Topics

Suggestions on rpl_border_router and rpl_node #zephyrbluetoothmesh #bluetoothmesh #nrf52832 #nrf52480


Akash Naidu <akashnaiduece@...>
 


Hi All,

I have been working on ipv6 over ble on zephyr RTOS to form mesh network.I have been successfully integrated "rpl_node"(which is in zephyr/samples/net/rpl_node) with ble(nrf52832), and it has been able to connected and able to getting the response(if i ping).

Now, i am in quite confusion for how to use "rpl_border_router"(which is in zephyr/samples/net/rpl_border_router).

which board is suitable to configure it as a rpl_border_router?.

I have 5 nrf52 modules which will acts as "rpl_nodes", but how to connect these boards to "rpl_border_router" to form DAG network?

could you please suggest me that how to form DAG Network by using "rpl_border_router" and "rpl_node" on Zephyr RTOS?

I am totally new to network concepts, if possible please provide some useful documents where i can form the DAG network by using RPL protocol.

 

Advance in thanks.

 

BR

Akash. 


Serafin
 

Hi


There is a platform_whitelist in the sample.yaml file. In your case:

"platform_whitelist: frdm_k64f "


So you need this nxp board or have to port the sample to another board.


Greetings

Serafin


On 07/12/2018 11:14, Akash Naidu wrote:

Hi All,

I have been working on ipv6 over ble on zephyr RTOS to form mesh network.I have been successfully integrated "rpl_node"(which is in zephyr/samples/net/rpl_node) with ble(nrf52832), and it has been able to connected and able to getting the response(if i ping).

Now, i am in quite confusion for how to use "rpl_border_router"(which is in zephyr/samples/net/rpl_border_router).

which board is suitable to configure it as a rpl_border_router?.

I have 5 nrf52 modules which will acts as "rpl_nodes", but how to connect these boards to "rpl_border_router" to form DAG network?

could you please suggest me that how to form DAG Network by using "rpl_border_router" and "rpl_node" on Zephyr RTOS?

I am totally new to network concepts, if possible please provide some useful documents where i can form the DAG network by using RPL protocol.

 

Advance in thanks.

 

BR

Akash. 


Ravi kumar Veeramally
 

Hi Akash,

Look the at the hardware information and setup procedure in

"samples/net/rpl_border_router/README.rst".

- Ravi

On 12/7/18 12:14 PM, Akash Naidu wrote:

Hi All,

I have been working on ipv6 over ble on zephyr RTOS to form mesh network.I have been successfully integrated "rpl_node"(which is in zephyr/samples/net/rpl_node) with ble(nrf52832), and it has been able to connected and able to getting the response(if i ping).

Now, i am in quite confusion for how to use "rpl_border_router"(which is in zephyr/samples/net/rpl_border_router).

which board is suitable to configure it as a rpl_border_router?.

I have 5 nrf52 modules which will acts as "rpl_nodes", but how to connect these boards to "rpl_border_router" to form DAG network?

could you please suggest me that how to form DAG Network by using "rpl_border_router" and "rpl_node" on Zephyr RTOS?

I am totally new to network concepts, if possible please provide some useful documents where i can form the DAG network by using RPL protocol.

 

Advance in thanks.

 

BR

Akash.