Hi Erwin, Indeed, can you send a fix for this? Yes, there is a typo here. Cheers, Jukka

Hallo All, in zephyr/subsys/net/lib/app/init.c the following piece of code; int net_app_init(const char *app_info, u32_t flags, s32_t timeout) { #define LOOP_DEVIDER 10 struct net_if *iface

Hello, I'm still working on the documentation, but right now you'll need both esp-idf (for headers and the HAL library) and the ESP32 toolchain as distributed by Espressif. Building with the Zephyr

Hi Leandro/All, I’m really a big fans of both zephyr and esp, and it’s so excited to see the esp32 support in zephyr. But when I tried to build a hello world for esp32 board, it always

Because Zephyr supports a large number of boards, you’ll need to specify the specific board you’re targeting when you build a sample app, as Kien describes in his reply. The default

Hi Tamra, Please take a look at this page to see how to setup the environment, build and flash Zephyr app for Arduino 101 https://www.zephyrproject.org/doc/boards/x86/arduino_101/doc/board.html

Hi David, Thanks for putting this together. +1 to simplicity. It's also of course worth noting that we can do this slightly differently across arches if necessary, though it'd be nice to avoid that.

Hi Erwin, Can you submit the patch as a pull request and file a bug? Thanks, Anas

Background ========== On larger platforms, there will generally be a protocol for passing information from the bootloader to the operating system that it is booting. There are various standards for

Hey all, I looked into it a bit more and the ICMP checksum calculation is broken. I made a small patch to try and fix it, and it does seem to fix the problem, but I don't think the patch is good

Thank you that works. But there is also the problem with the ip-adresses. I had an Ethernet connection on my Linux host machine and on the board. Then I changed the ip-address of the host machine to

Hello, while testing my STM32 Ethernet driver I noticed that Wireshark complained about incorrect ICMP checksums. After a bit more testing I found out that it started complaining when the total

Hi Ali, Comments inline. You can use the HCI LE_Set_Host_Channel_Classification to select you own channel mapping for connections. This is available in controller only binary

For the problem of address already in use, it seems that mosquitto is already running, If you see there's a mosquitto process in "ps aux |grep mosquit", try to stop the existing one by "sudo service

Hello Zephyr Team, In the zephyr folder, I am trying to compile the beacon filein the zephyr folder (CODK/zephyr/samples/bluetooth/beacon). It compiles when Iwrite the command, "make", however I am

Hi The Nordic company referred me to your website so I may get my answer here. My question is that I need to implement my own channel mapping based on a different scenario. For example, in the list

Hello, I try to run the sample mqtt publisher on the frdm-k64f. First I changed the IP-adress on the linux host machine to 192.168.0.75. Then i type make BOARD=frdm_k64f and then I try to run

Hi Bjarne, As Justin said, for Bluetooth-related questions feel free to join us on #zephyr-bt. If you’re interested in the BLE controller (LL), and particularly when running on nRF5x hardware,

Hi, Indeed, the net_app is just a bunch of helpers that make creating networking applications a bit easier. This is not replacing any existing api (expect the semi private net_sample API). The most

Hi, We have just merged a series of commits that change the behavior of sanitycheck script and the syntax of the testcase definition file. While the syntax stays mostly the same, it was changed from