Thanks Adam, I have disabled BT and Shell, Only UART is there. Now, when i run the command with debug mode --> mcumgr -ldebug --conntype=serial --connstring='dev=/dev/ttymxc0,baud=115200' echo hello I

#ble #bluetoothmesh #nrf52840 #uart

Hello, I am trying to configure Zephyr as a HCI UART host. My setup: nrf52840_pca10056 nordic dev kit running zephyr/samples/bluetooth/hci_uart. This seems pretty straight forward. stm32f746g_disco de

#uart #bluetoothmesh #hci

Hi All, I have been working on ipv6 over ble on zephyr RTOS to form mesh network.I have been successfully integrated "rpl_node"(which is in zephyr/samples/net/rpl_node) with ble(nrf52832), and it has

#bluetoothmesh #nrf52480 #nrf52832 #zephyrbluetoothmesh

Hi Robert, Can you please open a GitHub issue and assign it to @jhedberg ? Thanks, Carles

#ble #bluetoothmesh

I noticed that in these examples, there's only one main.c file, and only one image file would be built, it can support different hardware, but seems not different roles? Bluetooth Mesh is supposed to

#bluetoothmesh

Hello! A couple of months ago, I requested some help to enable the LPN and friend features in this post: https://lists.zephyrproject.org/g/devel/topic/18050411#2060 Which turned out successfully with

#bluetoothmesh

Hi, I'm trying to do an OTA of zephyr hci_uart application and i have done following things. Referred https://docs.zephyrproject.org/1.14.0/samples/subsys/mgmt/mcumgr/smp_svr/README.html?highlight=bui

#nrf52840 #ble #bluetoothmesh

Hi Billy, If I were to guess, you’re calling the configuration client APIs without waiting for the responses (passing NULL for the response parameters, like the status) and some previous call has cons

#bluetoothmesh #zephyrbluetoothmesh

Hello, I am working on a project using Mesh with nrf52 boards. I have 3 boards for now, two of them are in a mesh network (boards A and B) (I will have more later to hava a real mesh network), and the

#bluetoothmesh

Hi, How could I use periodic publishing in Mesh ? I have looked through the Mesh Spec (especially section 3.7.6.1), and I tried to understand in include files how to use it but I haven't understood wh

#bluetoothmesh

Hello, I have been trying to use the periodic publishing in mesh, but I don't really see how to use it correctly. I have read the Mesh Specification, and I already asked here for help on publishing, a

#bluetoothmesh #nrf52

Hello, I am trying to send my mesh message from my proxy (that receive the message from my network) to my PC. I've understood that to do so, I should be using Mesh Proxy Data Out to notify my PC (GATT

#bluetoothmesh

Hi All, I am looking at implementing a sensor network via BLE Mesh and am looking for any information on the implementation of the SENSOR MESH MODEL. Can anyone point me in the right direction? Many t

#bluetoothmesh #zephyrbluetoothmesh

Hello, I need help to understand what is the correct way to make a self provision. I have two boards(nrf52_pca10040) and them will be provisioned on the same network to make some tests. So far I was u

#bluetoothmesh #zephyrbluetoothmesh

Hey, I am trying to establish a bluetooth mesh using the Raspberry Pi 3 (bluez meshctl) as the provisioner and the nrf52 boards as the nodes. The nodes have to periodically send sensor data (LPN) to t

#bluetoothmesh #nrf52832

Hi, After merging https://github.com/zephyrproject-rtos/zephyr/pull/13135#issuecomment-462891136 this PR in local repo, we can do DFU OTA using Android #nRFConnect. But I've observe following things:

#bluetoothmesh

Hi All, I am looking at the BT Mesh Health Server, and Client, so that i can report faults between nodes and ultimately to the central control application. Unfortunately, i have run into a problem; Ho

#bluetoothmesh #zephyrbluetoothmesh

Hi Rodrigo, Can you access Models after following these steps ? Provisioning & Configuration of Models -> un-provisioning (using reset node option in #nRFMesh) -> re-provisioning & re-configuration of

#bluetoothmesh #nrf52840

Hello, on my nRF52 board I am planning to have a Bluetooth mesh node running and then eventually (e.g. on button press) create a connection to a smartphone (nRF52 in Central, smartphone in Peripheral

#bluetoothmesh #bluetooth

Hello, I'm trying to know the difference between two APIs, they are: * int bt_mesh_model_publish(struct bt_mesh_model *model) * int bt_mesh_model_send(struct bt_mesh_model *model, struct bt_mesh_msg_c

#bluetoothmesh