Core407V STM32F407VET6 Board Definition


Warren Gay <ve3wwg@...>
 

This is in reference to the MCU board https://www.waveshare.com/wiki/Core407V

I have been able to build & flash the project in zsrc.tar.gz (below) using the 
board BOARD olimex_stm32_e407. The LEDs flash as expected.

However, when I try to use my own board definition (BOARD core407v_stm32f407), 
it builds but does not execute correctly (no LED flashing). Perhaps someone
can point out something obviously wrong with my board definition.


Yannis Damigos
 

Hi Waren,

CONFIG_GPIO_STM32=n in your core407v_stm32f407_defconfig disables the STM32
gpio driver.

Yannis


On Fri, May 4, 2018 at 5:53 AM Warren Gay <ve3wwg@gmail.com> wrote:

This is in reference to the MCU board
https://www.waveshare.com/wiki/Core407V

I have been able to build & flash the project in zsrc.tar.gz (below)
using the
board BOARD olimex_stm32_e407. The LEDs flash as expected.
However, when I try to use my own board definition (BOARD
core407v_stm32f407),
it builds but does not execute correctly (no LED flashing). Perhaps
someone
can point out something obviously wrong with my board definition.
Thanks, Warren
https://drive.google.com/open?id=10MFd3qMrX5062BkAz-mm3KdWUtUbcsLJ
(core407.tar.gz board defn)

https://drive.google.com/open?id=1p0TX3f30R2Rf6qKyBbci1xjRpApzz7he
(zsrc.tar.gz has blinky)