Hi Thiago, That's good to know. I will start bringing RPL back to Zephyr :) Thanks and Best Regards, Jian ---- On Mon, 15 Apr 2019 19:51:05 +0800 Thiago Silveira <thiago@...> wrote ----

Hi, you can get the error line by issuing command /opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-addr2line -e zephyr/zephyr.elf 0x200049a0 - this will show you where the error is. Best regard,

Hi All, I have an app, based on the Bluetooth peripheral_esp sample, that builds and runs as expected using zephyr 1.13.99. Using 1.14, it builds correctly but crashes with the following

"Alberto Escolar Piedras (ALPI)" <ALPI@...> wrote: Well, I was on vacation for two weeks before Apr 15. It definitely worked before that. And I saw first problematic case last week,

Thanks Paul, Do you have some indication of when did this break? BR Alberto

Hello, As was noticed in a few (multiple?) PRs, automatic reviewer assignment based on the CODEOWNERS file no longer works as expected, specifically fails to assign reviewers. A recent example of

Hi, How could I use periodic publishing in Mesh ? I have looked through the Mesh Spec (especially section 3.7.6.1), and I tried to understand in include files how to use it but I haven't understood

Hi Thea, Thanks for helping me out; have you had a chance to look into this? Sid. ---- On Sun, 14 Apr 2019 01:24:31 +0530 Thea Aldrich <aldrich.thea@...> wrote ----

Developers, I wanted to thank everyone again that’s been part of the Zephyr community and contributed to the project and this major milestone in the project’s history. As we now have an LTS

All, In my rush to get 1.14 released, I reported on the Major Enhancements from 1.13. Sorry for the confusion. Here is the corrected list of Major Enhancements in 1.14: * The Zephyr project now

Hi, We are pleased to announce the release of Zephyr kernel version 1.14.0. The 1.14.0 will be the first Zephyr LTS release that we will support for at least 2 years. Major enhancements with this

Not aware of anyone working on this, but looks like it would be trivial to add board support for it based on the 'Adafruit Trinket M0’ - k

Hi, I am trying to implement two vendor models : one client and one server. I made a little specification of that model, and it just need two messages handlers : get and status. The client will send a

Hi Nicholas, see https://github.com/zephyrproject-rtos/zephyr/issues/14467 for discussion about HTTP API support. Cheers, Jukka

Hello Nicholas, On Mon, 15 Apr 2019 18:02:46 +0000 " via Lists.Zephyrproject.Org" <Nicholas.Yameen=se.com@...> wrote: Zephyr offers a (sizable subset of) BSD Socket API, which

Hi Zephyr developers: I’m trying to enable the DFU function inside the mcuboot bootloader so that I can use the bootloader to load a custom firmware file. I followed the sample

Hi Nick, HTTP support is set to be dropped soon last I heard yes, this is because it hasn’t been converted to use the new sockets API and has no active maintainer, that may change in the future. You

Hello, I see there is an example for a dumb HTTP server for Zephyr in the samples folder. This example serves a single static web page when going to that IP address in a web browser. Is it

Hello Jian, We do use the RPL module in our project, and we will keep using it in the future. Unfortunately, as we are a very small team, we didn't have the resources to step up and maintain it then,

Hi Sid, Thanks so much for reaching out. Let me do some asking around as to which working group within Zephyr Project can best look into and, if things align, help with coordination. I'll be back