devel@lists.zephyrproject.org

info about device tree entry for STM32 micros

I am surfing in the device tree files for stm32f412 micro I found usart3: serial@40004800 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; clocks = <&rcc

By Massimiliano Cialdi · #804 ·

Re: Switching debuggers/flashers

I believe there is no standard way in Zephyr to select debug interface so far but if you use OPENOCD_INTERFACE environment variable we would establish a standard, for OpenOCD that is. In case of

By Piotr Mienkowski · #803 ·

Switching debuggers/flashers

Hello All, Is there a standardized way to switch debugger/flash tool ? I want to use the ST-Link2 with the Olimexino board, but I have to change the openocd.conf file to do so, because the board

By Erwin Rol · #802 ·

Re: [devel] How to generate .hex image

Hi Boie， Got it, thanks! 2017年1月18日 00:41于 "Boie, Andrew P" <andrew.p.boie@...>写道：

By Tidy(Chun hua)Jiang <tidyjiang@...> · #801 ·

回复: did zephyr support armcc and fromelf toolchain?

yes, follow the instructions: Page: https://www.zephyrproject.org/doc/getting_started/getting_started.html Section: Using Custom and 3rd Party Cross

By luobaidunpaigu@sina.com <luobaidunpaigu@...> · #800 ·

Re: Shipable timeout

It seems to have figured out by itself that it has to rerun shipable. - Erwin

By Erwin Rol · #799 ·

Re: Shipable timeout

Might try a PR close/open to give shippable a kick? -- david kinder

By Kinder, David B <david.b.kinder@...> · #798 ·

Shipable timeout

Hey all, my PR caused a shipable timeout; https://app.shippable.com/github/zephyrproject-rtos/zephyr/runs/3031/3/console What do I do now ? - Erwin

By Erwin Rol · #797 ·

USB device stack and class drivers

Hi all, I got closer with Zephyr USB device stack while I wrote USB device driver for Kinetis [1]. There are a few things that are not optimal and which I would like to improve. * USB controllers

By Johann Fischer · #796 ·

Re: did zephyr support armcc and fromelf toolchain?

Hi there, No, it does not support it. As far as I know no one has tried to compile it with it. We’d like to have it working with armclang, but we haven’t looked into it yet. Regards,

By Carles Cufi · #795 ·

did zephyr support armcc and fromelf toolchain?

HI all: Did zephyr support armcc and fromelf toolchain present?

By 曹子龙 <m13824125580@...> · #794 ·

NDS32 N1068a

architecture is nds32 (not arm). i am trying to modify zephyr source code. i need more porting guide. Thank you. http://www.andestech.com/product-details01.php?cls=3&id=7 ---------- Forwarded message

By Ji Wong Park <sailfish009@...> · #793 ·

NDS32 N1068a

Hi, i want to port zephyr on n1068a cpu.

By Ji Wong Park <sailfish009@...> · #792 ·

Re: Quadrature decoder driver

Hello Jonas, Jonas Pfaff <jonas.pfaff@...> wrote: I'd think the good approach is to fit it into an existing subsystem instead of creating new entities. So indeed, a sensor subsystem seems like

By Paul Sokolovsky · #791 ·

Quadrature decoder driver

Hello, I am working on a driver for quadrature decoders on the SAM E70 SOC where the QDEC is part of the counter module. The current counter API would be a good match for it, but I am not sure that

By Jonas Pfaff · #790 ·

Re: STM32 LL SPI driver

Hi, after digging deeper, i suspect this is a measurement problem. @mbolivar I'll keep you updated about the result. Matthias

By Matthias Bösl <matthias.boesl@...> · #789 ·

Re: [PATCH] arm: board: Fix stm32f4_disco defconfig

Hi Andreas, Zephyr uses GitHub pull requests for contributions: https://www.zephyrproject.org/doc/contribute/contribute_guidelines.html You probably want to submit this as a PR instead. Cheers, Marti

By Marti Bolivar <marti.bolivar@...> · #788 ·

[PATCH] arm: board: Fix stm32f4_disco defconfig

From: Andreas Kölbl <andreas.koelbl@...> This change fixes the prescaler values in the defconfig. The prescaler values shown in the technical reference manual (STM32F407xx, p.19)

By andreas.koelbl@... · #787 ·

Re: STM32 LL SPI driver

Does this reproduce in the loopback test for you? Are you able to take an analog trace?

By Marti Bolivar <marti.bolivar@...> · #786 ·

Re: STM32 LL SPI driver

Yes, I do.

By Matthias Bösl <matthias.boesl@...> · #785 ·

Messages