Hello, I am trying to understand ticker timer. and have confusion between user id's, what is the difference between RADIO_TICKER_USER_ID_WORKER and RADIO_TICKER_USER_ID_APP? is there any material avai

#nrf52840 #ble #nrf52832

Hi there, I copied Vinayak who is the original author of the ticker. There is no real material available publicly at this point. Regards, Carles

#nrf52840 #ble #nrf52832

Hello All, I have one question regarding the ability of zephyr's hci_uart sample app. I am using this application on nrf52840_pca10056 for scanning the ble beacons. Scenario is i can see "hci0" interf

#uart #ninja #ble #hci #nrf52480

Hi Jamie, I think those questions were directed to Mayank, who is experiencing the issue now. Thanks, Carles

#ble #hci #nrf52480 #uart

Hi, Both Mayank and Jamie, I am interested in the way the HCI packets are transported to the Host Bluetooth stack. In case of use of nRF DKs and Dongle, if using JLink debugger host firmware, you need

#ble #hci #nrf52480 #uart

Hi Mayank, When you create the GitHub issue please be specific about the exact layout of the setup you have. It is not fully clear to me if you are connecting the nrf52840_pca10056 to the i.MX6UL via

#ble #hci #nrf52480 #uart

Hi Vinayak, Thank you for the support. I have created the GH issue for the same https://github.com/zephyrproject-rtos/zephyr/issues/23319 Thanks, Mayank

#ble #hci #nrf52480 #uart

Ok, Please create a GH issue and mentioned as much details as possible to help me reproduce the issue. Vinayak

#ble #hci #nrf52480 #uart

Hi Mayank, Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? For those using USB_UART conversion, I am assuming you are using

#ble #hci #nrf52480 #uart

Hi Vinayak > A btmon log would help identify the reason for disconnection. I have uploaded the 2 logs here: https://www.dropbox.com/s/d2yurf6nxee9wk0/btmon_logs.zip?dl=0 The Zephyr one has quite a lot

#ble #hci #nrf52480 #uart

Hi Vinayak, > Are you using any host debugger firmware to convert to USB? or using 3v TTL connections to your custom board from nRF52840? When I tested it, it was using an nRF52840 PCA10059-like board

#ble #hci #nrf52480 #uart

Hi Carles, I was assuming it was aimed at both of us, I’m not sure about what hardware they’re using. I’ll give it a try tomorrow with the hardware I have and see if it’s working with the latest branc

#ble #hci #nrf52480 #uart

Hi Vinayak I gave it a try this morning with the latest master build of zephyr using the HCI_USB on an nrf52840_pca10059 dongle and I don’t get the errors/timeout issues as I save previously when I te

#ble #hci #nrf52480 #uart

Hi All, I'm facing issues regarding ble's hci interface. I'm having nrf52840 module on which i run zephyr's hci_uart app for beacon scanning. I have Bluez 5.50 installed on my custom board (imx6ull).

#ble #hci #nrf52480 #uart

Hi All, Here i'm facing the issue even after using the full UART (Tx, Rx, RTS, CTS). These 4 pins are connected & configured from both (i.MX6UL & nrf52840_pca10056). Note : nrf52840 chip is flashed wi

#ble #hci #nrf52480 #uart

Hi, Iam using nrf52840 development board, developing software using zephyr. In software development iam using bluetooth as a peripheral and uart in interrupt mode(to get data from other module), when

#ble #nrf52840 #uart

Hi Rajat, This could be helpful https://devzone.nordicsemi.com/b/blog/posts/nrf-blinky-compatible-firmware-using-zephyr-blueto You've to make changes as per your Board design. regards, vikrant

#bluetoothmesh #nrf52832 #ble

Hi, http://blog.bluetooth.com/exploring-bluetooth-5-going-the-distance Is concept of, LE Codded PHY present in current Zephyr implementation to increase range between two #BluetoothMesh Nodes ? What i

#bluetoothmesh #ble

Hi Vikrant, Advertising on Coded PHY needs the implementation of Extended Advertising feature of BT V5.0. This feature has not been implementation, only a initial effort was attempted. That said, any

#bluetoothmesh #ble