NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9231 : net: if: Add NET_IF_UP flag - https://gerrit.zephyrproject.org/r/9243 : timer: hpet: rename debug function to avoid conflict

Hi, I am looking for some sample code that shows how to connect an mqtt publisher/subscriber to a broker or gateway. The MQTT code in lib/iot requires that before the MQTT connect packet can be

Hi Marcio, Luiz,

Hi Marcio, Well I don't think the HCI interface, up to 4.2, offers this kind of interface, it does have commands to set the AD and then enable it but the link layer don't tell us exactly when the

Hi all, It´s easy to build TLM eddsytone package for Zephyr, Unfortunately the data payload inside eddystone TLM is not fixed. ADV_CNT is incremented after advertising and SEC_CNT is incremented

NEW JIRA items within last 24 hours: 6 [ZEP-1464] Review files in source tree and add missing licences https://jira.zephyrproject.org/browse/ZEP-1464 [ZEP-1466] Memory Protection Unit Support

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9214 : x86: remove nano/micro wording - https://gerrit.zephyrproject.org/r/9213 : scripts: fixed typo swab->swap -

This maintenance has now been completed. -Andy- -- Andrew J Grimberg Systems Administrator Release Engineering Team Lead The Linux Foundation

This maintenance will be starting shortly. -Andy- -- Andrew J Grimberg Systems Administrator Release Engineering Team Lead The Linux Foundation

NEW JIRA items within last 24 hours: 5 [ZEP-1457] Add SPDX Tags to Zephyr licence boilerplate https://jira.zephyrproject.org/browse/ZEP-1457 [ZEP-1455] ARM Cortex-M7: add support for

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9188 : dhcpv4: Adjust prj file selection. - https://gerrit.zephyrproject.org/r/9187 : dhcpv4_client: Remove unnecessary ETH_KSDK

What: The Linux Foundation will be performing an upgrade on the Zephyr JIRA instance as well as trying to resolve some issues with issue conversions that requires database changes When: Saturday

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 16 [ZEP-1313] porting and user guides must include a security section

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/9144 : sample: net: Updating qemu config for 802.15.4 testing - https://gerrit.zephyrproject.org/r/9096 : net: ip: Improve logging by

<tomasz.bursztyka(a)linux.intel.com> wrote: Understood. _low_ _high_ does make sense. Cheers /Marcus

Hi Marcus, It was just a naming proposal, instead of: GPIO_DS_0_HIGH GPIO_DS_0_DISCONNECT and GPIO_DS_1_HIGH GPIO_DS_1_DISCONNECT we would have: GPIO_DS_DFLT_HIGH (or

Hi Tomasz, <tomasz.bursztyka(a)linux.intel.com> wrote: The three modes standard, high, disconnected are mutually exclusive hence the proposal to represent them as three values encoded in a two bit

An example of the scenario above would be an nrf5 i2c driver that needs to use the nrf5 gpio driver to put the two pins used for clock and data into an open collector mode. Cheers /Marcus

Ummmm. If the power-up-reset state of any GPIO is "input", then no software is necessary. If this is NOT true, then on any given target, code should be putting UNUSED gpio pins to input as an initial

NEW JIRA items within last 24 hours: 7 [ZEP-1452] cross-platform support for interrupt tables/code in RAM or ROM https://jira.zephyrproject.org/browse/ZEP-1452 [ZEP-1449] samples: logger_hook