devel@lists.zephyrproject.org

Re: How to configure #NVS if #FCB in used for #BluetoothMesh ? #nvs #fcb #bluetoothmesh

Hi As you notice right now it is impossible to use both NVS and FCB out of the box. So you need a hack. I think finally this problem should be resolved by introduction of dedicate flash slot

By Puzdrowski, Andrzej · #4678 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

I'd second that vote as our use case also involves being able to change the tx power depending on the type of advertisement packet being sent out. -- Gurpreet SinghMember of Technical StaffMist

By Gurpreet Singh <gurpreet@...> · #4677 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Hi, https://github.com/zephyrproject-rtos/zephyr/pull/8164 Ryan, As stated in my earlier email, runtime changes need Host API and corresponding vendor HCI extensions, let alone controller

By Chettimada, Vinayak Kariappa · #4676 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, My current need is to be able to change the power setting through a config variable, as I have done outside the zephyr system. I am investigating power-range compromises

By Abderrezak Mekkaoui <ab.mekka@...> · #4675 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, My current need is to be able to change the power setting through a config variable, as I have done outside the zephyr system. I am investigating power-range compromises

By Abderrezak Mekkaoui · #4674 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

I'd like to put in a vote for changing the TX power at runtime. Our use case would be making the TX power less during advertisements and then increasing it once the connection is

By Ryan Erickson · #4673 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Vikrant, Sure, I will send a PR for that one as soon as I can (tomorrow maybe). Regards, Vinayak

By Chettimada, Vinayak Kariappa · #4672 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vinayak, As of now, I need build time configuration option to change Tx power. It will be great, if we could do it by editing prj.conf. Thank You !!

By vikrant8051 <vikrant8051@...> · #4671 ·

Re: [Zephyr-users] [Zephyr-devel] How to change Bluetooth default TX power ?

Hi Vikrant and Abderrezak, Please elaborate on your applications' use case for Tx power change. Do you want to use a build time custom Tx power setting or runtime dynamic update to Tx Power? As there

By Chettimada, Vinayak Kariappa · #4670 ·

Re: How to change Bluetooth default TX power ?

Hi All, I have the same issue. This is clearly an app variable imho. Thanks Abderrezak On 6/4/2018 9:45 AM, vikrant8051 wrote:

By Abderrezak Mekkaoui <ab.mekka@...> · #4669 ·

How to configure #NVS if #FCB in used for #BluetoothMesh ? #nvs #fcb #bluetoothmesh

Hi all, I wanna use #NVS to save #BluetoothMesh Models states. As per current implementation, #BluetoothMesh stack is using #FCB for persistent storage. If I use #NVS (with default setting) along

By vikrant8051 <vikrant8051@...> · #4668 ·

How to change Bluetooth default TX power ?

Hi, If anyone want to edit tx power of #nRF52840_PDK, then have to edit two file .. 1) $zephyr/subsys/bluetooth/controller/ll_sw/ctrl.c: L5882 2) $zephyr/subsys/bluetooth/controller/ll_sw/ll_test.c:

By vikrant8051 <vikrant8051@...> · #4667 ·

Re: File exist error on settings_subsys_init

Hi Daniele, Thanks for the suggested change. Instead of sending a patch through the mailing list, could you open a pull request? It makes it simpler to discuss the change and it will be included

By Carles Cufi · #4666 ·

File exist error on settings_subsys_init

Hello everyone, Playing around the permanent storage of bluetooth settings, I think I found an issue in the settings subsystem. Enabling the CONFIG_SETTINGS_FS option If I restart my device after the

By Daniele · #4665 ·

Re: [Zephyr-users] #BluetoothMesh ...about latest kernel OOPS & exception #bluetoothmesh

Hi Andy, commit 43553da9b2bb9e537185695899fb5184c3b17ebe Author: Andy Ross <andrew.j.ross@...> Date: Thu May 31 11:13:49 2018 -0700 kernel/sched: Fix preemption logic The

By vikrant8051 <vikrant8051@...> · #4664 ·

Re: [Zephyr-users] #BluetoothMesh ...about latest kernel OOPS & exception #bluetoothmesh

Vikrant8051 <vikrant8051@...> wrote: I was pointed to this on IRC. The symptom you've got there sounds a lot like a scheduler mistake that got fixed yesterday, where ostensibly-pended threads

By Andy Ross · #4663 ·

Re: SODAQ One V3 porting

Hi Léonard Sweet. I did the port to the Adafruit Feather M0 Basic Proto. Let me know if I can help with the port for the SODAQ board. Perhaps a simple solution could be to just add a sample

By Henrik Brix Andersen · #4662 ·

Re: [Zephyr-users] #BluetoothMesh ...about latest kernel OOPS & exception #bluetoothmesh

Hi, I've created new PR https://github.com/zephyrproject-rtos/zephyr/pull/8101. It is basically modified version of samples/bluetooth/mesh as well as inspired from

By vikrant8051 <vikrant8051@...> · #4661 ·

Re: [Zephyr-users] #BluetoothMesh ...about latest kernel OOPS & exception #bluetoothmesh

Hi, I commented line no. 3318 of subsys/bluetooth/host/hci_core.c i.e. // BT_ASSERT(buf); And after that everything is working perfectly normal. Thanks !!

By vikrant8051 <vikrant8051@...> · #4660 ·

Re: Serial Wire Output (SWO) console support

+ Krzysztof +Piotr From:<devel@...> on behalf of Ryan Erickson <ryan.erickson@...> Date: Thursday, 31 May 2018 at 23:58 To: "devel@..." <devel@...> Subject: [Zephyr-devel] Serial Wire Output (SWO)

By Carles Cufi · #4659 ·

Messages