We are pleased to announce Zephyr 2.7.0-rc2 \o/ I'm going to nickname this release "Spoon Boy". That's not in any official capacity. It just happens to be close to when The Matrix 4 trailer was

Minutes are up in the usual place: https://docs.google.com/document/d/15KUINNj7Re0GQiWYpqKvO5jgDw8oiQv3SGJfNHGaPOU/edit#heading=h.g794p090kv26 There was no time for pinctrl. "Kumar Gala via

Hi Katsuhiro and Andy, <katsuhiro@...> wrote: Ah, OK. I didn't answer your question at all. And I don't have the answer. Andy, would you mind telling us if you have any comments about

Reminder: Zephyr Project: Dev Meeting When: 09/16/2021 3:00pm to 4:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click here to

Hello, as part of the procedure to request a stable API change, here it is the RFC issue link: https://github.com/zephyrproject-rtos/zephyr/issues/38609 Ciao! -- Carlo Caione

ipc_service: Introduce RPMsg multi-core backend: - https://github.com/zephyrproject-rtos/zephyr/pull/38328 drivers: regulator: convert to gpio_dt_spec -

I have two Nrf52840 boards. One of them is flashed with open Thread Coap server and the other with Coap client. I have been trying to pair this two boards for a while, but could not succeed, I do not

Reminder: Zephyr Project: APIs When: 09/14/2021 4:00pm to 5:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click here to

Hello, Hmm... It seems that in CONFIG_USE_SWITCH=n case (ex. aarch32(*)) _current_cpu.current is updated by software interrupt handler. (*) arch/arm/core/aarch32/swap_helper.S So I wonder that why

Hello, I can check it directly. I think this is future work to achieve more faster switching than now. At this point, I want to implement most conservative one.. Best Regards, Katsuhiro Suzuki

Hi all, Agenda for today: - Pinctrl: Side-by-side comparison of two (similar) approaches proposed - PR #1: https://github.com/zephyrproject-rtos/zephyr/pull/37572 - PR #2:

Reminder: Zephyr Memory Footprint - biweekly discussion When: 09/13/2021 3:00pm to 4:00pm (UTC+00:00) UTC Where: Microsoft Teams Meeting Organizer: devel@... An RSVP is requested. Click

Here are the minutes from our last meeting:https://docs.google.com/document/d/1bnQLJKVhgI3zkk3MsSXun8onEsA8z1Rf5ohdbCHASmU/edit# I don’t have any agenda items for today. As we discussed last

Hi all, Today during a Discord conversation a user mentioned that support for the HX711 is currently in Pull Request form, but progress has stalled. I glanced through the PR and it seems to me that

Hi Markus, Do you have the include at the top of the driver you're developing which incluces the spi-device.yaml file, e.g. from one of the other LIS2XX devices: include: ["spi-device.yaml",

i'm facing a problem when i building the external_lib sample > west build -b nrf52dk_nrf52832 [1/142] Performing build step for 'mylib_project' FAILED:

Minutes: https://docs.google.com/document/d/15KUINNj7Re0GQiWYpqKvO5jgDw8oiQv3SGJfNHGaPOU/edit#heading=h.g794p090kv26

Alright, so thanks to Nick (thank you!) I have now narrowed down my problem a little. as a background, here is the C code that is causing the issue (i marked the error-origin in fat

Hi All, We're building a custom board with a no-standard power sequence. The processor and a TCA6418 GPIO expander come up first on a low-current 1V8 supply. The TCA6418 controls the enable pins for

hi i'm facing a problem when i building the external_lib sample > west build -b nrf52dk_nrf52832 [1/142] Performing build step for 'mylib_project' FAILED: