Hi Muhammad, Looks like you made a typo in the build command it should be something like: west build -b nrf52840_pca10056 samples/drivers/display -- -DSHIELD=adafruit_2_8_tft_touch_v2 See the

Thank you Mr Jan for your response. I am using nRF52840 PCA 10056 DK. Moreover, i am using now the latest CODE as mentioned by you in the previous email. Still, the following commands are giving

Hi Jamie, It is unlikely that we will release 2.0.x or 2.1.x releases in the short term, so my suggestion is that you send one PR to the 1.14 branch and another one to master. Regards,

Hi, I noticed an issue in a board file at the weekend whereby it doesn’t reboot the module after flashing it, it’s a quick fix and I can submit a PR but wanted to know how to deal with applying

Hi Muhammad, Could you switch to latest master and test with samples/drivers/display, for me that sample is working with the same adafruit display? Keep in mind that in case you have a preview

Dear Mr Jan, Thank you very much for your help. The problem is resolved until the program Building. Now when Iwest flash, it runs but I am not getting any output on the screen. I am using the

Thanks Carles, That was indeed the issue. --- thomasto@thomasto-VirtualBox:~/zephyrproject/zephyr$ cat `which west` | grep '#!' #!/usr/bin/python3 --- and

Hi Thomas, Could it be that your/usr/bin/python is not the same python you used to install west? i.e. do you have multiple python installations on your system? $ cat `which west` | grep '#!'

I'm just starting up my IAR porting effort again and thought I would just build a simple out of the box project with the standard tools, but I'm immediately running into issues. I'm on

Hi Vinayak, Thank you for the support. I have created the GH issue for the same https://github.com/zephyrproject-rtos/zephyr/issues/23319 Thanks, Mayank

Hi Mayank, When you create the GitHub issue please be specific about the exact layout of the setup you have. It is not fully clear to me if you are connecting thenrf52840_pca10056 to the i.MX6UL

Ok, Please create a GH issue and mentioned as much details as possible to help me reproduce the issue. Vinayak

Hi All, Here i'm facing the issue even after using the full UART (Tx, Rx, RTS, CTS). These 4 pins are connected & configured from both (i.MX6UL & nrf52840_pca10056). Note : nrf52840 chip is flashed

Hi Jamie, All the disconnects are Host Bluetooth stack initiated. I will need some help from BlueZ guys to throw some light here. Regards, Vinayak

Hi Vinayak > A btmon log would help identify the reason for disconnection. I have uploaded the 2 logs here:https://www.dropbox.com/s/d2yurf6nxee9wk0/btmon_logs.zip?dl=0 The Zephyr one has quite

Hi Jamie, A btmon log would help identify the reason for disconnection. > the connection parameter update still fails but even minutes later I am still connected to the remote device. This

Hi Vinayak I gave it a try this morning with the latest master build of zephyr using the HCI_USB on an nrf52840_pca10059 dongle and I don’t get the errors/timeout issues as I save previously when I

Hi, Both Mayank and Jamie, I am interested in the way the HCI packets are transported to the Host Bluetooth stack. In case of use of nRF DKs and Dongle, if using JLink debugger host firmware,

To test the PR: https://github.com/zephyrproject-rtos/zephyr/pull/23054 Just checkout the PR in an existing Zephyr project workspace, and run the extension command: west zephyr-export Then you can

Hi, Today’smeeting minutes:https://docs.google.com/document/d/1IQKBK-GcJNZG0O9QArqYfvb6Huk5xHscN-XIGEZr-z8/Notes/Minutes Status updates Status update from Wayne regarding PR#22668 Status and work