Hi All Damn, I just made a pull request for a new spi bitbang driver (https://github.com/zephyrproject-rtos/zephyr/pull/38313/), is it too late for that to be included? Regardless, a big thanks to all

Hi all, We are pleased to announce Zephyr 2.7.0-rc1 \o/ This marks the beginning of the stabilization period leading up to our scheduled release date of 2021-10-15. During the stabilization

Hi, I’m working to enable TF-M on a custom board based on nRF53 SoC. After checking the current TF-M module, it looks like that the boards that TF-M supports have been hardcoded in the Kconfig.

Hi all, As voted during the TSC meeting on the 11th of August this year, the Zephyr Project is transitioning from Slack to Discord for real-time chat. This transition will take place starting today,

Hi there. Would it make sense to add documentation to the SDK installers? I mean, given the reference to gcc 10.3 in the announcement, I know where to find GCC documentation for it, but what

Hi Sacha, How have you configured it? Have you enabled and set the sample up to have the correct configuration options for your usecase? hcitool, hciconfig etc. are all deprecated tools, bluetoothctl

Hi, I have a problem, the nrf52840 dongle using hci_usb sample isn't working on Raspberrypi OS. Some of the BlueZ tools work with it but not others, can you check it out ? Here's a StackOverflow

Hi I am trying to publish some data using a vendor model, and I am getting error code -125 ( -EADDRNOTAVAIL). Knowing the device was successfully configured and the key was bound correctly with no

Hi I have implemented a mesh network code based on the mesh sample (samples\bluetooth\mesh), I have added two vendor models and it works great when I tested it. Now I'm trying to make these vendor

Reminder: Zephyr Project: Dev Meeting When: 09/02/2021 3:00pm to 4:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click here to

posix_apis: fails at test_posix_realtime for mimxrt1024_evk - https://github.com/zephyrproject-rtos/zephyr/issues/35703 drivers: regulator: convert to gpio_dt_spec -

Hi there, the KConfig files contain the definitions of possible configuration options. You can then set them in your prj.conf like this: CONFIG_BT_CTLR_TX_PWR_PLUS_5=y

Hi, I have a technical question, I'm trying to modify the Tx power of the hci_usb sample before flashing it to a controller. I've found in the zephyr/subsys/bluetooth/controller/Kconfig file that I

Reminder: Zephyr Project: APIs When: 08/31/2021 4:00pm to 5:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click here to

Hi all, Agenda for today: - RFC: API change: Add SMbus support to I2C API - Issue: https://github.com/zephyrproject-rtos/zephyr/issues/37101 - Pinctrl: Side-by-side comparison of two (similar)

Reminder: Zephyr Memory Footprint - biweekly discussion When: 08/30/2021 3:00pm to 4:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click

Hi, To support low power mode, you must set CONFIG_BT_MESH_LOW_POWER=y. To make the device enter low power mode, either set CONFIG_BT_MESH_LPN_AUTO=y or call bt_mesh_lpn_set(true). Note that low

Hi all, I'm trying to set up the LWM2M client sample with the ot overlay on a nrf52840 platform. So far, I have set up the OTBR and I am able to ping the outside world (net ping 64:ff9b::8.8.8.8 is

Hi I am testing the bluetooth mesh sample (samples\bluetooth\mesh) on a battery-powered device, I have to activate the low power mode in order to make it consume the least amount of power. What's

Sorry for the late cancellation. I’m on vacation this week. - k