Hi Akash, Look the at the hardware information and setup procedure in "samples/net/rpl_border_router/README.rst". - Ravi

Hi There is a platform_whitelist in the sample.yaml file. In your case: "platform_whitelist: frdm_k64f " So you need this nxp board or have to port the sample

Hi All, I have been working on ipv6 over ble on zephyr RTOS to form mesh network.I have been successfully integrated "rpl_node"(which is in zephyr/samples/net/rpl_node) with ble(nrf52832), and it has

Hi there, If you are building the hci_uart then CONFIG_BT_PRIVACY is irrelevant because it’s only tied to the Host. What you need is CONFIG_BT_CTLR_PRIVACY, which enables privacy in the

In the "soc/arm/nxp_imx/mcimx7_m4/Kconfig.defconfig.mcimx7_m4" we default the GPIO config to "y" which will make the GPIO_IMX config default to "y" as well. I think you can have "CONFIG_GPIO=n" in

Hello, I am new zephyr user and I try to integrate the Pico-Pi i.MX7D board, during my compilations, I have this warning : warning: 'imx_gpio_driver_api' defined but not used

Hi, For me only x86 works. Regard, Flavio Ceolin

Hello, I'm new to zephyr and yet working on examples. I like the modular structure of arch, toolchain, board and the use of cmake. Thats just what I was tweaking around with. Also was thinking to use

Hello, Anyone working on a nios2 soc for the terasic #sockit board ( https://tinyurl.com/ycuuedny ) ? I will try to make an example nios2 only (i.e. without support for the onchip ARM A9) - If there

Hi Johan, Thanks for the fast reply and the clear explanation. I was hoping it would be simple :), thx! The Zephyr track for implementing the use cases we want to implement looks very promising. Keep

Hi guys, I met a problem here and hop anybody can help. I want to enable the config CONFIG_BT_PRIVACY, and according to the official document, the config depends on BT_SMP BT_CONN BT_HCI_HOST BT_HCI

Try this: https://join.slack.com/t/zephyrproject/shared_invite/enQtNDgwNzk5MTU3NTA3LWNhZjc4MzM4Nzg5NGRiNTA2OGVhN2ZlNzZmYWE5Yjc2ZDIwYjYzNGJmMzNiYmY2MTdiYmQ1M2I4NGEzMmUzZjA

Is it possible to join the Slack channel even if we don't have an email from one of the approved domains? Thanks, Lincoln Simmons lincolnsimmons@...

Hi Frank, You need to have CONFIG_BT_MESH_FRIEND=y and/or CONFIG_BT_MESH_LOW_POWER=y enabled to get access to Friendship functionality. You might also want to look at the various BT_MESH_LPN_* and

Hi Mayank, A good start would be here:https://docs.zephyrproject.org/latest/devices/index.html Then depending on what kind of driver you want to write my advice would be to look at an existing

Hi, I am new to this Zephyr platform but I have worked on some other RTOs platform for quite some time and I want to get started with this platform by writing my own driver but I didn't get the

Hallo Zephyr Community, Johan, So far I'm very impressed with the possibilities Zephyr and its BT Mesh framework already offers. I recently played around successfully with the Generic On/Off sample

All, We are going to have our first Bug Triage meeting in hope of working on reducing the bug count for the 1.14/LTS release. Will use both a Zoom call and slack channel #triage. Thanks -

Hi, thanks guys for your help. I have been using the nRF Mesh app for provisioning. Setting Interval Steps = 0 indeed solves the issue. As I do not need message transmissions, this solution is

Hi Jun, I know. No. The warning comes before settings_load() to indicate to the app developer that settings_load() will need to be called, i.e. the warning is not supposed to go away. I think