devel@lists.zephyrproject.org

CMake comments to HTML? (PR #9947 CMake build architecture documentation)

I tried the “moderncmakedomain” sphinx extension to prototype extracting CMake comments into html and it seems to work, see screenshot and PR

By Marc Herbert · #5681 ·

BUGS (Zephyr v1.14.0-rc1) Feb 11 2019

All, Wanted to provide some bug stats so we can hopefully drive the total number of bugs down to single digits for the LTS release: Some Bug details: 265:bug 125:priority: low 112:priority:

By Kumar Gala · #5680 ·

ZEPHYR_TOOLCHAIN_VARIANT=host in docs? (Was: Zephyr SDK 0.10.0-rc2 available)

… including no “toolchain" in some cases thanks to ZEPHYR_TOOLCHAIN_VARIANT=host I noticed ZEPHYR_TOOLCHAIN_VARIANT=host doesn’t seem mentioned in the documentation (I found it in the source).

By Marc Herbert · #5679 ·

Zephyr v1.14.0-rc1 Tagged

Hi all, We have just tagged Zephyr 1.14.0-rc1. All required features that have not been pushed out to 1.14 are now merged, and so we begin the stabilization phase that should run for around 4

By Kumar Gala · #5678 ·

How to encrypt advertise packet with zephyr and nrf52832 ？ #ble #nrf52832

Hi guys, I'd like to encrypt the advertise packet since some secure fields in the payload. But I did not find any clue yet. So anybody knows how to implement this feature with zephyr? Thank a lot if

By icephyr · #5677 · Edited

Re: mcuboot : nrf52: warning during build

Hi Marti, I followed your steps & its works for me. Thank You !!

By vikrant8051 <vikrant8051@...> · #5676 ·

Re: mcuboot : nrf52: warning during build

Hi Vikrant, Thanks for the report. The warnings are a known issue; please see: https://github.com/zephyrproject-rtos/zephyr/issues/13194. The reason mcuboot is not working with mainline zephyr is

By Marti Bolivar <marti@...> · #5675 ·

mcuboot : nrf52: warning during build

Hello, I am getting following warning while building mcuboot : warning: ‘enum power_states’ declared inside parameter list will not be visible outside of this definition or declaration void

By vikrant8051 <vikrant8051@...> · #5674 ·

Re: Zephyr SDK 0.10.0-rc2 available

No, Zephyr release is not tied to a toolchain. The SDK was always a one stop for everything you need to build and use zephyr, but you should be able to use any toolchain. Anas

By Nashif, Anas · #5673 ·

Re: Zephyr SDK 0.10.0-rc2 available

That's due to multilib arm and arc both 80% of the SDK if I remember correctly :) Anas

By Nashif, Anas · #5672 ·

Re: Zephyr SDK 0.10.0-rc2 available

Hello, "Paul Sokolovsky" <paul.sokolovsky@...> wrote: Ping @nashif. Btw, nice upgrade in size comparing to "non-NG" SDK - from 300MB to 700MB. No chance that we just fix up the old SDK?

By Paul Sokolovsky · #5671 ·

BT MESH SENSOR MODEL: BT_MESH_MODEL_ID_SENSOR_SRV #bluetoothmesh #zephyrbluetoothmesh

Hi All, I am looking at implementing a sensor network via BLE Mesh and am looking for any information on the implementation of the SENSOR MESH MODEL. Can anyone point me in the right direction? Many

By William Fish · #5670 ·

Re: Pairing/bonding Zephyr API? Pairing info?

Hi Johan, The QEMU concept looks great, just what I'm looking for. Thanks, Best regards, Frank

By frv · #5669 ·

Re: Code Freeze for 1.14 on Friday Feb 1st

I guess it has been postponed to this Friday: https://github.com/zephyrproject-rtos/zephyr/wiki/Program-Management Armando

By Armando Visconti · #5668 ·

Re: Pairing/bonding Zephyr API? Pairing info?

Hi Frank, Good to hear! Yes, it’s possible, however you need to use Linux as your development environment (in case you were using MacOS or Windows until now). There are instructions available

By Johan Hedberg · #5667 ·

Re: Pairing/bonding Zephyr API? Pairing info?

Hi Johan, all, It all works like a charm now, after a power cycle the BLE central applic reconnects without authentication issues anymore. So indeed flash configuration was required as demonstrated

By frv · #5666 ·

Re: Pairing/bonding Zephyr API? Pairing info?

Hi Johan, Sorry for messing up my messages on the forum. I will try to remember, unfortunately not the first time, I will do my best to do better in the future. Anyway thanks for pointing me in the

By frv · #5665 ·

Re: Pairing/bonding Zephyr API? Pairing info?

Hi Frank, Please try not to use any “edit” feature on the mailing lists web-interface. It makes it very difficult to understand what’s going on when reading your emails with a normal email

By Johan Hedberg · #5664 ·

Re: Pairing/bonding Zephyr API? Pairing info?

On Tue, Feb 5, 2019 at 02:51 PM, Johan Hedberg wrote: Note that you need to have flash storage support enabled, including CONFIG_BT_SETTINGS, in order for the bonding information to be persistently

By frv · #5663 · Edited

Re: Zephyr SDK 0.10.0-rc2 available

Hello Anas, Do we make Zephyr 1.14 release with the stable 0.9.5 SDK? "Nashif, Anas" <anas.nashif@...> wrote: [] -- Best Regards, Paul Linaro.org | Open source software for ARM SoCs Follow

By Paul Sokolovsky · #5662 ·

Messages