NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/1597 : quark_se: quark_d2000: remove all defines that now come from qmsi
- https://gerrit.zephyrproject.org/r/1609 : qmsi: spi: fixed warning due to const paramter in API call
- https://gerrit.zephyrproject.org/r/1598 : quark_d2000: remove unused code
- https://gerrit.zephyrproject.org/r/1593 : nanokernel: Add callout API
- https://gerrit.zephyrproject.org/r/1594 : Bluetooth: SMP: Make use of sys_callout API
- https://gerrit.zephyrproject.org/r/1611 : sensor: make delayed work visible in menuconfig
- https://gerrit.zephyrproject.org/r/1596 : sensor: migrate all drivers to new SYS_LOG
- https://gerrit.zephyrproject.org/r/1610 : Bluetooth: Remove RX priority fiber
- https://gerrit.zephyrproject.org/r/1620 : quark_se_devboard: Configure default UART for UART_PIPE
- https://gerrit.zephyrproject.org/r/1615 : sensor: mcp9808: support multiple devices
- https://gerrit.zephyrproject.org/r/1612 : sensor: add device config helpers
- https://gerrit.zephyrproject.org/r/1614 : gpio: add device config helpers
- https://gerrit.zephyrproject.org/r/1607 : Bluetooth: Add custom "monitor" protocol logging over UART
- https://gerrit.zephyrproject.org/r/1606 : Bluetooth: L2CAP: Enable L2CAP public API for BREDR
- https://gerrit.zephyrproject.org/r/1616 : samples: mcp9808: support two devices
- https://gerrit.zephyrproject.org/r/1613 : i2c: add device config helpers
- https://gerrit.zephyrproject.org/r/1619 : quark_se_devboard: Set correct UART for tester
- https://gerrit.zephyrproject.org/r/1618 : Bluetooth: Add name member to HCI driver struct
- https://gerrit.zephyrproject.org/r/1617 : Bluetooth: Move HCI device bus information to the driver
- https://gerrit.zephyrproject.org/r/1608 : Bluetooth: tests: Add automated tests for new monitor code
- https://gerrit.zephyrproject.org/r/1601 : doc: power_mgmt: Added Power Management documentation

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1580 : Add support of event logger put/get without sync
- https://gerrit.zephyrproject.org/r/1500 : qmsi: uart: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1506 : qmsi: flash: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1521 : qmsi: use QMSI_LIBRARY instead of QMSI_DRIVERS
- https://gerrit.zephyrproject.org/r/1544 : qmsi: pinmux: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1492 : qmsi: spi: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1278 : sensor: refactor bmc150 and lsm9ds0
- https://gerrit.zephyrproject.org/r/1340 : sensor: add the posibility to fetch one data type
- https://gerrit.zephyrproject.org/r/1251 : sensor: make runtime configurable attrs continuous
- https://gerrit.zephyrproject.org/r/1341 : sensor: add driver for LSM9DS0 accel and magn
- https://gerrit.zephyrproject.org/r/914 : gpio: Improve the public API to handle multi callbacks
- https://gerrit.zephyrproject.org/r/1581 : Task monitor: move to "no_sync" API to feed kernel event logger
- https://gerrit.zephyrproject.org/r/1574 : sensor: split bmc150_magn driver
- https://gerrit.zephyrproject.org/r/1550 : Bluetooth: L2CAP: Refactor l2cap_chan_del
- https://gerrit.zephyrproject.org/r/1535 : net: Initial TCP support
- https://gerrit.zephyrproject.org/r/1482 : qmsi: rtc: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1556 : Bluetooth: L2CAP: Add BREDR PSM server API interface
- https://gerrit.zephyrproject.org/r/1483 : qmsi: watchdog: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1553 : Bluetooth: L2CAP: Validate conn type in l2cap_chan_recv
- https://gerrit.zephyrproject.org/r/1494 : aio: rename sample name and make it generic
- https://gerrit.zephyrproject.org/r/1569 : i2c: add register access API
- https://gerrit.zephyrproject.org/r/1554 : Bluetooth: L2CAP: Make common l2cap_disconn_rsp
- https://gerrit.zephyrproject.org/r/1577 : Set kernel event logger timestamps to HW cycles
- https://gerrit.zephyrproject.org/r/1497 : samples: power: use string for driver name
- https://gerrit.zephyrproject.org/r/1496 : qmsi: gpio: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1499 : qmsi: adc: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1579 : Add capability to output binary data over console UART
- https://gerrit.zephyrproject.org/r/1489 : pwm: unify driver names
- https://gerrit.zephyrproject.org/r/1583 : kernel event profiler: add dynamic enable/disable/configure
- https://gerrit.zephyrproject.org/r/1548 : Bluetooth: L2CAP: Join together LE CoC static functions
- https://gerrit.zephyrproject.org/r/1498 : nble: Use string name for GPIO driver
- https://gerrit.zephyrproject.org/r/1584 : Added profiler application and scripts
- https://gerrit.zephyrproject.org/r/1493 : qmsi: aio: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1488 : qmsi: i2c: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1490 : qmsi: pwm: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1491 : spi: use global init priority
- https://gerrit.zephyrproject.org/r/1093 : doc: index config variable only once
- https://gerrit.zephyrproject.org/r/1578 : Add interrupt stub label for profiler (interrupt event)
- https://gerrit.zephyrproject.org/r/1098 : drivers: add qmsi files for Quark MCUs
- https://gerrit.zephyrproject.org/r/1495 : qmsi: aon_counters: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1552 : Bluetooth: L2CAP: Make common l2cap_disconn_req
- https://gerrit.zephyrproject.org/r/1555 : Bluetooth: L2CAP: Rename LE PSM server list variable
- https://gerrit.zephyrproject.org/r/1360 : sensor: fix init driver_api
- https://gerrit.zephyrproject.org/r/1573 : sensor: rename SENSOR_TYPE_* to SENSOR_VALUE_TYPE_*
- https://gerrit.zephyrproject.org/r/1575 : sensor: split lsm9ds0_gyro driver
- https://gerrit.zephyrproject.org/r/1519 : doc: add step for windows build configuration
- https://gerrit.zephyrproject.org/r/1537 : net: tcp: Disable client role
- https://gerrit.zephyrproject.org/r/1543 : net: apps: Set IPv4 configuration when doing automatic testing
- https://gerrit.zephyrproject.org/r/1542 : net: apps: Fix IPv4 support in echo-server
- https://gerrit.zephyrproject.org/r/1541 : net: apps: Add TCP support to echo-server application
- https://gerrit.zephyrproject.org/r/1540 : net: ipv4: Print configured IPv4 address to console
- https://gerrit.zephyrproject.org/r/1539 : net: Wakeup TX fiber when packet needs to be sent
- https://gerrit.zephyrproject.org/r/1538 : net: 802.15.4: Do not compress TCP packets
- https://gerrit.zephyrproject.org/r/1536 : net: Enable TCP support
- https://gerrit.zephyrproject.org/r/1325 : power_mgmt: Provide APIs for devices to signal busy to PM policy mgr
- https://gerrit.zephyrproject.org/r/1077 : sanitycheck: allow for more expressive filtering in testcase.ini
- https://gerrit.zephyrproject.org/r/1076 : expr_parser.py: simple expression language
- https://gerrit.zephyrproject.org/r/1078 : test_tickless: improve testcase.ini filter
- https://gerrit.zephyrproject.org/r/1557 : doc: update installation to add PLY library to Python3
- https://gerrit.zephyrproject.org/r/1326 : power_mgmt: Sample usage of device_xxx__busy() APIs
- https://gerrit.zephyrproject.org/r/1522 : doc: add architecture porting guide
- https://gerrit.zephyrproject.org/r/1508 : microkernel: use _thread_essential_set()
- https://gerrit.zephyrproject.org/r/1514 : nanokernel: tighten _is_thread_essential()
- https://gerrit.zephyrproject.org/r/1564 : gcc-4.8arc.inc: Upgrade gcc
- https://gerrit.zephyrproject.org/r/1562 : libgcc_4.8arc.bb: Cleanup
- https://gerrit.zephyrproject.org/r/1518 : build: fixes issue in windows Kconfig support
- https://gerrit.zephyrproject.org/r/1565 : newlib_2.2.%.bbappend: Upgrade ARC newlib
- https://gerrit.zephyrproject.org/r/1563 : binutils-2.23arc.inc:Upgrade version
- https://gerrit.zephyrproject.org/r/1561 : make_zephyr_sdk.sh: Fix script compatibility with "dash"
- https://gerrit.zephyrproject.org/r/1560 : binutils: Rename append file

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1599 : i2c/quark_se_ss: make structs and functions const and static
- https://gerrit.zephyrproject.org/r/1604 : Bluetooth: shell: Add support for advertising with RPA
- https://gerrit.zephyrproject.org/r/1602 : quark_se_devboard: Add configuration for nimble HCI stack
- https://gerrit.zephyrproject.org/r/1603 : Bluetooth: Fail if advertise with unsupported address type
- https://gerrit.zephyrproject.org/r/1595 : doc: show information about documentation current version
- https://gerrit.zephyrproject.org/r/1605 : arduino_101: Correct UART name configuration
- https://gerrit.zephyrproject.org/r/1600 : script: doc: new DOC_TAG option in root makefile
- https://gerrit.zephyrproject.org/r/1391 : debug: interrupt event logger support for arc
- https://gerrit.zephyrproject.org/r/1590 : Bluetooth: Remove double address comparison
- https://gerrit.zephyrproject.org/r/1588 : Bluetooth: Simplify setting advertising parameters
- https://gerrit.zephyrproject.org/r/1589 : Bluetooth: Simplify creation of LE connection
- https://gerrit.zephyrproject.org/r/1392 : debug: interrupt event logger sample for arc
- https://gerrit.zephyrproject.org/r/1591 : Bluetooth: Always use RPA for connection if privacy is enabled
- https://gerrit.zephyrproject.org/r/1587 : Bluetooth: Simplify setting random address
- https://gerrit.zephyrproject.org/r/1586 : drivers/nble: Cleanup Nordic RPC code
- https://gerrit.zephyrproject.org/r/1592 : quark_se_devboard: Enable PM for the board
- https://gerrit.zephyrproject.org/r/1585 : drivers/nble: Update RPC to 0422 revision
- https://gerrit.zephyrproject.org/r/1451 : sensor: sensor.h: fix typo
- https://gerrit.zephyrproject.org/r/1450 : sensor: bmi160: move sample app to arc subdirectory
- https://gerrit.zephyrproject.org/r/1452 : sensor: bmi160: add x86 app for Arduino101
- https://gerrit.zephyrproject.org/r/1456 : sensor: bmi160: make some read/write functions global
- https://gerrit.zephyrproject.org/r/1457 : sensor: bmi160: add support for triggers
- https://gerrit.zephyrproject.org/r/1455 : sensor: bmi160: fix bmi160_reg_field_update function
- https://gerrit.zephyrproject.org/r/1458 : sensor: bmi160: add trigger tests to the application
- https://gerrit.zephyrproject.org/r/1515 : sensor: bmi160: switch to the new logging API
- https://gerrit.zephyrproject.org/r/1453 : sensor: bmi160: move the printing macro to the header
- https://gerrit.zephyrproject.org/r/1454 : sensor: bmi160: create two wrappers for bmi160_reg_val_to_range