From the ELC-E Zephyr MultiImage BoF hosted by Marti there was some reference to using a tool like bitbake. There was mention of a tool called Bob. Sending a reference here for all the be able to

Hello Zephyr community, I'm working on an nrf52832 based project with Zephyr and am looking to implement two PWM channels with variable phase-offset. As far as I can tell, the nrfx drivers don't

Reminder: Zephyr Project: Dev Meeting When: Thursday, 24 October 2019, 8:00am to 9:00am, (GMT-07:00) America/Los Angeles Where:https://zoom.us/j/993312203 An RSVP is requested. Click here to

Here’s the agenda topics for this week: Board flash partitions can't be tested in tree [erwan] https://github.com/zephyrproject-rtos/zephyr/issues/20070 How to use flash with varying erase block

Wooo. It's nice work. -Steven

Awesome guys, might have to start hacking on PowerPC again!! - k

Nice work! :) -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

Hello! I have had some progress so far. I tried the same configuration setup on the NRF52-PCA10040 dev kit with the HCI-UART sample and everything seems to work as expected. Although I do not

Hi all, Below is a basic port of Zephyr to powerpc: https://github.com/mikey/zephyr/commits/powerpc It runs on both qemu and and microwatt [1]. It runs the basic tests and samples in the

Hi, I am having some problems with getting two NRF52840 USB dongles to communicate with each other with extended data ACL data lengths. I have flashed both the dongles with the Zephyr HCI-USB samples

Hi, "Muhammad Muh via Lists.Zephyrproject.Org" <muhammad.muh83=outlook.com@...> writes: I get what you mean, but we usually identify files using their paths. Example:

Reminder: Zephyr Project: APIs When: Tuesday, 22 October 2019, 9:00am to 10:00am, (GMT-07:00) America/Los Angeles Where:https://zoom.us/j/177647878 An RSVP is requested. Click here to

Dear All, It has been quite long that i emailed to this group. Hope everybody is fine and in good health. Coming towards the issue i am using nrf52840_PCA10059 Dongle. I am trying to do the example

Hi all, This week we will look at: - V4Z: Update on comments, merge if there is no objections - https://github.com/zephyrproject-rtos/zephyr/pull/17194 - EEPROM API proposal -

Hi Robert, There is a pull request for RT1010. We’re still working on getting it into a mergeable state. https://github.com/zephyrproject-rtos/zephyr/pull/19335 Maureen

Hi all, I have submitted and RFC for adding an EEPROM API to Zephyr RTOS here: https://github.com/zephyrproject-rtos/zephyr/pull/19972 The idea behind this is a simple, byte-oriented API for EEPROM

I sent an email previously and after going into the project and looking at the list of supported products, it seems as if the NXP i.MX RT1010 is not yet supported although the 1020 and others are. Any

Hi all, Optional property 'erase-block-size' is used to describe the minimum size of flash sector on which an erase operation could be applied. It is generated as a device tree generic define

Reminder: Zephyr Project: Dev Meeting When: Thursday, 17 October 2019, 8:00am to 9:00am, (GMT-07:00) America/Los Angeles Where:https://zoom.us/j/993312203 An RSVP is requested. Click here to

In my application, I need to use the nrf52840 for both BLE (as the controller) and ShockBurst. Specifically, it's the nrf52840 on the nrf9160 if it matters. I'm using the zephyr BLE stack and things