NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/1595 : doc: show information about documentation current version
- https://gerrit.zephyrproject.org/r/1594 : Bluetooth: SMP: Make use of sys_timer API
- https://gerrit.zephyrproject.org/r/1593 : misc: Add timer API
- https://gerrit.zephyrproject.org/r/1581 : Task monitor: move to "no_sync" API to feed kernel event logger
- https://gerrit.zephyrproject.org/r/1583 : kernel event profiler: add dynamic enable/disable/configure
- https://gerrit.zephyrproject.org/r/1578 : Add interrupt stub label for profiler (interrupt event)
- https://gerrit.zephyrproject.org/r/1580 : Add support of event logger put/get without sync
- https://gerrit.zephyrproject.org/r/1577 : Set kernel event logger timestamps to HW cycles
- https://gerrit.zephyrproject.org/r/1579 : Add capability to output binary data over console UART
- https://gerrit.zephyrproject.org/r/1591 : Bluetooth: Always use RPA for connection if privacy is enabled
- https://gerrit.zephyrproject.org/r/1590 : Bluetooth: Remove double address comparison
- https://gerrit.zephyrproject.org/r/1589 : Bluetooth: Simplify creation of LE connection
- https://gerrit.zephyrproject.org/r/1588 : Bluetooth: Simplify setting advertising parameters
- https://gerrit.zephyrproject.org/r/1587 : Bluetooth: Simplify setting random address
- https://gerrit.zephyrproject.org/r/1575 : sensors: split lsm9ds0_gyro driver
- https://gerrit.zephyrproject.org/r/1573 : sensor: rename SENSOR_TYPE_* to SENSOR_VALUE_TYPE_*
- https://gerrit.zephyrproject.org/r/1574 : sensors: split bmc150_magn driver
- https://gerrit.zephyrproject.org/r/1582 : qemu: Add possibility to redirect serial port to pseudo TTY
- https://gerrit.zephyrproject.org/r/1584 : Added profiler application
- https://gerrit.zephyrproject.org/r/1570 : Bluetooth: tester: Add Kconfig for nimble stack
- https://gerrit.zephyrproject.org/r/1572 : device: As device names are constants, let's treat them like it
- https://gerrit.zephyrproject.org/r/1571 : gpio: atmel_sam3: Make distinction with configuration and runtime data
- https://gerrit.zephyrproject.org/r/1569 : i2c: add register access API
- https://gerrit.zephyrproject.org/r/1557 : doc: update installation to add PLY library to Python3
- https://gerrit.zephyrproject.org/r/1565 : newlib_2.2.%.bbappend: Upgrade ARC newlib
- https://gerrit.zephyrproject.org/r/1564 : gcc-4.8arc.inc: Upgrade gcc
- https://gerrit.zephyrproject.org/r/1563 : binutils-2.23arc.inc:Upgrade version
- https://gerrit.zephyrproject.org/r/1562 : libgcc_4.8arc.bb: Cleanup
- https://gerrit.zephyrproject.org/r/1561 : make_zephyr_sdk.sh: Fix script compatibility with "dash"
- https://gerrit.zephyrproject.org/r/1560 : binutils: Rename append file
- https://gerrit.zephyrproject.org/r/1559 : script: clone: use poky http clone

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1483 : qmsi: watchdog: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1341 : sensor: add driver for LSM9DS0 accel and magn
- https://gerrit.zephyrproject.org/r/1360 : sensor: fix init driver_api
- https://gerrit.zephyrproject.org/r/1278 : sensor: fix coding style (bmc150 and lsm9ds0)
- https://gerrit.zephyrproject.org/r/1340 : sensor: add the posibility to fetch one data type
- https://gerrit.zephyrproject.org/r/1251 : sensor: make runtime configurable attrs continuous
- https://gerrit.zephyrproject.org/r/1519 : doc: add step for windows build configuration
- https://gerrit.zephyrproject.org/r/1492 : qmsi: spi: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1550 : Bluetooth: L2CAP: Refactor l2cap_chan_del
- https://gerrit.zephyrproject.org/r/1491 : spi: use global init priority
- https://gerrit.zephyrproject.org/r/1523 : spi: revert changes to API
- https://gerrit.zephyrproject.org/r/1482 : qmsi: rtc: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1500 : qmsi: uart: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1496 : qmsi: gpio: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1537 : net: tcp: Disable client role
- https://gerrit.zephyrproject.org/r/1536 : net: Enable TCP support
- https://gerrit.zephyrproject.org/r/1535 : net: Initial TCP support
- https://gerrit.zephyrproject.org/r/1076 : expr_parser.py: simple expression language
- https://gerrit.zephyrproject.org/r/1077 : sanitycheck: allow for more expressive filtering in testcase.ini
- https://gerrit.zephyrproject.org/r/1078 : test_tickless: improve testcase.ini filter
- https://gerrit.zephyrproject.org/r/1488 : qmsi: i2c: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1098 : drivers: add qmsi files for Quark MCUs
- https://gerrit.zephyrproject.org/r/1522 : doc: add architecture porting guide
- https://gerrit.zephyrproject.org/r/1508 : microkernel: use _thread_essential_set()
- https://gerrit.zephyrproject.org/r/1544 : qmsi: pinmux: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1520 : ipm console: Implement flow control between sender and receiver
- https://gerrit.zephyrproject.org/r/1353 : samples: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1354 : cc2520: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1445 : gpio: Deprecate API 1.0 callback function
- https://gerrit.zephyrproject.org/r/914 : gpio: Improve the public API to handle multi callbacks
- https://gerrit.zephyrproject.org/r/1271 : sensors: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1516 : x86: make GDT setup optional
- https://gerrit.zephyrproject.org/r/1554 : Bluetooth: L2CAP: Make common l2cap_disconn_rsp
- https://gerrit.zephyrproject.org/r/1553 : Bluetooth: L2CAP: Send LE CoC traffic to dedicated handler
- https://gerrit.zephyrproject.org/r/1552 : Bluetooth: L2CAP: Make common l2cap_disconn_req

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1592 : quark_se_devboard: Enable PM for the board
- https://gerrit.zephyrproject.org/r/1586 : drivers/nble: Cleanup Nordic RPC code
- https://gerrit.zephyrproject.org/r/1585 : drivers/nble: Update RPC to 0422 revision
- https://gerrit.zephyrproject.org/r/1576 : Bluetooth: Refactor bt_init
- https://gerrit.zephyrproject.org/r/1568 : Bluetooth: tests: Add DEBUG_DRIVER to automated tests
- https://gerrit.zephyrproject.org/r/1567 : Bluetooth: drivers/h5: Remove redundant BT_DBG()
- https://gerrit.zephyrproject.org/r/1566 : Bluetooth: Fix typo tupe to type
- https://gerrit.zephyrproject.org/r/1558 : vagrant: new python-ply package for build images
- https://gerrit.zephyrproject.org/r/1450 : sensor: bmi160: move sample app to arc subdirectory
- https://gerrit.zephyrproject.org/r/1452 : sensor: bmi160: add x86 app for Arduino101
- https://gerrit.zephyrproject.org/r/1456 : sensor: bmi160: make some read/write functions global
- https://gerrit.zephyrproject.org/r/1457 : sensor: bmi160: add support for triggers
- https://gerrit.zephyrproject.org/r/1455 : sensor: bmi160: fix bmi160_reg_field_update function
- https://gerrit.zephyrproject.org/r/1458 : sensor: bmi160: add trigger tests to the application
- https://gerrit.zephyrproject.org/r/1515 : sensor: bmi160: switch to the new logging API
- https://gerrit.zephyrproject.org/r/1453 : sensor: bmi160: move the printing macro to the header
- https://gerrit.zephyrproject.org/r/1454 : sensor: bmi160: create two wrappers for bmi160_reg_val_to_range
- https://gerrit.zephyrproject.org/r/1451 : sensor: sensor.h: fix typo
- https://gerrit.zephyrproject.org/r/1201 : Bluetooth: tester: Add support for seqence gatt database
- https://gerrit.zephyrproject.org/r/1362 : doc/board: Add documentation file for olimexino_stm32
- https://gerrit.zephyrproject.org/r/1361 : boards/olimexino_stm32: add new board
- https://gerrit.zephyrproject.org/r/1363 : sanitycheck: Add olimexino_stm32 board to sanitycheck
- https://gerrit.zephyrproject.org/r/1530 : samples: ipm: reset kernel binary name to zephyr
- https://gerrit.zephyrproject.org/r/1546 : Bluetooth: Kconfig: Split debug selection into a choice
- https://gerrit.zephyrproject.org/r/1545 : Bluetooth: Add dedicated bt_send() function