_logs.zip?dl=0 The Zephyr one has quite

Hi Jamie, A btmon log would help identify the reason for disconnection. > the connection parameter update still fails but even minutes later I am still connected to the remote device. This

Hi Vinayak I gave it a try this morning with the latest master build of zephyr using the HCI_USB on an nrf52840_pca10059 dongle and I don’t get the errors/timeout issues as I save previously when I

Hi, Both Mayank and Jamie, I am interested in the way the HCI packets are transported to the Host Bluetooth stack. In case of use of nRF DKs and Dongle, if using JLink debugger host firmware,

To test the PR: https://github.com/zephyrproject-rtos/zephyr/pull/23054 Just checkout the PR in an existing Zephyr project workspace, and run the extension command: west zephyr-export Then you can

Hi, Today’smeeting minutes:https://docs.google.com/document/d/1IQKBK-GcJNZG0O9QArqYfvb6Huk5xHscN-XIGEZr-z8/Notes/Minutes Status updates Status update from Wayne regarding PR#22668 Status and work

Hi Carles, I was assuming it was aimed at both of us, I’m not sure about what hardware they’re using. I’ll give it a try tomorrow with the hardware I have and see if it’s working with the

Cancelled: Zephyr Project: Dev Meeting This event has been cancelled. When: Thursday, 5 March 2020 8:00am to 9:00am (UTC-08:00) America/Los Angeles Where: https://zoom.us/j/993312203 Organizer:

Hi Jamie, I think those questions were directed to Mayank, who is experiencing the issue now. Thanks, Carles

Zephyr Toolchain Working Group When: Thursday, 5 March 2020 9:00am to 10:00am (GMT-06:00) America/Chicago Where: https://zoom.us/j/967549258 Description: Zephyr Working Group is inviting you to a

Reminder: Zephyr Toolchain Working Group When: Thursday, 5 March 2020, 9:00am to 10:00am, (GMT-06:00) America/Chicago Where:https://zoom.us/j/967549258 View Event Organizer: Maureen

Hi All, For today’s meeting let’s follow up on last meeting action items and get a status update. Also I think we should consider the short / long term goals of this WG and who has the

Hi Vinayak, > Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? When I tested it, it was using an nRF52840 PCA10059-like

Hi Mayank, Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? For those using USB_UART conversion, I am assuming you

Hi Muhammad, For the nrf52840_pca10056 you need to specify a display shield that supports ili9340, eg. west build -b nrf52840_pca10056 -- -DSHIELD=adafruit_2_8_tft_touch_v2 Note that ili9340 sample