I'm starting to work with the modem SIM7000. To do this, I'm using a B-L475E-IOT01A with the DF Robots SIM7000 arduino expansion shield. Well, I'd like to exercise the AT commands before integrate it

ok, ok. I have to enable the regulator device driver. Now it is working. My overlay is as below: / { Si7021_pwr: Si7021-pwr-ctrl { compatible = "regulator-fixed"; regulator-name = "Si7021 enable pin";

Hi, I was performing tests with my board, and the label Si7021pwr didn't appear at the device list...

I found a solution: / { si7021_pwr: si7021-pwr-ctrl { compatible = "regulator-fixed"; regulator-name = "Si7021 enable pin"; enable-gpios = < &gpiod 9 0 >; label = "Si7021pwr"; }; si7021_pwr2: si7021-p

Hi Peter, thank you. I was performing some tests here and I have a question: if I want to enable two or more supply-regulators in device three, how to proceed? I tried this approach and it doesn't wor

Hi! I'm starting with ZephyrProject and I'm playing with the development kit slstk3401a. After implementing a very basic blinky app, I decided to use the si7021 sensor present at the board. I wrote an

Hi! This is my first message to the Zephyr forum. Well, I started to work with zephyr a few days ago. I followed the steps from the Getting Started Guide and I'd like to perform the debugging of the a

#debug #nrf52480