Reminder: Zephyr: Networking Forum When: 01/04/2022 8:00am to 9:00am (UTC-08:00) America/Los Angeles Where: Microsoft Teams Meeting Organizer: tsc@... An RSVP is requested. Click here to

Hi all, Agenda for today: - drivers: can: rename API functions for better consistency - PR: https://github.com/zephyrproject-rtos/zephyr/pull/41480 - Road to pinctrl: tracking progress - Issue:

Hi all, There are no open topics in the agenda to discuss during Today’s networking forum (January4th) - please let me know if youany. Nevertheless, I’ll keep the slot open, as in the previous

Hi Srikanth, I don’t know if this is causing your problem. But I see your Windows path is somewhat long at

Hi After initialisation of west by using west init zephyrproject command then i gave the west update command then it updated for sometime after that it is showing error update failed in command

Hi As I am new to zephyr project while i started installing the zephyr project in windows by the steps provided by you in getting started guide, After following your steps the west init Zephyr project

Zephyr: Toolchain Working Group When: 12/27/2021 8:00am to 9:00am (UTC-08:00) America/Los Angeles Where: Microsoft Teams Meeting Organizer: Torsten Rasmussen Description: Live meeting

Reminder: Zephyr: Toolchain Working Group When: 12/27/2021 8:00am to 9:00am (UTC-08:00) America/Los Angeles Where: Microsoft Teams Meeting Organizer: Torsten Rasmussen An RSVP is requested.

Hi Do you have verification? The executable files I compiled with cypress official software have logs. It is work well. Thx Jason Chen From: Gerson Fernando Budke

Hi there, Yes, please send a Pull Request and we’ll make sure to add@Rasmussen, Torsten as a reviewer. Thanks, Carles

Hi When I built a out of tree project and hal on a different drive on windows environment, thee error message as follow: [0/1] Re-running CMake...Including boilerplate (Zephyr base (cached)):

Hi Jason, At last part of chapter Board Revision at https://github.com/zephyrproject-rtos/zephyr/blob/main/boards/arm/cy8ckit_062_ble/doc/index.rst I mentioned that "The most complex part is short

Hi Thank you for replying. Actually, I also ran cy8ckit_062_ble_m0 boards without any log output, just like cy8ckit_062_wifi_bt_m0 boards.

Jason, I have Zephyr running with cy8ckit_062_ble_m0. I would ask you to review board configs. Compare cy8ckit_062_wifi_bt_m0 with cy8ckit_062_ble_m0. Regards, Gerson Em ter., 21 de dez. de 2021 às

I do not have the PSoC6 WiFi-BT Pioneer Kit board but I introduced the PSoC6 BLE Pioneer Kit and made all improvements using that board, which is the same SoC. What example did you use? Em ter., 21 de

Hi I want to add some more comments. I use the zephyr example with PSoC6 WiFi-BT Pioneer Kit. It has built successful and flash .elf file to boards. It seems that

Hi Gerson Thank you for replying me. My board is PSoC6 WiFi-BT Pioneer Kit, Exactly the same as the boards on the Zephyr website. The link I refer to is

Hi Jason, Are you using P13-0, P13-1 ? See below: The PSoC-6 has a weird connection with an onboard psoc programmer. It uses the same pins from the Arduino UART Connector. To enable shields, uart was

The default is active low. That is why the only other flash is active high.

Hi all I have downloaded the zephyr project completely, I plan to use the cy8ckit_062_wifi_bt_m0 board, I have built successfully, there is no error, but there is no log output in the