If the Windows long path doesn’t prove to be the issue, you might check your west.yml and make sure that the repo is listed in that manifest. The “ERROR: update failed for project trusted-firmware-m”

#gettingstartedguide

Hi Srikanth, I don’t know if this is causing your problem. But I see your Windows path is somewhat long at C:/Users/vimel/SRIKANTH/my_workspace/projects/Projects_2021/ZEPHYR/SOFTWARE/zephyrproject. I

#gettingstartedguide

Hi After initialisation of west by using west init zephyrproject command then i gave the west update command then it updated for sometime after that it is showing error update failed in command prompt

#gettingstartedguide

Hi, I don't know if this is the proper place to ask technical question about zephyr but I have tried stackoverflow and started github issue with no help. I am new to zephyr so I followed the getting s

#gettingstartedguide

Hi, I get it, thanks for your patience explain.

#gettingstartedguide

Hi, "hotkernel via Lists.Zephyrproject.Org" <hotkernel=163.com@...> writes: It doesn't matter how you get the source code; west will work too. The important thing is that you need

#gettingstartedguide

Hi Carles, Thank you for reminding me that the guiconfig was introduced after the release of Zephyr 1.14 at master. So if use the git clone to get the source code not by the west tool (git clone https

#gettingstartedguide

Hi there, I can’t explain it unless you are not on the current master. guiconfig was introduced after the release of Zephyr 1.14, so if you are on 1.14 you won’t be able to use it. Carles

#gettingstartedguide

Hi Carles, Here is my detail steps to reproduce this fail: OS version: Ubuntu 18.04.2 LTS 64 bits install zephyr development environment: 1. sudo apt-get update 2. sudo apt-get upgrade 3. sudo apt-get

#gettingstartedguide

Hi there, Can you please let us know what error you get? Also, can you give us more details including which Zephyr version (master, 1.14, etc), what Host OS (Linux, Windows, macOS) and which toolchain

#gettingstartedguide

Hi, after I building the example: samples/bluetooth/hci_uart, under the directory "build", I can run "ninja menuconfig" command successfully, but run "ninja guiconfig" failed. I have searched the zeph

#gettingstartedguide

Hi Bo, Glad to hear you got this working. The recommended mechanism to install Git in the Zephyr Getting Started guide is to use Chocolatey, which does update the PATH with the Git folder (unless some

#gettingstartedguide

Hi Carles, And thank you very much for the very quick answer. I have installed git version 2.20.1 on my Windows and for some reason git doesn't add the path of its binary folder to the PATH environmen

#gettingstartedguide

Hi Bo, I notice 2 issues with your screenshots: You are running `west init` in c:\. I certainly would not recommend that. My recommendation would be to initialize zephyr in your user folder (typically

#gettingstartedguide

Hi zephyr, I am not able to install the latest zephyr on Windows following the getting started guide. I have previously installed zephyr on Windows without any issues. But following the latest getting

#gettingstartedguide

Hi Carles, Manually adding your new code lines to my jlink.py works. Regards, Bo

#gettingstartedguide

Thanks. I’ve sent a PR to the west repo to fix this. If you could test it (simply get the file and overwrite your local jlink.py) and approve it it would be most helpful. https://github.com/zephyrproj

#gettingstartedguide

Hi Carles, Number 2 works fine. Thanks a lot. Regards, Bo

#gettingstartedguide

Right, I think I know what is going on, the default value in the constructor is not being used. I believe there are 2 ways to try and fix the issue until we submit a patch: Add a line board_runner_arg

#gettingstartedguide

Hi Carles, And thank you very much for your quick response. I have renamed 'JLinkExe' to 'JLink.exe' in line 20 of my local jlink.py. I also renamed 'JLinkGDBServer' to 'JLinkGDBServer.exe' in line 23

#gettingstartedguide