Is this custom hardware? Are you implying that both interfaces work independently but not together?

#ble #nrf52840

Hi All, I have observed one thing related to zephyr's hci_uart sample application. I have used above application to implement the logic of beacon scanning in my custom application. (Used Bluez 5.50 fr

#ble #hci #nrf52480 #samples #uart

Hi, Iam using nrf52840 development board, developing software using zephyr. In software development iam using bluetooth as a peripheral and uart in interrupt mode(to get data from other module), when

#ble #nrf52840

Hi Vinayak, Thank you for the support. I have created the GH issue for the same https://github.com/zephyrproject-rtos/zephyr/issues/23319 Thanks, Mayank

#ble #hci #nrf52480 #uart

Hi Mayank, When you create the GitHub issue please be specific about the exact layout of the setup you have. It is not fully clear to me if you are connecting the nrf52840_pca10056 to the i.MX6UL via

#ble #hci #nrf52480 #uart

Ok, Please create a GH issue and mentioned as much details as possible to help me reproduce the issue. Vinayak

#ble #hci #nrf52480 #uart

Hi All, Here i'm facing the issue even after using the full UART (Tx, Rx, RTS, CTS). These 4 pins are connected & configured from both (i.MX6UL & nrf52840_pca10056). Note : nrf52840 chip is flashed wi

#ble #hci #nrf52480 #uart

Hi Jamie, All the disconnects are Host Bluetooth stack initiated. I will need some help from BlueZ guys to throw some light here. Regards, Vinayak

#ble #hci #nrf52480 #uart

Hi Vinayak > A btmon log would help identify the reason for disconnection. I have uploaded the 2 logs here: https://www.dropbox.com/s/d2yurf6nxee9wk0/btmon_logs.zip?dl=0 The Zephyr one has quite a lot

#ble #hci #nrf52480 #uart

Hi Jamie, A btmon log would help identify the reason for disconnection. > the connection parameter update still fails but even minutes later I am still connected to the remote device. This is weird, t

#ble #hci #nrf52480 #uart

Hi Vinayak I gave it a try this morning with the latest master build of zephyr using the HCI_USB on an nrf52840_pca10059 dongle and I don’t get the errors/timeout issues as I save previously when I te

#ble #hci #nrf52480 #uart

Hi, Both Mayank and Jamie, I am interested in the way the HCI packets are transported to the Host Bluetooth stack. In case of use of nRF DKs and Dongle, if using JLink debugger host firmware, you need

#ble #hci #nrf52480 #uart

Hi Carles, I was assuming it was aimed at both of us, I’m not sure about what hardware they’re using. I’ll give it a try tomorrow with the hardware I have and see if it’s working with the latest branc

#ble #hci #nrf52480 #uart

Hi Jamie, I think those questions were directed to Mayank, who is experiencing the issue now. Thanks, Carles

#ble #hci #nrf52480 #uart

Hi Vinayak, > Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? When I tested it, it was using an nRF52840 PCA10059-like board

#ble #hci #nrf52480 #uart

Hi Mayank, Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? For those using USB_UART conversion, I am assuming you are using

#ble #hci #nrf52480 #uart

So does anyone have idea regarding this issue ? I'm using zephyr (Version : 2.1.0) and Bluez (Version : 5.50). Thanks, Mayank

#ble #hci #nrf52480 #uart

Hi, I’ve previously done testing with the HCI UART and USB sample apps (in older Zephyr versions) with an nRF52840 and linux PC and always found it to not work well. It would start fine, could scan fo

#ble #hci #nrf52480 #uart

Hi All, I'm facing issues regarding ble's hci interface. I'm having nrf52840 module on which i run zephyr's hci_uart app for beacon scanning. I have Bluez 5.50 installed on my custom board (imx6ull).

#ble #hci #nrf52480 #uart

Hi Narendar, Please create a github bug report, with details on how to build your application and reproduce the issue. You may share a branch in the GH issue if that is faster for me or others to repr

#ble #nrf52840 #uart