Date   

Eddystone on nrf51 / nrf52

Marcus Shawcroft <marcus.shawcroft@...>
 

Hi,


I've just tried samples/bluetooth/eddystone on nrf51 (bbc_microbit)
and so far as I can tell it doesn't boot as far as main().

Same experiment on nrf52 (pca10040) runs just fine.

Is edddystone expected run on nrf51, has anyone ever tried it?

Cheers
/Marcus


Upgrade of RTC api.

Michał Kruszewski <mkru@...>
 

I wanted to implement rtc driver for nrf chips and I think that rtc.h api is too loosely defined.
Chips from IC vendors are very  different in terms of RTC peripheral, for example:
a) different number of RTC instances
b) different number of compare/alarm registers
c) some can generate additional events like TICK for tick-less RTOS
d) some have registers for current time and format of that time can also differ
e) different size of COUNTER register (that's actually not a big issue cause you can   always implement 32 bit counter in software).

I would like to implement more advanced rtc api and I would like you to help me define how it should look like. For example:
1. How many alarms can be set on single RTC, should it be configured via Kconfig (even with single alarm register it is possible to implement it in software) or the number of alarms should equal to number of available compare registers?
2. Should we keep track of current time inside rtc driver or should there be some higher module that would only use rtc driver, if yes then what format of time should we use, should it be configurable?
3. Should we implement different modes for alarms (single shot, periodic) or maybe alarm channels should be allocated and then freed when not needed?
4. What about some extra events like TICK, OVERFLOW?
5. Should there be only one callback function? rtc_api_set_alarm could then return descriptor to alarm and inside callback function we could check what exact alarm was triggered. Or maybe we should pass pointer to callback function  as an argument to rtc_api_set_alarm function?

I want to implement that api and some drivers but I need more details from people who have impact on how the project looks like, people who can make decisions.

Michał Kruszewski

Sent with ProtonMail Secure Email.


Re: Reg: Command handling Via USB driver

Andrei
 

Hi Mahendra,

On Thu, Mar 09, 2017 at 04:54:23AM +0000, Mahendravarman Rajarao (RBEI/EAA10) wrote:
Hi

We are using Quark_C1000 controller in our project along with zephyr 1.6.
I could see zephyr 1.6 has support for USB.

I have a query.

We are currently having a requirement of send some commands via USB (from
a PC)  and based on the commands received (in the device ) we will execute
certain applications.

For this requirement I need clarifications regarding the USB driver.

I could see that the USB DFU handles command which is sent from a PC.

Do I need to expand this driver itself for my requirement or Should I use
the USB UART driver for my requirement ?
It is easier to use cdc_acm sample in samples/usb/cdc_acm, then your PC
already has the driver for it and it appears on your PC as ttyACM or
ttyUSB, then you can communicate over serial.

If you want to implement certain USB class like Bluetooth in hci_usb
sample you should look here: samples/bluetooth/hci_usb/

For other samples you need AFAIK to have certain driver, like btusb for
hci_usb, etc.

Best regards
Andrei Emeltchenko


Reg: Command handling Via USB driver

Mahendravarman Rajarao (RBEI/EAA10) <Mahendravarman.Rajarao@...>
 

Hi

 

We are using Quark_C1000 controller in our project along with zephyr 1.6.

I could see zephyr 1.6 has support for USB.

 

I have a query.

 

We are currently having a requirement of send some commands via USB (from a PC)  and based on the commands received (in the device ) we will execute certain applications.

 

For this requirement I need clarifications regarding the USB driver.

 

I could see that the USB DFU handles command which is sent from a PC.

Do I need to expand this driver itself for my requirement or Should I use the USB UART driver for my requirement ?

 

Thanks

Mahendra


Re: Checking if code is compiled for Zephyr

Paul Sokolovsky
 

On Tue, 7 Mar 2017 17:01:04 +0100
Paul Sokolovsky <Paul.Sokolovsky@linaro.org> wrote:

On Tue, 7 Mar 2017 14:38:16 +0000
Marcus Shawcroft <marcus.shawcroft@gmail.com> wrote:

On 7 March 2017 at 14:35, Paul Sokolovsky
<paul.sokolovsky@linaro.org> wrote:
Hello,

I'm trying to #ifdef a part of cross-platform code for Zephyr,
and I didn't find a clear, self-describing way to do so. Am I
missing something? Can we have something like __ZEPHYR__, _ZEPHYR
of whatever preprocessor macro to check for?
The toplevel Makefile hardwires:

-D__ZEPHYR__=1
Cool, thanks for replies! I grepped include/* for anything like that,
I checked predefined macros in gcc. Who'd new I should grep Makefiles
too ;-).
Well, too early. I do build against Zephyr, I use its configuration and
includes, but my 3rd party project doesn't use Zephyr *Makefiles*.
So, __ZEPHYR__ isn't available.

I'll prepare a patch.


--
Best Regards,
Paul

Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog


Re: Checking if code is compiled for Zephyr

Paul Sokolovsky
 

On Tue, 7 Mar 2017 14:38:16 +0000
Marcus Shawcroft <marcus.shawcroft@gmail.com> wrote:

On 7 March 2017 at 14:35, Paul Sokolovsky
<paul.sokolovsky@linaro.org> wrote:
Hello,

I'm trying to #ifdef a part of cross-platform code for Zephyr, and I
didn't find a clear, self-describing way to do so. Am I missing
something? Can we have something like __ZEPHYR__, _ZEPHYR of
whatever preprocessor macro to check for?
The toplevel Makefile hardwires:

-D__ZEPHYR__=1
Cool, thanks for replies! I grepped include/* for anything like that, I
checked predefined macros in gcc. Who'd new I should grep Makefiles
too ;-).


I don't know if that symbol is documented somewhere, but it would be
nice if it was.
+1. doc/* doesn't mention it, I'll see where it fits and drop a patch
on occasion.


--
Best Regards,
Paul

Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog


Re: Checking if code is compiled for Zephyr

flaviosantes@...
 

Hello,

__ZEPHYR__ ?

https://gerrit.zephyrproject.org/r/#/c/7470/2

Regards,
Flavio

--------------------------------------------

On Tue, 3/7/17, Marcus Shawcroft <marcus.shawcroft@gmail.com> wrote:

Subject: Re: [Zephyr-devel] Checking if code is compiled for Zephyr
To: "Paul Sokolovsky" <paul.sokolovsky@linaro.org>
Cc: "devel@lists.zephyrproject.org" <devel@lists.zephyrproject.org>
Date: Tuesday, March 7, 2017, 8:38 AM

On 7 March 2017 at 14:35,
Paul Sokolovsky <paul.sokolovsky@linaro.org>
wrote:
> Hello,
>
> I'm trying to #ifdef a part of
cross-platform code for Zephyr, and I
>
didn't find a clear, self-describing way to do so. Am I
missing
> something? Can we have
something like __ZEPHYR__, _ZEPHYR of whatever
> preprocessor macro to check for?

The toplevel Makefile
hardwires:

-D__ZEPHYR__=1

I don't know if that symbol is documented
somewhere, but it would be
nice if it
was.


Cheers
/Marcus
_______________________________________________
Zephyr-devel mailing list
Zephyr-devel@lists.zephyrproject.org
https://lists.zephyrproject.org/mailman/listinfo/zephyr-devel


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11998 : Bluetooth: Controller: Kconfig option to set public address
- https://gerrit.zephyrproject.org/r/12008 : build: Fix qemugdb target
- https://gerrit.zephyrproject.org/r/12005 : net: core: Use K_NO_WAIT when spawning RX and TX threads
- https://gerrit.zephyrproject.org/r/12007 : boards/arm/nrf52840: Disable default build of Bluetooth stack
- https://gerrit.zephyrproject.org/r/12004 : net: core: Mark RX and TX threads essential
- https://gerrit.zephyrproject.org/r/11997 : samples: net: dtlsclient RX buf count too low
- https://gerrit.zephyrproject.org/r/11992 : samples/net: Add the HTTP API to the HTTP server sample application
- https://gerrit.zephyrproject.org/r/11988 : samples: net/nats: Fix parsing of MSG messages
- https://gerrit.zephyrproject.org/r/11985 : mem_pool: Fix pool allocation, make portable
- https://gerrit.zephyrproject.org/r/11986 : samples: dtls client: DTLS client sample configuration file

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11395 : Bluetooth: AT: Reset the state during error
- https://gerrit.zephyrproject.org/r/11272 : Bluetooth: HFP HF: SCO: Handle SCO Disconnect
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/11269 : Bluetooth: HFP HF: SCO: Accept eSCO conn request
- https://gerrit.zephyrproject.org/r/11271 : Bluetooth: HFP HF: SCO: Handle synchronous_conn_complete
- https://gerrit.zephyrproject.org/r/11972 : Bluetooth: HFP HF: SCO Initiate Audio connection
- https://gerrit.zephyrproject.org/r/10645 : Bluetooth: HFP HF: Handling AG Network error
- https://gerrit.zephyrproject.org/r/11396 : Bluetooth: HFP HF: Add support for RING indication cb
- https://gerrit.zephyrproject.org/r/11268 : Bluetooth: HFP HF: SCO: Add esco supported pkt type
- https://gerrit.zephyrproject.org/r/11229 : net: ipv6: Respond to MLD query
- https://gerrit.zephyrproject.org/r/11227 : net: ipv6: Add router alert option to MLD msg
- https://gerrit.zephyrproject.org/r/11228 : tests: net: Add unit tests for mld
- https://gerrit.zephyrproject.org/r/11224 : net: if: Leave all joined IPv6 multicast groups at net_if_down
- https://gerrit.zephyrproject.org/r/11866 : tests: net: Add MLD query tests
- https://gerrit.zephyrproject.org/r/11226 : net: if: Create support to flush the TX queue
- https://gerrit.zephyrproject.org/r/11222 : net: if: Join/leave pre-defined IPv6 multicast groups
- https://gerrit.zephyrproject.org/r/11221 : net: ipv6: Add support to join/leave multicast group
- https://gerrit.zephyrproject.org/r/11970 : tests: net: Check allnodes and solicit node addresses.
- https://gerrit.zephyrproject.org/r/11843 : net: todo: Mark multicast join/leave support done
- https://gerrit.zephyrproject.org/r/11915 : net: icmpv6: Add function to unregister ICMPv6 handler
- https://gerrit.zephyrproject.org/r/10806 : Bluetooth: AVDTP: Handling Discover response
- https://gerrit.zephyrproject.org/r/11223 : net: ipv6: Notify others if we join/leave IPv6 mcast group
- https://gerrit.zephyrproject.org/r/11225 : net: ipv6: Allow joining to existing multicast address
- https://gerrit.zephyrproject.org/r/11971 : net: iface: Print error if we cannot join mcast groups
- https://gerrit.zephyrproject.org/r/11842 : net: ipv6: Collect MLD statistics
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/11458 : Bluetooth: AVDTP: Add AVDTP GetCapabilities Function Definition
- https://gerrit.zephyrproject.org/r/11627 : WIP: Security guideline
- https://gerrit.zephyrproject.org/r/11172 : soc: defconfig: Enable WDT for ATMEL SAM MCUs
- https://gerrit.zephyrproject.org/r/10886 : errno.h: Changed errno.h to make it safe to be included in assembly files.
- https://gerrit.zephyrproject.org/r/10879 : sensor/mag3110: Add mag3110 three axis magnetometer driver.
- https://gerrit.zephyrproject.org/r/11029 : watchdog: Add WDT driver for Atmel SAM SoCs
- https://gerrit.zephyrproject.org/r/11478 : net/http: Add the HTTP/1.1 API
- https://gerrit.zephyrproject.org/r/11968 : xtensa: add xtensa-hal recipe
- https://gerrit.zephyrproject.org/r/11969 : tests: Improve readabilty of ztest output
- https://gerrit.zephyrproject.org/r/11946 : WIP: Bluetooth: Controller: Fix assert on role stop/abort
- https://gerrit.zephyrproject.org/r/11787 : timer: tickless: hpet: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11479 : samples: pwm: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11332 : boards: arduino_101: enable GPIO by default
- https://gerrit.zephyrproject.org/r/11947 : sanitycheck: run legacy tests only on daily basis
- https://gerrit.zephyrproject.org/r/11263 : tests: add zephyr SPI driver api test case

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11995 : meta-zephyr-sdk:first yamllint pass
- https://gerrit.zephyrproject.org/r/11994 : zephyr: first yamllint pass
- https://gerrit.zephyrproject.org/r/11993 : ci-management: first yamllint pass
- https://gerrit.zephyrproject.org/r/11996 : Bluetooth: L2CAP: Add TX queueing for LE CoC
- https://gerrit.zephyrproject.org/r/11984 : samples/logger-hook: fix usage of ring buffer
- https://gerrit.zephyrproject.org/r/12006 : net/trickle: Include net_core.h in order to define NET_ASSERT
- https://gerrit.zephyrproject.org/r/12003 : Bluetooth: Controller: Run all enqueued mayfly before disable
- https://gerrit.zephyrproject.org/r/11999 : nrf_rtc_timer: clear events and counter when disabling sys_clock
- https://gerrit.zephyrproject.org/r/11987 : riscv32: fixed build warnings for obj_tracing
- https://gerrit.zephyrproject.org/r/11980 : drivers/ieee802154: Added RAW device to nRF5 radio driver
- https://gerrit.zephyrproject.org/r/11983 : samples: net: echo-server: Fix conditional around net_if_ipv4_addr_add()
- https://gerrit.zephyrproject.org/r/11982 : net: shell: Fix missing return when IPv6 disabled
- https://gerrit.zephyrproject.org/r/11981 : Update minion baseline to latest cross-project
- https://gerrit.zephyrproject.org/r/11941 : global: first yamllint pass
- https://gerrit.zephyrproject.org/r/11769 : build: Fix qemugdb target
- https://gerrit.zephyrproject.org/r/11977 : hci_usb: Add project configuration for tinyTile board.
- https://gerrit.zephyrproject.org/r/11976 : hci_usb: Fix incorrect length log
- https://gerrit.zephyrproject.org/r/11897 : quark_se: Fix Bluetooth settings for NBLE
- https://gerrit.zephyrproject.org/r/11805 : Bluetooth: L2CAP: Move functions in preparation for queuing
- https://gerrit.zephyrproject.org/r/11756 : nrf_rtc_timer: clear events and counter when disabling sys_clock
- https://gerrit.zephyrproject.org/r/11864 : arduino_101: fix default ROM size
- https://gerrit.zephyrproject.org/r/11852 : samples: grove: add missing testcase.ini
- https://gerrit.zephyrproject.org/r/11772 : xt-sim: set default stack size for IPM console receiver
- https://gerrit.zephyrproject.org/r/11771 : ipm_console: add Kconfig for receiver stack size


Re: Checking if code is compiled for Zephyr

Marcus Shawcroft <marcus.shawcroft@...>
 

On 7 March 2017 at 14:35, Paul Sokolovsky <paul.sokolovsky@linaro.org> wrote:
Hello,

I'm trying to #ifdef a part of cross-platform code for Zephyr, and I
didn't find a clear, self-describing way to do so. Am I missing
something? Can we have something like __ZEPHYR__, _ZEPHYR of whatever
preprocessor macro to check for?
The toplevel Makefile hardwires:

-D__ZEPHYR__=1

I don't know if that symbol is documented somewhere, but it would be
nice if it was.


Cheers
/Marcus


Checking if code is compiled for Zephyr

Paul Sokolovsky
 

Hello,

I'm trying to #ifdef a part of cross-platform code for Zephyr, and I
didn't find a clear, self-describing way to do so. Am I missing
something? Can we have something like __ZEPHYR__, _ZEPHYR of whatever
preprocessor macro to check for?


Thanks,
Paul

Linaro.org | Open source software for ARM SoCs
Follow Linaro: http://www.facebook.com/pages/Linaro
http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11977 : hci_usb: Add project configuration for tinyTile board.
- https://gerrit.zephyrproject.org/r/11976 : hci_usb: Fix incorrect length log
- https://gerrit.zephyrproject.org/r/11972 : Bluetooth: HFP HF: SCO Initiate Audio connection
- https://gerrit.zephyrproject.org/r/11970 : tests: net: Check allnodes and solicit node addresses.
- https://gerrit.zephyrproject.org/r/11971 : net: iface: Print error if we cannot join mcast groups
- https://gerrit.zephyrproject.org/r/11969 : tests: Improve readabilty of ztest output

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11805 : Bluetooth: L2CAP: Add TX queueing for LE CoC
- https://gerrit.zephyrproject.org/r/10879 : sensor/mag3110: Add mag3110 three axis magnetometer driver.
- https://gerrit.zephyrproject.org/r/11458 : Bluetooth: AVDTP: Add AVDTP GetCapabilities Function Definition
- https://gerrit.zephyrproject.org/r/10806 : Bluetooth: AVDTP: Handling Discover response
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/11271 : Bluetooth: HFP HF: SCO: Handle synchronous_conn_complete
- https://gerrit.zephyrproject.org/r/11268 : Bluetooth: HFP HF: SCO: Add esco supported pkt type
- https://gerrit.zephyrproject.org/r/11395 : Bluetooth: AT: Reset the state during error
- https://gerrit.zephyrproject.org/r/11272 : Bluetooth: HFP HF: SCO: Handle SCO Disconnect
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/11269 : Bluetooth: HFP HF: SCO: Accept eSCO conn request
- https://gerrit.zephyrproject.org/r/11396 : Bluetooth: HFP HF: Add support for RING indication cb
- https://gerrit.zephyrproject.org/r/10645 : Bluetooth: HFP HF: Handling AG Network error
- https://gerrit.zephyrproject.org/r/11223 : net: ipv6: Notify others if we join/leave IPv6 mcast group
- https://gerrit.zephyrproject.org/r/11228 : tests: net: Add unit tests for mld
- https://gerrit.zephyrproject.org/r/11229 : net: ipv6: Respond to MLD query
- https://gerrit.zephyrproject.org/r/11226 : net: if: Create support to flush the TX queue
- https://gerrit.zephyrproject.org/r/11224 : net: if: Leave all joined IPv6 multicast groups at net_if_down
- https://gerrit.zephyrproject.org/r/11866 : tests: net: Add MLD query tests
- https://gerrit.zephyrproject.org/r/11227 : net: ipv6: Add router alert option to MLD msg
- https://gerrit.zephyrproject.org/r/11222 : net: if: Join/leave pre-defined IPv6 multicast groups
- https://gerrit.zephyrproject.org/r/11915 : net: icmpv6: Add function to unregister ICMPv6 handler
- https://gerrit.zephyrproject.org/r/11225 : net: ipv6: Allow joining to existing multicast address
- https://gerrit.zephyrproject.org/r/11842 : net: ipv6: Collect MLD statistics
- https://gerrit.zephyrproject.org/r/11843 : net: todo: Mark multicast join/leave support done
- https://gerrit.zephyrproject.org/r/11221 : net: ipv6: Add support to join/leave multicast group
- https://gerrit.zephyrproject.org/r/11946 : Bluetooth: Controller: Avoid asserting on advertiser stop
- https://gerrit.zephyrproject.org/r/11964 : Bluetooth: Controller: Dont assert on stop/abort race condition
- https://gerrit.zephyrproject.org/r/11944 : Bluetooth: samples: Add device name to scan_adv sample
- https://gerrit.zephyrproject.org/r/4489 : Bluetooth: SDP: Server: Support ServiceAttributeRequest
- https://gerrit.zephyrproject.org/r/9447 : Bluetooth: SDP: Server: Support ServiceSearchAttributeRequest
- https://gerrit.zephyrproject.org/r/11236 : arm: Support for new ARM boards (discovery STM32F4 and STM32F429)
- https://gerrit.zephyrproject.org/r/11187 : tests: kernel: add test point k_cpu_atomic_idle
- https://gerrit.zephyrproject.org/r/11029 : watchdog: Add WDT driver for Atmel SAM SoCs
- https://gerrit.zephyrproject.org/r/11786 : kernel: tickless: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11785 : kernel: tickless: Add function to check if list contains multiple nodes
- https://gerrit.zephyrproject.org/r/11784 : kernel: tickless: Make scheduling time unit ms or us instead of ticks

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11978 : eth/mcux: Fix Kconfig help formatting.
- https://gerrit.zephyrproject.org/r/11979 : eth/mcux: Turn down the PHY debug verbosity.
- https://gerrit.zephyrproject.org/r/11975 : drivers/ieee802154: Added RAW mode support to nRF5 radio driver
- https://gerrit.zephyrproject.org/r/11942 : Bluetooth: Controller: Run all enqueued mayfly before disable


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11968 : xtensa: add xtensa-hal recipe
- https://gerrit.zephyrproject.org/r/11965 : xtensa: add shared xtensa-config recipe
- https://gerrit.zephyrproject.org/r/11966 : xtensa: move xtensa configuration outside build scripts
- https://gerrit.zephyrproject.org/r/11967 : xtensa: switch toolchain to shared overlay
- https://gerrit.zephyrproject.org/r/11964 : Bluetooth: Controller: Dont assert on stop/abort race condition
- https://gerrit.zephyrproject.org/r/11947 : sanitycheck: run legacy tests only on daily basis
- https://gerrit.zephyrproject.org/r/11946 : Bluetooth: Controller: Avoid asserting on advertiser stop

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11545 : scripts:nrf: Add 'make flash' for nrf boards.
- https://gerrit.zephyrproject.org/r/11478 : net/http: Add the HTTP/1.1 API

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11939 : samples/coaps_server: Don't error if the packet doesn't have payload


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11945 : DO NOT MERGE: Bluetooth: scan_adv: Use more aggressive advertising
- https://gerrit.zephyrproject.org/r/11915 : net: icmpv6: Add function to unregister ICMPv6 handler
- https://gerrit.zephyrproject.org/r/11944 : Bluetooth: samples: Add device name to scan_adv sample
- https://gerrit.zephyrproject.org/r/11942 : Bluetooth: Controller: Run all enqueued mayfly before disable
- https://gerrit.zephyrproject.org/r/11941 : first pass: yamllint
- https://gerrit.zephyrproject.org/r/11940 : figure out what gerrit comment triggered the job
- https://gerrit.zephyrproject.org/r/11939 : samples/coaps_server: Don't error if the packet doesn't have payload
- https://gerrit.zephyrproject.org/r/11934 : TEST: ignore kjroerepkfkpoe fpokpoe kgpokegpo krepog krepof keporkepork pfoekrfpokrepfoke rpofkerp fperkforpoekrpo
- https://gerrit.zephyrproject.org/r/11916 : Merge net branch into master

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11897 : quark_se: Fix Bluetooth settings for NBLE
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/11225 : net: ipv6: Allow joining to existing multicast address
- https://gerrit.zephyrproject.org/r/11843 : net: todo: Mark multicast join/leave support done
- https://gerrit.zephyrproject.org/r/11842 : net: ipv6: Collect MLD statistics
- https://gerrit.zephyrproject.org/r/11229 : net: ipv6: Respond to MLD query
- https://gerrit.zephyrproject.org/r/11224 : net: if: Leave all joined IPv6 multicast groups at net_if_down
- https://gerrit.zephyrproject.org/r/11227 : net: ipv6: Add router alert option to MLD msg
- https://gerrit.zephyrproject.org/r/11223 : net: ipv6: Notify others if we join/leave IPv6 mcast group
- https://gerrit.zephyrproject.org/r/11222 : net: if: Join/leave pre-defined IPv6 multicast groups
- https://gerrit.zephyrproject.org/r/11226 : net: if: Create support to flush the TX queue
- https://gerrit.zephyrproject.org/r/11866 : tests: net: Add MLD query tests
- https://gerrit.zephyrproject.org/r/11228 : tests: net: Add unit tests for mld
- https://gerrit.zephyrproject.org/r/11221 : net: ipv6: Add support to join/leave multicast group
- https://gerrit.zephyrproject.org/r/11844 : qemu: allow user specified qemu binary
- https://gerrit.zephyrproject.org/r/11263 : tests: add zephyr SPI driver api test case
- https://gerrit.zephyrproject.org/r/11479 : samples: pwm: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11172 : soc: defconfig: Enable WDT for ATMEL SAM MCUs
- https://gerrit.zephyrproject.org/r/11883 : TEST: DO NOT MERGE
- https://gerrit.zephyrproject.org/r/11029 : watchdog: Add WDT driver for Atmel SAM SoCs
- https://gerrit.zephyrproject.org/r/11545 : scripts:nrf: Add 'make flash' for nrf boards.
- https://gerrit.zephyrproject.org/r/11733 : tests: add zephyr flash reentrancy case

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11938 : verify: disable phases, enable old scripts
- https://gerrit.zephyrproject.org/r/11937 : Revert "trigger: add a new trigger event that builds ignoring failures try 3"
- https://gerrit.zephyrproject.org/r/11936 : trigger: add a new trigger event that builds ignoring failures try 3
- https://gerrit.zephyrproject.org/r/11935 : Revert "trigger: add a new trigger event that builds ignoring failures try 2"
- https://gerrit.zephyrproject.org/r/11931 : net: tcp: fix NET_TCP_CLOSED state propagatation
- https://gerrit.zephyrproject.org/r/11932 : net: tcp: remove net_tcp_set_state() function
- https://gerrit.zephyrproject.org/r/11933 : trigger: add a new trigger event that builds ignoring failures try 2
- https://gerrit.zephyrproject.org/r/11929 : Revert "trigger: add a new trigger event that builds ignoring failures"
- https://gerrit.zephyrproject.org/r/11928 : run_phases: clarify global summary further
- https://gerrit.zephyrproject.org/r/11918 : net: ip: Address type mismatch warnings
- https://gerrit.zephyrproject.org/r/11922 : trigger: add a new trigger event that builds ignoring failures
- https://gerrit.zephyrproject.org/r/11926 : zephyr.yaml: add missing '' to reply-to fields
- https://gerrit.zephyrproject.org/r/11927 : add_reviewers: completely ignore missing authors
- https://gerrit.zephyrproject.org/r/11925 : add_reviewers: switch use Git-Revision to avoid ID collisions
- https://gerrit.zephyrproject.org/r/11924 : retry_ssh: distinguish between connectivity/remote issues
- https://gerrit.zephyrproject.org/r/11921 : add_reviewers: classify some errors as warnings + set-reviewers takes CID only
- https://gerrit.zephyrproject.org/r/11920 : phases_add_reviewers: use numerical change ID instead of Change-ID
- https://gerrit.zephyrproject.org/r/11919 : add_reviewers: use python library, more reliable
- https://gerrit.zephyrproject.org/r/11896 : net: tcp: Add tcp options length
- https://gerrit.zephyrproject.org/r/11877 : samples/coaps_server: Don't error if the packet doesn't have payload
- https://gerrit.zephyrproject.org/r/11911 : net: bt: Place ll address type together with other assignments
- https://gerrit.zephyrproject.org/r/11910 : net: bt: Fix setting ll addresses to possible invalid pointers
- https://gerrit.zephyrproject.org/r/11913 : tests: sprintf: fixed sprintf usage
- https://gerrit.zephyrproject.org/r/11882 : run_phases: upload comments via JSON
- https://gerrit.zephyrproject.org/r/11900 : Bluetooth: samples: Add combined observer & broadcaster app
- https://gerrit.zephyrproject.org/r/11862 : net: ip: Address type mismatch warnings
- https://gerrit.zephyrproject.org/r/11905 : net: 6lo: Fix invalid check on context id
- https://gerrit.zephyrproject.org/r/11904 : net: 6lo: Fix tiny style and comments issues
- https://gerrit.zephyrproject.org/r/11903 : net: 6lo: Fix invalid hoplimit uncompression
- https://gerrit.zephyrproject.org/r/11906 : net: 6lo: Fix compress bit calculation
- https://gerrit.zephyrproject.org/r/11912 : release-notes: Add information about networking


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11897 : quark_se: Fix Bluetooth settings for NBLE
- https://gerrit.zephyrproject.org/r/11862 : net: ip: Address type mismatch warnings
- https://gerrit.zephyrproject.org/r/11912 : release-notes: Add information about networking
- https://gerrit.zephyrproject.org/r/11913 : tests: sprintf: fixed sprintf usage
- https://gerrit.zephyrproject.org/r/11911 : net: bt: Place ll address type together with other assignments
- https://gerrit.zephyrproject.org/r/11910 : net: bt: Fix setting ll addresses to possible invalid pointers
- https://gerrit.zephyrproject.org/r/11900 : Bluetooth: samples: Add combined observer & broadcaster app
- https://gerrit.zephyrproject.org/r/11879 : arm: update NXP HAL drivers files to the SDK 2.1
- https://gerrit.zephyrproject.org/r/11896 : net: tcp: add tcp options length
- https://gerrit.zephyrproject.org/r/11895 : tests:drivers:uart: clean up llvm/icx build warnings
- https://gerrit.zephyrproject.org/r/11883 : TEST: DO NOT MERGE
- https://gerrit.zephyrproject.org/r/11885 : tests: fix disabling of GPIO interrupt issue
- https://gerrit.zephyrproject.org/r/11882 : run_phases: WIP upload comments via JSON
- https://gerrit.zephyrproject.org/r/11880 : tests: add zephyr HMC5883L sensor case
- https://gerrit.zephyrproject.org/r/11877 : samples/coaps: Do not error if the packet doesn't have payloads
- https://gerrit.zephyrproject.org/r/11864 : arduino_101: fix default ROM size
- https://gerrit.zephyrproject.org/r/11861 : arm: Support for SPI driver in NXP devices
- https://gerrit.zephyrproject.org/r/11860 : arm: HAL files for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11852 : samples: grove: add missing testcase.ini

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/4489 : Bluetooth: SDP: Server: Support ServiceAttributeRequest
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/9447 : Bluetooth: SDP: Server: Support ServiceSearchAttributeRequest
- https://gerrit.zephyrproject.org/r/11216 : tests: kernel: added clock_test
- https://gerrit.zephyrproject.org/r/11844 : qemu: allow user specified qemu binary
- https://gerrit.zephyrproject.org/r/11837 : tests: add zephyr bme280 sensor case
- https://gerrit.zephyrproject.org/r/11385 : arm: Support for new ARM board FRDM-KL25Z
- https://gerrit.zephyrproject.org/r/11187 : tests: kernel: add test point k_cpu_atomic_idle
- https://gerrit.zephyrproject.org/r/11263 : tests: add zephyr SPI driver api test case
- https://gerrit.zephyrproject.org/r/11214 : tests: add zephyr pinmux driver api test case
- https://gerrit.zephyrproject.org/r/10140 : tests/gpio: enable gpio cases to run on more platforms
- https://gerrit.zephyrproject.org/r/11838 : tests: add zephyr DHT sensor cases
- https://gerrit.zephyrproject.org/r/11784 : kernel: tickless: Make scheduling time unit ms or us instead of ticks
- https://gerrit.zephyrproject.org/r/11384 : arm: Support for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11831 : dts: kinetis: bluetooth: Add overlay for BT
- https://gerrit.zephyrproject.org/r/11761 : zephyr: add support for Eclipse project
- https://gerrit.zephyrproject.org/r/11627 : WIP: Security guideline
- https://gerrit.zephyrproject.org/r/11830 : dts: Add application overlay support.

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11901 : net: core: Fix IPv6 extension parsing
- https://gerrit.zephyrproject.org/r/11906 : net: 6lo: Fix compress bit calculation
- https://gerrit.zephyrproject.org/r/11905 : net: 6lo: Fix invalid check on context id
- https://gerrit.zephyrproject.org/r/11904 : net: 6lo: Fix tiny style and comments issues
- https://gerrit.zephyrproject.org/r/11903 : net: 6lo: Fix invalid hoplimit uncompression
- https://gerrit.zephyrproject.org/r/11902 : net: 6lo: Fix incorrect order of HLIM and NH compression
- https://gerrit.zephyrproject.org/r/11857 : ipm_console: add Kconfig for receiver stack size
- https://gerrit.zephyrproject.org/r/11858 : xt-sim: set default stack size for IPM console receiver
- https://gerrit.zephyrproject.org/r/11859 : samples: grove: add missing testcase.ini
- https://gerrit.zephyrproject.org/r/11898 : net: bt: Fix setting ll addresses to possible invalid pointers
- https://gerrit.zephyrproject.org/r/11899 : net: bt: Place ll address type together with other assignments
- https://gerrit.zephyrproject.org/r/11907 : libc: Add isalnum() to ctype.h
- https://gerrit.zephyrproject.org/r/11884 : release-notes: Add Bluetooth and Network Buffer items
- https://gerrit.zephyrproject.org/r/11887 : net: icmpv6: Remove unused variable 'len' from input calls
- https://gerrit.zephyrproject.org/r/11888 : net: icmpv6: Remove unnecessary cache pointers for src and dst
- https://gerrit.zephyrproject.org/r/11889 : net: icmpv6: Simplify debug calls
- https://gerrit.zephyrproject.org/r/11890 : net: icmpv6: Return valid verdict in case of success
- https://gerrit.zephyrproject.org/r/11891 : net: core: Fix missing verdict assignment
- https://gerrit.zephyrproject.org/r/11892 : net: core: Do not handle RPL options if RPL not enabled
- https://gerrit.zephyrproject.org/r/11893 : net: core: Remove duplicate calls
- https://gerrit.zephyrproject.org/r/11894 : net: core: Fix IPv6 extra header options handling
- https://gerrit.zephyrproject.org/r/11886 : Bluetooth: Relax minimum advertising interval for 5.0 controllers
- https://gerrit.zephyrproject.org/r/11881 : release-notes: Add ARM, libraries, and HAL sections for 1.7
- https://gerrit.zephyrproject.org/r/11878 : tests: profiling: disable em_starterkit
- https://gerrit.zephyrproject.org/r/11867 : checkpatch: report tersely so it is easier to read & filter for warnings
- https://gerrit.zephyrproject.org/r/11865 : phases: remove quotes from review message to avoid shell issues
- https://gerrit.zephyrproject.org/r/11847 : run_phases: fix up summaries and summary line to make more sense
- https://gerrit.zephyrproject.org/r/11853 : phases: further clarifications and summarizations
- https://gerrit.zephyrproject.org/r/11854 : phases: don't do CR-1 on warnings
- https://gerrit.zephyrproject.org/r/11855 : phases: Catch more warning headers
- https://gerrit.zephyrproject.org/r/11856 : phases: handle failures in the filter
- https://gerrit.zephyrproject.org/r/11851 : filter-known-issues: fix missing variable printing
- https://gerrit.zephyrproject.org/r/11850 : Bluetooth: controller: Report 5.0 compliant controller
- https://gerrit.zephyrproject.org/r/11846 : Bluetooth: Add support for Bluetooth 5.0 version specifier
- https://gerrit.zephyrproject.org/r/11845 : kernel: use k_cycle_get_32 instead of sys_cycle_get_32
- https://gerrit.zephyrproject.org/r/11806 : doc: Add doc for Redbear Nano 2
- https://gerrit.zephyrproject.org/r/11757 : drivers: enc28j60: buffer reception waits timeout
- https://gerrit.zephyrproject.org/r/11841 : net: samples: Enable CONFIG_NET_CONTEXT_NBUF_POOL in prj_bt.conf
- https://gerrit.zephyrproject.org/r/11814 : MAINTAINERS: update mantainers
- https://gerrit.zephyrproject.org/r/11782 : libc: attribute minimal libc printf style functions with __printf_like
- https://gerrit.zephyrproject.org/r/11827 : net: context: Check if conn_handler exists when binding


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11830 : dts: Add application overlay support.
- https://gerrit.zephyrproject.org/r/11844 : qemu: allow user specified qemu binary
- https://gerrit.zephyrproject.org/r/11841 : net: samples: Enable CONFIG_NET_CONTEXT_NBUF_POOL in prj_bt.conf
- https://gerrit.zephyrproject.org/r/11839 : timer: tickless: loapic: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11838 : tests: add zephyr DHT sensor cases
- https://gerrit.zephyrproject.org/r/11823 : samples: net: echo_client: Added conf for host
- https://gerrit.zephyrproject.org/r/11829 : net: ip: Address type mismatch warnings
- https://gerrit.zephyrproject.org/r/11837 : tests: add zephyr bme280 sensor case
- https://gerrit.zephyrproject.org/r/11827 : net: net_context_bind: If context has conn_handler, return error.
- https://gerrit.zephyrproject.org/r/11831 : dts: kinetis: bluetooth: Add overlay for BT
- https://gerrit.zephyrproject.org/r/11814 : MAINTAINERS: update mantainers

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11782 : libc: attribute minimal libc printf style functions with __printf_like
- https://gerrit.zephyrproject.org/r/11805 : Bluetooth: L2CAP: Add TX queueing for LE CoC
- https://gerrit.zephyrproject.org/r/11806 : doc: Add doc for Redbear Nano 2
- https://gerrit.zephyrproject.org/r/11786 : kernel: tickless: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11667 : samples: tickless: Enables tickless kernel option in some apps
- https://gerrit.zephyrproject.org/r/11787 : timer: tickless: hpet: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11785 : kernel: tickless: Add function to check if list contains multiple nodes
- https://gerrit.zephyrproject.org/r/11784 : kernel: tickless: Make scheduling time unit ms or us instead of ticks
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/11395 : Bluetooth: AT: Reset the state during error
- https://gerrit.zephyrproject.org/r/11396 : Bluetooth: HFP HF: Add support for RING indication cb
- https://gerrit.zephyrproject.org/r/11272 : Bluetooth: HFP HF: SCO: Handle SCO Disconnect
- https://gerrit.zephyrproject.org/r/11271 : Bluetooth: HFP HF: SCO: Handle synchronous_conn_complete
- https://gerrit.zephyrproject.org/r/11269 : Bluetooth: HFP HF: SCO: Accept eSCO conn request
- https://gerrit.zephyrproject.org/r/10645 : Bluetooth: HFP HF: Handling AG Network error
- https://gerrit.zephyrproject.org/r/11268 : Bluetooth: HFP HF: SCO: Add esco supported pkt type
- https://gerrit.zephyrproject.org/r/11757 : enc28j60: buffer reception waits forever
- https://gerrit.zephyrproject.org/r/9447 : Bluetooth: SDP: Server: Support ServiceSearchAttributeRequest
- https://gerrit.zephyrproject.org/r/4489 : Bluetooth: SDP: Server: Support ServiceAttributeRequest
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/11478 : net/http: Add the HTTP/1.1 API
- https://gerrit.zephyrproject.org/r/11333 : doc: Fix to bring back next/previous buttons
- https://gerrit.zephyrproject.org/r/10475 : pwm: Simple PWM driver for nRF5
- https://gerrit.zephyrproject.org/r/11733 : tests: add zephyr flash reentrancy case
- https://gerrit.zephyrproject.org/r/11479 : samples: pwm: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11384 : arm: Support for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11385 : arm: Support for new ARM board FRDM-KL25Z
- https://gerrit.zephyrproject.org/r/11766 : loapic: remove cast on call to sys_bitfield_set_bit()
- https://gerrit.zephyrproject.org/r/11756 : nrf_rtc_timer: clear events and counter when disabling sys_clock
- https://gerrit.zephyrproject.org/r/11666 : tests: add zephyr PWM reentrancy case
- https://gerrit.zephyrproject.org/r/11263 : tests: add zephyr SPI driver api test case

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11828 : net: todo: Remove TCP from TODO
- https://gerrit.zephyrproject.org/r/11825 : net: context: Check if conn_handler exists when binding
- https://gerrit.zephyrproject.org/r/11813 : Bluetooth: samples: Add hexiwear_k64 and frdm_k64f to tests
- https://gerrit.zephyrproject.org/r/11836 : Zephyr 1.7.0 rc3
- https://gerrit.zephyrproject.org/r/11835 : samples: net: NATS protocol sample
- https://gerrit.zephyrproject.org/r/11834 : lib: Add minimal JSON library
- https://gerrit.zephyrproject.org/r/11833 : tests: add zephyr uart driver api test case
- https://gerrit.zephyrproject.org/r/11832 : verify: make phases verify listen to 1.7 branch
- https://gerrit.zephyrproject.org/r/11815 : release notes: add table of contents for 1.7
- https://gerrit.zephyrproject.org/r/11818 : lib/zoap: Fix warning about signedness conversion
- https://gerrit.zephyrproject.org/r/11826 : doc: Update Linux environment setup and supported OSes
- https://gerrit.zephyrproject.org/r/11824 : verify: disable old style job
- https://gerrit.zephyrproject.org/r/11817 : verify-phases: re-enable voting
- https://gerrit.zephyrproject.org/r/11799 : kinetis: fix Kconfig indentation
- https://gerrit.zephyrproject.org/r/11748 : random: mcux: rename random_mcux to random_mcux_rnga
- https://gerrit.zephyrproject.org/r/11749 : random: add MCUX TRNG driver
- https://gerrit.zephyrproject.org/r/11750 : kw41z: enable TRNG driver
- https://gerrit.zephyrproject.org/r/11330 : lib: Add minimal JSON library
- https://gerrit.zephyrproject.org/r/11331 : samples: net: NATS protocol sample
- https://gerrit.zephyrproject.org/r/11731 : Bluetooth: SDP: Server: Filter records based on requested uuids
- https://gerrit.zephyrproject.org/r/11796 : samples/net: Fix error handling issues in IRC bot
- https://gerrit.zephyrproject.org/r/11795 : samples/net: Fix uninitialized variable error
- https://gerrit.zephyrproject.org/r/11571 : quark_se: Fix bluetooth UART dependency
- https://gerrit.zephyrproject.org/r/11753 : samples: drivers: rtc: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11754 : samples: drivers: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11457 : api: dma: Fix comments for struct dma_config
- https://gerrit.zephyrproject.org/r/11456 : tests: dma: Initialise callback enable flags
- https://gerrit.zephyrproject.org/r/11773 : doc: Update Linux environment setup and supported OSes
- https://gerrit.zephyrproject.org/r/11547 : net: buf: Add more accounting info to net_buf pool
- https://gerrit.zephyrproject.org/r/11548 : net: nbuf: Remove unnecessary debugging code
- https://gerrit.zephyrproject.org/r/11345 : net: nbuf: Fix the net_nbuf_copy() buf parameter
- https://gerrit.zephyrproject.org/r/11459 : net: nbuf: Fix net_nbuf_copy() so that original nbuf is not modified
- https://gerrit.zephyrproject.org/r/11346 : net: nbuf: Add helper function to copy buf user_data
- https://gerrit.zephyrproject.org/r/11347 : net: 6lo: Use dedicated buf pool if enabled
- https://gerrit.zephyrproject.org/r/11460 : net: 6lo: Change how net_buf is allocated in RX side
- https://gerrit.zephyrproject.org/r/11465 : net: conn: Print UDP and TCP checksum after receiving pkt
- https://gerrit.zephyrproject.org/r/11348 : net: tcp: Fix the issues with 6lo
- https://gerrit.zephyrproject.org/r/11464 : net: context: TCP packets must be send via net_tcp_send_data()
- https://gerrit.zephyrproject.org/r/11802 : net: 6lo: ieee802154: Memory leak when unfragmenting received data
- https://gerrit.zephyrproject.org/r/11613 : net: shell: Fix the info prints for net_buf pools
- https://gerrit.zephyrproject.org/r/11677 : net: nbuf: Remove obsolete reserve variable from net_nbuf
- https://gerrit.zephyrproject.org/r/11801 : net: 6lo: ieee802154: Do no try to unref NULL net_buf
- https://gerrit.zephyrproject.org/r/11735 : net: shell: Show also ISR and main stack usage
- https://gerrit.zephyrproject.org/r/11800 : net: nbuf: Print adjust value if we fail in read or write
- https://gerrit.zephyrproject.org/r/11614 : net: nbuf: Print pool name instead of address in debug prints
- https://gerrit.zephyrproject.org/r/11615 : net: nbuf: Use net_nbuf_get_frag() to allocate a fragment
- https://gerrit.zephyrproject.org/r/11616 : net: Remove link layer reserve param from IP packet creator
- https://gerrit.zephyrproject.org/r/11618 : net: nbuf: Pass ll_reserve when creating TX buffer
- https://gerrit.zephyrproject.org/r/11298 : samples: net: Use context specific net_buf pools in echo_*
- https://gerrit.zephyrproject.org/r/11678 : net: if: Clarify the documentation in net_if_send_data()
- https://gerrit.zephyrproject.org/r/11679 : net: nbuf: Remove unnecessary buf init
- https://gerrit.zephyrproject.org/r/11680 : net: nbuf: Track memory allocations
- https://gerrit.zephyrproject.org/r/11682 : net: nbuf: Create net_nbuf_frag_del() for tracking allocations
- https://gerrit.zephyrproject.org/r/11743 : net: nbuf: Do not delete the fragments in net_nbuf_unref()
- https://gerrit.zephyrproject.org/r/11803 : net: samples: echo-client: Allow UDP and TCP run at the same time
- https://gerrit.zephyrproject.org/r/11807 : net: nbuf: Print more info when trying double free net_buf
- https://gerrit.zephyrproject.org/r/11681 : net: shell: Add cmd to see net_buf allocations
- https://gerrit.zephyrproject.org/r/11561 : net: shell: Print network buffer pool information
- https://gerrit.zephyrproject.org/r/11560 : net: buf: Store name of the buffer pool
- https://gerrit.zephyrproject.org/r/11242 : net: Add net_buf pool support to each context
- https://gerrit.zephyrproject.org/r/11575 : net: nbuf: Split one global DATA pool to RX and TX DATA pools
- https://gerrit.zephyrproject.org/r/11671 : Bluetooth: GATT: Add bt_gatt_get_mtu API
- https://gerrit.zephyrproject.org/r/11668 : gpio: mcux: Revert to older GPIO device names as were used for Kinetis.
- https://gerrit.zephyrproject.org/r/11812 : subsys: gdb_server: Fix type mismatch
- https://gerrit.zephyrproject.org/r/11811 : MAINTAINERS: remove inactive maintainer from x86 and kernel core
- https://gerrit.zephyrproject.org/r/11789 : subsys: gdb_server: Fix type mismatch
- https://gerrit.zephyrproject.org/r/11809 : boards: add 96b_nitrogen board documentation
- https://gerrit.zephyrproject.org/r/11810 : MAINTAINERS: remove inactive maintainer from x86 and kernel core
- https://gerrit.zephyrproject.org/r/11808 : doc: Add Atmel SMART SAM E70 Xplained board documentation
- https://gerrit.zephyrproject.org/r/11637 : olimexino_stm32: provide button and leds for basic samples
- https://gerrit.zephyrproject.org/r/11791 : ztest: add comment about expected thread priorities
- https://gerrit.zephyrproject.org/r/11804 : boards: arduino_due: Add make flash support


port runtimeio bootloader to x86

Vara, Punit <punit.vara@...>
 

Hi

 

How can I build bootloader and zephyr to flash on x86 board (i.e. Arduino_101) ? Can someone point me to link how can to build it ? It will help me to port bootloader.

 

Any pointers how should I start porting runtimeio bootloader to x86 ?

 

Thanks

Punit Vara

 


port runtimeio bootloader to x86

Vara, Punit <punit.vara@...>
 

Hi

 

How can I build bootloader and zephyr to flash on x86 board (i.e. Arduino_101) ? Can someone point me to link how can to build it ? It will help me to port bootloader.

 

Any pointers how should I start porting runtimeio bootloader to x86 ?

 

Thanks

Punit Vara

 


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11807 : net: nbuf: Print more info when trying double free net_buf
- https://gerrit.zephyrproject.org/r/11813 : Bluetooth: samples: Add hexiwear_k64 and frdm_k64f to tests
- https://gerrit.zephyrproject.org/r/11803 : net: samples: echo-client: Allow UDP and TCP run at the same time
- https://gerrit.zephyrproject.org/r/11805 : Bluetooth: L2CAP: Add TX queueing for LE CoC
- https://gerrit.zephyrproject.org/r/11800 : net: nbuf: Print adjust value if we fail in read or write
- https://gerrit.zephyrproject.org/r/11806 : doc: Add doc for Redbear Nano 2
- https://gerrit.zephyrproject.org/r/11812 : subsys: gdb_server: Fix type mismatch
- https://gerrit.zephyrproject.org/r/11802 : net: 6lo: ieee802154: Memory leak when unfragmenting received data
- https://gerrit.zephyrproject.org/r/11801 : net: 6lo: ieee802154: Do no try to unref NULL net_buf
- https://gerrit.zephyrproject.org/r/11799 : kinetis: fix Kconfig indentation
- https://gerrit.zephyrproject.org/r/11795 : samples/net: Fix uninitialized variable error
- https://gerrit.zephyrproject.org/r/11796 : samples/net: Fix error handling issues in IRC bot
- https://gerrit.zephyrproject.org/r/11757 : enc28j60: buffer reception waits forever
- https://gerrit.zephyrproject.org/r/11787 : timer: tickless: hpet: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11784 : kernel: tickless: Make scheduling time unit ms or us instead of ticks
- https://gerrit.zephyrproject.org/r/11798 : shell: use modules' own help functions if have already defined
- https://gerrit.zephyrproject.org/r/11785 : kernel: tickless: Add function to check if list contains multiple nodes
- https://gerrit.zephyrproject.org/r/11786 : kernel: tickless: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/11781 : arm: stm32: remove duplicate setting of Kconfig symbols
- https://gerrit.zephyrproject.org/r/11780 : doc: move IP porting guide to porting section
- https://gerrit.zephyrproject.org/r/11782 : libc: attribute minimal libc printf style functions with __printf_like
- https://gerrit.zephyrproject.org/r/11773 : doc: Update Linux environment setup and supported OSes
- https://gerrit.zephyrproject.org/r/11772 : xt-sim: set default stack size for IPM console receiver
- https://gerrit.zephyrproject.org/r/11771 : ipm_console: add Kconfig for receiver stack size
- https://gerrit.zephyrproject.org/r/11769 : build: Fix qemugdb target
- https://gerrit.zephyrproject.org/r/11766 : loapic: remove cast on call to sys_bitfield_set_bit()
- https://gerrit.zephyrproject.org/r/11761 : zephyr: add support for Eclipse project

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11269 : Bluetooth: HFP HF: SCO: Accept eSCO conn request
- https://gerrit.zephyrproject.org/r/11271 : Bluetooth: HFP HF: SCO: Handle synchronous_conn_complete
- https://gerrit.zephyrproject.org/r/11272 : Bluetooth: HFP HF: SCO: Handle SCO Disconnect
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/10645 : Bluetooth: HFP HF: Handling AG Network error
- https://gerrit.zephyrproject.org/r/11575 : net: nbuf: Split one global DATA pool to RX and TX DATA pools
- https://gerrit.zephyrproject.org/r/11396 : Bluetooth: HFP HF: Add support for RING indication cb
- https://gerrit.zephyrproject.org/r/11268 : Bluetooth: HFP HF: SCO: Add esco supported pkt type
- https://gerrit.zephyrproject.org/r/11395 : Bluetooth: AT: Reset the state during error
- https://gerrit.zephyrproject.org/r/11671 : Bluetooth: GATT: Add bt_gatt_get_mtu API
- https://gerrit.zephyrproject.org/r/11242 : net: Add net_buf pool support to each context
- https://gerrit.zephyrproject.org/r/11561 : net: shell: Print network buffer pool information
- https://gerrit.zephyrproject.org/r/11560 : net: buf: Store name of the buffer pool
- https://gerrit.zephyrproject.org/r/11682 : net: nbuf: Create net_nbuf_frag_del() for tracking allocations
- https://gerrit.zephyrproject.org/r/11618 : net: nbuf: Pass ll_reserve when creating TX buffer
- https://gerrit.zephyrproject.org/r/11298 : samples: net: Use context specific net_buf pools in echo_*
- https://gerrit.zephyrproject.org/r/11681 : net: shell: Add cmd to see net_buf allocations
- https://gerrit.zephyrproject.org/r/11679 : net: nbuf: Remove unnecessary buf init
- https://gerrit.zephyrproject.org/r/11680 : net: nbuf: Track memory allocations
- https://gerrit.zephyrproject.org/r/11616 : net: Remove link layer reserve param from IP packet creator
- https://gerrit.zephyrproject.org/r/11743 : net: nbuf: Do not delete the fragments in net_nbuf_unref()
- https://gerrit.zephyrproject.org/r/11347 : net: 6lo: Use dedicated buf pool if enabled
- https://gerrit.zephyrproject.org/r/11756 : nrf_rtc_timer: clear events and counter when disabling sys_clock
- https://gerrit.zephyrproject.org/r/11548 : net: nbuf: Remove unnecessary debugging code
- https://gerrit.zephyrproject.org/r/11615 : net: nbuf: Use net_nbuf_get_frag() to allocate a fragment
- https://gerrit.zephyrproject.org/r/11678 : net: if: Clarify the documentation in net_if_send_data()
- https://gerrit.zephyrproject.org/r/11547 : net: buf: Add more accounting info to net_buf pool
- https://gerrit.zephyrproject.org/r/11613 : net: shell: Fix the info prints for net_buf pools
- https://gerrit.zephyrproject.org/r/11614 : net: nbuf: Print pool name instead of address in debug prints
- https://gerrit.zephyrproject.org/r/11677 : net: nbuf: Remove obsolete reserve variable from net_nbuf
- https://gerrit.zephyrproject.org/r/11735 : net: shell: Show also ISR and main stack usage
- https://gerrit.zephyrproject.org/r/11465 : net: conn: Print UDP and TCP checksum after receiving pkt
- https://gerrit.zephyrproject.org/r/11459 : net: nbuf: Fix net_nbuf_copy() so that original nbuf is not modified
- https://gerrit.zephyrproject.org/r/11464 : net: context: TCP packets must be send via net_tcp_send_data()
- https://gerrit.zephyrproject.org/r/11348 : net: tcp: Fix the issues with 6lo
- https://gerrit.zephyrproject.org/r/11346 : net: nbuf: Add helper function to copy buf user_data
- https://gerrit.zephyrproject.org/r/11345 : net: nbuf: Fix the net_nbuf_copy() buf parameter
- https://gerrit.zephyrproject.org/r/11460 : net: 6lo: Change how net_buf is allocated in RX side
- https://gerrit.zephyrproject.org/r/11750 : kw41z: enable TRNG driver
- https://gerrit.zephyrproject.org/r/11749 : random: add MCUX TRNG driver
- https://gerrit.zephyrproject.org/r/11748 : random: mcux: rename random_mcux to random_mcux_rnga
- https://gerrit.zephyrproject.org/r/11270 : Bluetooth: HFP HF: SCO: Enable sco conn complete in event_mask
- https://gerrit.zephyrproject.org/r/11545 : scripts:nrf: Add 'make flash' for nrf boards.
- https://gerrit.zephyrproject.org/r/11236 : arm: Support for new ARM boards (discovery STM32F4 and STM32F429)
- https://gerrit.zephyrproject.org/r/4489 : Bluetooth: SDP: Server: Support ServiceAttributeRequest
- https://gerrit.zephyrproject.org/r/11731 : Bluetooth: SDP: Server: Filter records based on requested uuids
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/9447 : Bluetooth: SDP: Server: Support ServiceSearchAttributeRequest
- https://gerrit.zephyrproject.org/r/11667 : samples: tickless: Enables tickless kernel option in some apps
- https://gerrit.zephyrproject.org/r/11478 : [WIP] net/http: Add the HTTP API
- https://gerrit.zephyrproject.org/r/11638 : net/dns: Remove outdated README file
- https://gerrit.zephyrproject.org/r/11666 : tests: add zephyr PWM reentrancy case
- https://gerrit.zephyrproject.org/r/11733 : tests: add zephyr flash reentrancy case
- https://gerrit.zephyrproject.org/r/11216 : tests: kernel: added clock_test
- https://gerrit.zephyrproject.org/r/11753 : samples: drivers: rtc: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11172 : soc: defconfig: Enable WDT for ATMEL SAM MCUs
- https://gerrit.zephyrproject.org/r/11479 : samples: pwm: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11384 : arm: Support for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11383 : arm: HAL files for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11331 : samples: net: NATS protocol sample
- https://gerrit.zephyrproject.org/r/11330 : lib: Add minimal JSON library
- https://gerrit.zephyrproject.org/r/7664 : second: test
- https://gerrit.zephyrproject.org/r/11608 : serial: stm32: Move to more traditional formatting
- https://gerrit.zephyrproject.org/r/10722 : DONT_MERGE: test that succeeds
- https://gerrit.zephyrproject.org/r/11606 : dma: stm32f4x: By default increment pointer through data passed through memory
- https://gerrit.zephyrproject.org/r/11597 : dma: stm32f4x: Add dump regs function to aid debugging
- https://gerrit.zephyrproject.org/r/11607 : serial: stm32: Give H/W a chance to set the TXE bit on transfer
- https://gerrit.zephyrproject.org/r/11489 : RFC: DON'T MERGE net/dhcpv4: Respond to link up / down events
- https://gerrit.zephyrproject.org/r/11627 : WIP: Security guideline
- https://gerrit.zephyrproject.org/r/11358 : arm: GPIO driver modifications for MKL25Z soc support
- https://gerrit.zephyrproject.org/r/11520 : arm: UART driver modifications for MKL25Z soc support
- https://gerrit.zephyrproject.org/r/3114 : DONT MERGE: - break doc
- https://gerrit.zephyrproject.org/r/5137 : DONT_MERGE: - add changes to two different branches
- https://gerrit.zephyrproject.org/r/10879 : sensor/mag3110: Add mag3110 three axis magnetometer driver.

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11791 : ztest: add comment about expected thread priorities
- https://gerrit.zephyrproject.org/r/11804 : boards: arduino_due: Add make flash support
- https://gerrit.zephyrproject.org/r/11789 : subsys: gdb_server: Fix type mismatch
- https://gerrit.zephyrproject.org/r/11811 : MAINTAINERS: remove inactive maintainer from x86 and kernel core
- https://gerrit.zephyrproject.org/r/11810 : MAINTAINERS: remove inactive maintainer from x86 and kernel core
- https://gerrit.zephyrproject.org/r/11790 : tests/common/timeout_order: reset test case thread to original prio
- https://gerrit.zephyrproject.org/r/11809 : boards: add 96b_nitrogen board documentation
- https://gerrit.zephyrproject.org/r/11808 : doc: Add Atmel SMART SAM E70 Xplained board documentation
- https://gerrit.zephyrproject.org/r/11792 : ztest: rename end-of-test semaphore
- https://gerrit.zephyrproject.org/r/11793 : ztest: shorten line longer than 80 characters
- https://gerrit.zephyrproject.org/r/11778 : net: context: Make packet_received() static
- https://gerrit.zephyrproject.org/r/11794 : run_phases: do inform of gerrit voting why's in the review summary
- https://gerrit.zephyrproject.org/r/11788 : phases: run both verify jobs in parallel, with new one not voting
- https://gerrit.zephyrproject.org/r/11768 : Revert "sys_bitfield*(): use 'void *' instead of memaddr_t"
- https://gerrit.zephyrproject.org/r/11779 : boards: add 96b_carbon board documentation
- https://gerrit.zephyrproject.org/r/11777 : re-enable phases to check for new issues
- https://gerrit.zephyrproject.org/r/11775 : run_phases: if anything failed, don't give verify+1
- https://gerrit.zephyrproject.org/r/11774 : verify: swap back to old verify
- https://gerrit.zephyrproject.org/r/11759 : spi: mcux: Rename spi driver to DSPI to match naming convention
- https://gerrit.zephyrproject.org/r/11762 : lib/zoap: Fix warning about signedness conversion
- https://gerrit.zephyrproject.org/r/11765 : verify: disable old verify
- https://gerrit.zephyrproject.org/r/11764 : filter: catch more types of of Sanity check logs
- https://gerrit.zephyrproject.org/r/11763 : phase_sanity: add more messages sanity check prints that are not errors
- https://gerrit.zephyrproject.org/r/11760 : phases_sanity: redirect all output with shell vs --logile
- https://gerrit.zephyrproject.org/r/11758 : sanity: more stuff to ignore
- https://gerrit.zephyrproject.org/r/11637 : olimexino_stm32: provide button and leds for basic samples
- https://gerrit.zephyrproject.org/r/11634 : dts: arm: Add base DTS support for Olimexino STM32 board
- https://gerrit.zephyrproject.org/r/11724 : boards: add 96b_nitrogen board documentation
- https://gerrit.zephyrproject.org/r/11729 : doc: Add Atmel SMART SAM E70 Xplained board documentation
- https://gerrit.zephyrproject.org/r/11342 : boards: arduino_due: Add make flash support
- https://gerrit.zephyrproject.org/r/11569 : eth/eth_mcux: Make promiscous mode configurable.
- https://gerrit.zephyrproject.org/r/4488 : Bluetooth: SDP: Server: Handle Service Search request
- https://gerrit.zephyrproject.org/r/11488 : net/dhcpv4: Remove !iface checks from timeout handlers.
- https://gerrit.zephyrproject.org/r/11430 : net/dhcpv4: Add missing const
- https://gerrit.zephyrproject.org/r/11442 : net/dhcpv4: Refactor SELECTING state entry.
- https://gerrit.zephyrproject.org/r/11443 : net/dhcpv4: Refactor REQUESTING state entry.
- https://gerrit.zephyrproject.org/r/11434 : net/dhcpv4: Move timers inside the net_if dhcpv4 context
- https://gerrit.zephyrproject.org/r/11439 : net/dhcpv4: Explicitly initialize net_if dhcpv4 state.
- https://gerrit.zephyrproject.org/r/11433 : net/dhcpv4: Refactor dhcpv4 message type representation.
- https://gerrit.zephyrproject.org/r/11432 : net/dhcpv4: Refactor packet construction
- https://gerrit.zephyrproject.org/r/11440 : net/dhcpv4: Refactor send_request state handling.
- https://gerrit.zephyrproject.org/r/11436 : net/dhcpv4: Adjust state names to reflect rfc2131
- https://gerrit.zephyrproject.org/r/11441 : net/dhcpv4: Refactor send_discover
- https://gerrit.zephyrproject.org/r/11435 : net/dhcpv4: Unify dhcpv4 state name printers
- https://gerrit.zephyrproject.org/r/11445 : net/dhcpv4: Introduce start/stop API and disabled state.
- https://gerrit.zephyrproject.org/r/11447 : net/dhcpv4: Use server identifier appropriately.
- https://gerrit.zephyrproject.org/r/11451 : net/dhcpv4: Support REBINDING
- https://gerrit.zephyrproject.org/r/11449 : net/dhcpv4: Fix the behaviour of ciaddr.
- https://gerrit.zephyrproject.org/r/11450 : net/dhcpv4: Refactor t1 handler.
- https://gerrit.zephyrproject.org/r/11448 : net/dhcpv4: Use BROADCAST and UNICAST appropriately.
- https://gerrit.zephyrproject.org/r/11446 : net/dhcpv4: Call net_if_ipv4_addr_rm
- https://gerrit.zephyrproject.org/r/11437 : net/dhcpv4: Refactor handle_reply()
- https://gerrit.zephyrproject.org/r/11438 : net/dhcpv4: Implement NAK support.
- https://gerrit.zephyrproject.org/r/11444 : net/dhcpv4: Rework initialization.
- https://gerrit.zephyrproject.org/r/11734 : Bluetooth: SDP: Server: Introduce private define for max services
- https://gerrit.zephyrproject.org/r/11526 : doc: Fix broken references in new theme
- https://gerrit.zephyrproject.org/r/11723 : boards: add 96b_carbon board documentation
- https://gerrit.zephyrproject.org/r/11635 : olimexino_stm32: Enable DT usage for OLIMEXINO STM32
- https://gerrit.zephyrproject.org/r/11572 : arm: IRQ number correction in the soc configuration
- https://gerrit.zephyrproject.org/r/11726 : verify: re-enable phases verify


Daily Gerrit Digest

donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/11756 : nrf_rtc_timer: clear events and counter when disabling sys_clock
- https://gerrit.zephyrproject.org/r/11754 : samples: drivers: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11753 : samples: drivers: rtc: change hard-coded device nam
- https://gerrit.zephyrproject.org/r/11751 : doc: Add Atmel SMART SAM E70 Xplained board documentation
- https://gerrit.zephyrproject.org/r/11750 : kw41z: enable TRNG driver
- https://gerrit.zephyrproject.org/r/11749 : random: add MCUX TRNG driver
- https://gerrit.zephyrproject.org/r/11748 : random: mcux: rename random_mcux to random_mcux_rnga
- https://gerrit.zephyrproject.org/r/11743 : net: nbuf: Do not delete the fragments in net_nbuf_unref()
- https://gerrit.zephyrproject.org/r/11731 : Bluetooth: SDP: Server: Filter records based on requested uuids
- https://gerrit.zephyrproject.org/r/11732 : Bluetooth: SDP: Server: Send service search response
- https://gerrit.zephyrproject.org/r/11735 : net: shell: Show also ISR and main stack usage
- https://gerrit.zephyrproject.org/r/11682 : net: nbuf: Create net_nbuf_frag_del() for tracking allocations
- https://gerrit.zephyrproject.org/r/11681 : net: shell: Add cmd to see net_buf allocations
- https://gerrit.zephyrproject.org/r/11680 : net: nbuf: Track memory allocations
- https://gerrit.zephyrproject.org/r/11679 : net: nbuf: Remove unnecessary buf init
- https://gerrit.zephyrproject.org/r/11677 : net: nbuf: Remove obsolete reserve variable from net_nbuf
- https://gerrit.zephyrproject.org/r/11678 : net: if: Clarify the documentation in net_if_send_data()
- https://gerrit.zephyrproject.org/r/11734 : Bluetooth: SDP: Server: Introduce private define for max services
- https://gerrit.zephyrproject.org/r/11733 : tests: add zephyr flash reentrancy case
- https://gerrit.zephyrproject.org/r/11729 : doc: Add Atmel SMART SAM E70 Xplained board documentation
- https://gerrit.zephyrproject.org/r/11726 : verify: re-enable phases verify
- https://gerrit.zephyrproject.org/r/11724 : boards: add 96b_nitrogen board documentation
- https://gerrit.zephyrproject.org/r/11723 : boards: add 96b_carbon board documentation

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11326 : tests/mqtt: Fix compiler warnings in MQTT Packet test case
- https://gerrit.zephyrproject.org/r/11214 : tests: add zephyr pinmux driver api test case
- https://gerrit.zephyrproject.org/r/11450 : net/dhcpv4: Refactor t1 handler.
- https://gerrit.zephyrproject.org/r/9821 : shell: use modules' own help functions if have already defined
- https://gerrit.zephyrproject.org/r/11449 : net/dhcpv4: Fix the behaviour of ciaddr.
- https://gerrit.zephyrproject.org/r/11451 : net/dhcpv4: Support REBINDING
- https://gerrit.zephyrproject.org/r/11446 : net/dhcpv4: Call net_if_ipv4_addr_rm
- https://gerrit.zephyrproject.org/r/11447 : net/dhcpv4: Use server identifier appropriately.
- https://gerrit.zephyrproject.org/r/11444 : net/dhcpv4: Rework initialization.
- https://gerrit.zephyrproject.org/r/11445 : net/dhcpv4: Introduce start/stop API and disabled state.
- https://gerrit.zephyrproject.org/r/11438 : net/dhcpv4: Implement NAK support.
- https://gerrit.zephyrproject.org/r/11435 : net/dhcpv4: Unify dhcpv4 state name printers
- https://gerrit.zephyrproject.org/r/11437 : net/dhcpv4: Refactor handle_reply()
- https://gerrit.zephyrproject.org/r/11441 : net/dhcpv4: Refactor send_discover
- https://gerrit.zephyrproject.org/r/11436 : net/dhcpv4: Adjust state names to reflect rfc2131
- https://gerrit.zephyrproject.org/r/11440 : net/dhcpv4: Refactor send_request state handling.
- https://gerrit.zephyrproject.org/r/11432 : net/dhcpv4: Refactor packet construction
- https://gerrit.zephyrproject.org/r/11433 : net/dhcpv4: Refactor dhcpv4 message type representation.
- https://gerrit.zephyrproject.org/r/11439 : net/dhcpv4: Explicitly initialize net_if dhcpv4 state.
- https://gerrit.zephyrproject.org/r/11489 : RFC: DON'T MERGE net/dhcpv4: Respond to link up / down events
- https://gerrit.zephyrproject.org/r/11434 : net/dhcpv4: Move timers inside the net_if dhcpv4 context
- https://gerrit.zephyrproject.org/r/11443 : net/dhcpv4: Refactor REQUESTING state entry.
- https://gerrit.zephyrproject.org/r/11384 : arm: Support for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11442 : net/dhcpv4: Refactor SELECTING state entry.
- https://gerrit.zephyrproject.org/r/11430 : net/dhcpv4: Add missing const
- https://gerrit.zephyrproject.org/r/11526 : doc: Fix broken references in new theme
- https://gerrit.zephyrproject.org/r/9072 : boards: arm: add support for redbear ble nano 2
- https://gerrit.zephyrproject.org/r/11488 : net/dhcpv4: Remove !iface checks from timeout handlers.
- https://gerrit.zephyrproject.org/r/10881 : sensor/mma865x: Add driver for MMA865x 3 Axis Accelerometer Family
- https://gerrit.zephyrproject.org/r/10880 : bbc_microbit: Enable MAG3110
- https://gerrit.zephyrproject.org/r/11448 : net/dhcpv4: Use BROADCAST and UNICAST appropriately.
- https://gerrit.zephyrproject.org/r/10882 : bbc_microbit: Enable MMA8653
- https://gerrit.zephyrproject.org/r/11187 : tests: kernel: add test point k_cpu_atomic_idle
- https://gerrit.zephyrproject.org/r/11216 : tests: kernel: added clock_test
- https://gerrit.zephyrproject.org/r/11479 : samples: pwm: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11621 : tests: add AES cmac test to mbedtls test
- https://gerrit.zephyrproject.org/r/11342 : boards: arduino_due: Add make flash support
- https://gerrit.zephyrproject.org/r/11671 : Bluetooth: GATT: Add bt_gatt_get_mtu API
- https://gerrit.zephyrproject.org/r/4489 : Bluetooth: SDP: Server: Support ServiceAttributeRequest
- https://gerrit.zephyrproject.org/r/4488 : Bluetooth: SDP: Server: Handle Service Search request
- https://gerrit.zephyrproject.org/r/9447 : Bluetooth: SDP: Server: Support ServiceSearchAttributeRequest
- https://gerrit.zephyrproject.org/r/11242 : net: Add net_buf pool support to each context
- https://gerrit.zephyrproject.org/r/11575 : net: nbuf: Split one global DATA pool to RX and TX DATA pools
- https://gerrit.zephyrproject.org/r/11560 : net: buf: Store name of the buffer pool
- https://gerrit.zephyrproject.org/r/11561 : net: shell: Print network buffer pool information
- https://gerrit.zephyrproject.org/r/11618 : net: nbuf: Pass ll_reserve when creating TX buffer
- https://gerrit.zephyrproject.org/r/11298 : samples: net: Use context specific net_buf pools in echo_*
- https://gerrit.zephyrproject.org/r/11616 : net: Remove link layer reserve param from IP packet creator
- https://gerrit.zephyrproject.org/r/11345 : net: nbuf: Fix the net_nbuf_copy() buf parameter
- https://gerrit.zephyrproject.org/r/11548 : net: nbuf: Remove unnecessary debugging code
- https://gerrit.zephyrproject.org/r/11613 : net: shell: Fix the info prints for net_buf pools
- https://gerrit.zephyrproject.org/r/11614 : net: nbuf: Print pool name instead of address in debug prints
- https://gerrit.zephyrproject.org/r/11459 : net: nbuf: Fix net_nbuf_copy() so that original nbuf is not modified
- https://gerrit.zephyrproject.org/r/11464 : net: context: TCP packets must be send via net_tcp_send_data()
- https://gerrit.zephyrproject.org/r/11615 : net: nbuf: Use net_nbuf_get_frag() to allocate a fragment
- https://gerrit.zephyrproject.org/r/11346 : net: nbuf: Add helper function to copy buf user_data
- https://gerrit.zephyrproject.org/r/11547 : net: buf: Add more accounting info to net_buf pool
- https://gerrit.zephyrproject.org/r/11348 : net: tcp: Fix the issues with 6lo
- https://gerrit.zephyrproject.org/r/11465 : net: conn: Print UDP and TCP checksum after receiving pkt
- https://gerrit.zephyrproject.org/r/11347 : net: 6lo: Use dedicated buf pool if enabled
- https://gerrit.zephyrproject.org/r/11460 : net: 6lo: Change how net_buf is allocated in RX side
- https://gerrit.zephyrproject.org/r/11667 : samples: tickless: (DO NOT MERGE) Enables tickless kernel in some tests
- https://gerrit.zephyrproject.org/r/10851 : power: tickless: Add tickless kernel support
- https://gerrit.zephyrproject.org/r/10850 : power: tickless: Add TICKLESS_KERNEL kconfig option
- https://gerrit.zephyrproject.org/r/11330 : lib: Add minimal JSON library
- https://gerrit.zephyrproject.org/r/11383 : arm: HAL files for MKL25Z soc
- https://gerrit.zephyrproject.org/r/11207 : tests: add zephyr flash driver api test case
- https://gerrit.zephyrproject.org/r/10879 : sensor/mag3110: Add mag3110 three axis magnetometer driver.
- https://gerrit.zephyrproject.org/r/10645 : Bluetooth: HFP HF: Handling AG Network error
- https://gerrit.zephyrproject.org/r/10806 : Bluetooth: AVDTP: Handling Discover response
- https://gerrit.zephyrproject.org/r/11458 : Bluetooth: AVDTP: Add AVDTP GetCapabilities Function Definition
- https://gerrit.zephyrproject.org/r/11172 : soc: defconfig: Enable WDT for ATMEL SAM MCUs
- https://gerrit.zephyrproject.org/r/11608 : serial: stm32: Move to more traditional formatting
- https://gerrit.zephyrproject.org/r/11597 : dma: stm32f4x: Add dump regs function to aid debugging
- https://gerrit.zephyrproject.org/r/11607 : serial: stm32: Give H/W a chance to set the TXE bit on transfer
- https://gerrit.zephyrproject.org/r/11606 : dma: stm32f4x: By default increment pointer through data passed through memory
- https://gerrit.zephyrproject.org/r/11627 : WIP: Security guideline
- https://gerrit.zephyrproject.org/r/11669 : Bluetooth: HFP HF: Support to send hf AT command
- https://gerrit.zephyrproject.org/r/11331 : samples: net: NATS protocol sample
- https://gerrit.zephyrproject.org/r/11270 : Bluetooth: HFP HF: SCO: Enable sco conn complete in event_mask
- https://gerrit.zephyrproject.org/r/11269 : Bluetooth: HFP HF: SCO: Accept eSCO conn request
- https://gerrit.zephyrproject.org/r/11268 : Bluetooth: HFP HF: SCO: Add esco supported pkt type
- https://gerrit.zephyrproject.org/r/11577 : RFC: net/if: Introduce NET_IF_READY and net_if_link_status()
- https://gerrit.zephyrproject.org/r/11263 : tests: add zephyr SPI driver api test case
- https://gerrit.zephyrproject.org/r/11571 : quark_se: Fix bluetooth UART dependency
- https://gerrit.zephyrproject.org/r/11569 : eth/eth_mcux: Make promiscous mode configurable.

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/11755 : samples: i2c_fujitsu: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11752 : doc: allow table head and content to wrap
- https://gerrit.zephyrproject.org/r/11744 : Revert "boards: panther: Use 115200 baudrate for BLE UART"
- https://gerrit.zephyrproject.org/r/11747 : Revert "boards: panther: Use 115200 baudrate for BLE UART"
- https://gerrit.zephyrproject.org/r/11746 : flash: Fixes wrong SPI device for flash memory in arduino 101 sss
- https://gerrit.zephyrproject.org/r/11745 : doc: update link to 0.9 SDK
- https://gerrit.zephyrproject.org/r/11736 : Bluetooth: shell: Fix GATT long write support
- https://gerrit.zephyrproject.org/r/11737 : Bluetooth: GATT: Fix subscriptions removal
- https://gerrit.zephyrproject.org/r/11738 : Bluetooth: Controller: Fix LE Ping PDU dispatch
- https://gerrit.zephyrproject.org/r/11739 : Bluetooth: shell: Fix accessing invalid memory
- https://gerrit.zephyrproject.org/r/11740 : Bluetooth: SMP: Fix passkey entry for legacy pairing
- https://gerrit.zephyrproject.org/r/11741 : Bluetooth: shell: Don't echo LE CoC data
- https://gerrit.zephyrproject.org/r/11742 : Bluetooth: Fix connection object leak
- https://gerrit.zephyrproject.org/r/11676 : doc: fix more spelling errors throughout docs
- https://gerrit.zephyrproject.org/r/11691 : net: doc: Fix incorrect netcat note for qemu setup
- https://gerrit.zephyrproject.org/r/11692 : net: doc: Invalid config option for TCP
- https://gerrit.zephyrproject.org/r/11693 : samples: net: Fix the 802.15.4 monitor pcap saving
- https://gerrit.zephyrproject.org/r/11694 : samples/ieee802154: Update qemu based samples
- https://gerrit.zephyrproject.org/r/11695 : drivers/ieee802154: Add missing parameter to net_if_set_link_addr()
- https://gerrit.zephyrproject.org/r/11696 : net: icmpv6: Add TCP header when sending ICMPv6 error
- https://gerrit.zephyrproject.org/r/11697 : net: icmpv6: Echo-Reply seq and id fix
- https://gerrit.zephyrproject.org/r/11698 : net: ipv6: Add util to traverse neighbor cache entries
- https://gerrit.zephyrproject.org/r/11699 : net: shell: Print IPv6 neighbor information
- https://gerrit.zephyrproject.org/r/11700 : net: ipv6: Add util to remove neighbor from cache
- https://gerrit.zephyrproject.org/r/11701 : net: if: Remove local address from IPv6 neighbor cache
- https://gerrit.zephyrproject.org/r/11702 : samples/zoap_server: Remove useless return statements
- https://gerrit.zephyrproject.org/r/11703 : samples/zoap_server: Add more validation tests for block-wise
- https://gerrit.zephyrproject.org/r/11704 : samples/zoap_server: Add a test case for the observer feature
- https://gerrit.zephyrproject.org/r/11705 : samples/zoap_server: Adds example for the link-format feature
- https://gerrit.zephyrproject.org/r/11706 : tests/zoap: Adds test for the length of payload on the RX side
- https://gerrit.zephyrproject.org/r/11707 : iot/zoap: Fix requiring that the buffer is unchanged for retransmit
- https://gerrit.zephyrproject.org/r/11708 : samples/zoap_server: Add retransmissions for CON messages
- https://gerrit.zephyrproject.org/r/11709 : samples/zoap_client: Fix using the wrong timeout for retransmissions
- https://gerrit.zephyrproject.org/r/11710 : net: ipv6: Bluetooth address fix
- https://gerrit.zephyrproject.org/r/11711 : samples/net/mqtt: Simplify MQTT publisher
- https://gerrit.zephyrproject.org/r/11712 : samples/net/mqtt: Improve inline doc
- https://gerrit.zephyrproject.org/r/11713 : samples/net/mqtt: Move conf parameters to config.h
- https://gerrit.zephyrproject.org/r/11714 : samples/net/mqtt: Don't break lines after the "static" keyword
- https://gerrit.zephyrproject.org/r/11715 : net/nbuf: Fix spelling.
- https://gerrit.zephyrproject.org/r/11716 : net/if: Fix documentation comment marker.
- https://gerrit.zephyrproject.org/r/11717 : eth/eth_mcux: Provide phy state name printing in debug
- https://gerrit.zephyrproject.org/r/11718 : eth/eth_mcux: Provide start and stop operations on the PHY driver.
- https://gerrit.zephyrproject.org/r/11719 : net: ipv6: Do not try to unref null pointer
- https://gerrit.zephyrproject.org/r/11720 : net/buf.h: fix copy-paste Doxygen error
- https://gerrit.zephyrproject.org/r/11721 : net/l2/ieeee802154: Fix typo in ieee802154_reserve name
- https://gerrit.zephyrproject.org/r/11722 : net/dns: Improve unaligned memory access
- https://gerrit.zephyrproject.org/r/11684 : altera_avalon_timer: disable high-resolution timestamps
- https://gerrit.zephyrproject.org/r/11683 : riscv_machine_timer: fix k_cycle_get_32()
- https://gerrit.zephyrproject.org/r/11685 : kernel: add flexibility to k_cycle_get_32() definition
- https://gerrit.zephyrproject.org/r/11686 : arcv2_timer: fix cycle count race
- https://gerrit.zephyrproject.org/r/11687 : x86: loapic_timer: use TSC for k_cycle_get_32()
- https://gerrit.zephyrproject.org/r/11688 : tests: add timer monotonic test
- https://gerrit.zephyrproject.org/r/11689 : cortex_m_systick: fix _timer_cycle_get_32() race
- https://gerrit.zephyrproject.org/r/11730 : gpio: mcux: Revert to older GPIO device names as were used for Kinetis.
- https://gerrit.zephyrproject.org/r/11728 : sanitycheck: add _k_queue_area to recognised sections
- https://gerrit.zephyrproject.org/r/11675 : doc: fix spelling errors in doc/kernel documents
- https://gerrit.zephyrproject.org/r/11672 : kernel: use k_cycle_get_32 instead of sys_cycle_get_32
- https://gerrit.zephyrproject.org/r/11673 : doc: fix spelling errors in doc/kernel documents
- https://gerrit.zephyrproject.org/r/9890 : sys_bitfield*(): use 'void *' instead of memaddr_t
- https://gerrit.zephyrproject.org/r/11377 : doc: allow table head and content to wrap
- https://gerrit.zephyrproject.org/r/11573 : samples: i2c_fujitsu: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11582 : samples: drivers: change hard-coded device name
- https://gerrit.zephyrproject.org/r/11574 : samples: drivers: rtc: change hard-coded device nam
- https://gerrit.zephyrproject.org/r/11205 : tests: kernel: added test cases k_pipe_block_put
- https://gerrit.zephyrproject.org/r/11209 : tests: kernel: added testapp profiling_api
- https://gerrit.zephyrproject.org/r/11361 : flash: Fixes wrong SPI device for flash memory in arduino 101 sss
- https://gerrit.zephyrproject.org/r/11208 : doc: update link to 0.9 SDK
- https://gerrit.zephyrproject.org/r/11668 : gpio: mcux: Revert to older GPIO device names as were used for Kinetis.
- https://gerrit.zephyrproject.org/r/11584 : Bluetooth: AVDTP: Rename of variables
- https://gerrit.zephyrproject.org/r/11559 : Bluetooth: AVDTP: Fix discover param struct
- https://gerrit.zephyrproject.org/r/11629 : run_phases/sanity: support re-trying sanity checks
- https://gerrit.zephyrproject.org/r/11617 : Merge net branch into master
- https://gerrit.zephyrproject.org/r/11628 : filter-known-issues: fix missing variable printing
- https://gerrit.zephyrproject.org/r/11185 : tests: kernel: add test point k_delayed_work_remaining_get
- https://gerrit.zephyrproject.org/r/11177 : tests: kernel: added test case k_fifo_is_empty
- https://gerrit.zephyrproject.org/r/11174 : tests: kernel: added test case k_is_preempt_thread
- https://gerrit.zephyrproject.org/r/11467 : kernel: Add k_queue API
- https://gerrit.zephyrproject.org/r/11468 : tests: Add queue tests
- https://gerrit.zephyrproject.org/r/11469 : fifo: Make use of k_queue as implementation
- https://gerrit.zephyrproject.org/r/11470 : lifo: Make use of k_queue as implementation
- https://gerrit.zephyrproject.org/r/11476 : x86: fix operand modifiers in IRQ_CONNECT()
- https://gerrit.zephyrproject.org/r/9674 : drivers: gpio: Set the line to the pull by default
- https://gerrit.zephyrproject.org/r/11632 : drivers: serial: nrf5: Fix system off pin configuration
- https://gerrit.zephyrproject.org/r/11471 : Bluetooth: GATT: Use __ASSERT for invalid parameters


Re: Adding support for CC2650 SoC

Geoffrey LE GOURRIEREC <geoffrey.legourrierec@...>
 

I am currently doing a basic port in order to submit a patch as quickly as possible;
I just started testing the UART driver and am still  trying to debug it.
I had failed to notice that the CC2650 has an extra configuration area, and have used
the basic linker script already provided for most ARM Cortex builds.
So, thanks for pointing that out: my CCFG area is completely unusable. :)
 
Do you mean that you can see the uart output without configring the CCFG,
just using basic linker script? But from my former view, if no CCFG is configured, that is,
the image valid bit of CCFG is not set as 0, the SoC will go into the bootloader mode,
not the application programed to the flash.

You are correct. What I meant is that my UART test fails in part because, indeed, the
IMAGE_VALID field was not set to 0. I have now configured the CCFG in the init() function
of the SoC, in arch/arm/soc/ti_simplelink/cc2650.
 
I suggest we add a configuration option, like CONFIG_TI_CCFG_PRESENT,
that we'd use as a switch for extra code in the linker script.
I think it might a good idea.

Good, I'll start working on that then. Please tell me if you manage to patch the
linker script appropriately. :)

Regards,

--
Geoffrey Le Gourriérec

5481 - 5500 of 8046