Topics

Get RSSI in DTM(Zephyr)


Isaac Chen (陳尚航) <Isaac_Chen@...>
 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

1.      As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

2.      If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

3.      Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy


lairdjm
 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

  1. As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?
  2. If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

  1. Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy

 


Chettimada, Vinayak Kariappa
 

Hi Chen,

 

  1. As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

[vich] Yes, this is possible, but the command will have to be proprietary as per your test requirements.

 

  1. If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

[vich] RSSI can be easily measured in nRF5x series chips during Radio Rx mode. Implementation will have to be as per your requirement, as standard DTM mode does not define any interface for RSSI in DTM mode.

 

  1. Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

[vich] Other customers may be doing so, but I am not aware of unless the implementation is submitted upstream via a PR.

 

 

Regards,

Vinayak

 

From: Isaac Chen (陳尚航) <Isaac_Chen@...>
Sent: 14 January 2019 04:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

  1. As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

[vich] Yes, this is possible, but the command will have to be proprietary as per your test requirements.

  1. If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

[vich] RSSI can be easily measured in nRF5x series chips during Radio Rx mode. Implementation will have to be as per your requirement, as standard DTM mode does not define any interface for RSSI in DTM mode.

  1. Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

[vich] Other customers may be doing so, but I am not aware of unless the implementation is submitted upstream via a PR.

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy


Tommy Lin (林志聰) <Tommy.Lin@...>
 

Hi Vinayak,

I find a sample code in tests/Bluetooth/shell , and it can seem to test BT DTM.

It will produce an error message about SRAM overflow (log is in attachment) , when I compile it.

 

 

Could you give us some suggestions.

 

Best regards,

Tommy

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Monday, January 14, 2019 3:45 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: Get RSSI in DTM(Zephyr)

 

Hi Chen,

 

1.     As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

[vich] Yes, this is possible, but the command will have to be proprietary as per your test requirements.

 

2.     If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

[vich] RSSI can be easily measured in nRF5x series chips during Radio Rx mode. Implementation will have to be as per your requirement, as standard DTM mode does not define any interface for RSSI in DTM mode.

 

3.     Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

[vich] Other customers may be doing so, but I am not aware of unless the implementation is submitted upstream via a PR.

 

 

Regards,

Vinayak

 

From: Isaac Chen (陳尚航) <Isaac_Chen@...>
Sent: 14 January 2019 04:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

1.     As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

[vich] Yes, this is possible, but the command will have to be proprietary as per your test requirements.

2.     If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

[vich] RSSI can be easily measured in nRF5x series chips during Radio Rx mode. Implementation will have to be as per your requirement, as standard DTM mode does not define any interface for RSSI in DTM mode.

3.     Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

[vich] Other customers may be doing so, but I am not aware of unless the implementation is submitted upstream via a PR.

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy


Tommy Lin (林志聰) <Tommy.Lin@...>
 

Hi Jamie,

Sorry to bother you.

I use hci command LE Receiver Test Command and LE Test End Command let DUT enter Test mode and can get packets from equipment successfully.

Equipment send 1500 Bytes with RSSI(70 dbm) to DUT

 

At the same time , I try to launch “btmon” tool to get RSSI information , but I can’t get any RSSI.

 

 

Are there any methods can get RSSI in DTM?

 

Thanks

Tommy

From: Jamie Mccrae [mailto:Jamie.Mccrae@...]
Sent: Monday, January 14, 2019 3:39 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

1.     As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

2.     If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

3.     Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy

 


Ryan Erickson
 

Hello Tommy,

 

Per the Bluetooth Spec, there are no DTM commands to obtain RSSI.  You would need to add your own custom command in firmware.

 

Regards,

 

Ryan Erickson | Software Development Engineer III

Laird Connectivity

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: Monday, February 18, 2019 05:54
To: Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

EXTERNAL EMAIL: This email originated outside of Laird. Be careful with attachments and links.

Hi Jamie,

Sorry to bother you.

I use hci command LE Receiver Test Command and LE Test End Command let DUT enter Test mode and can get packets from equipment successfully.

Equipment send 1500 Bytes with RSSI(70 dbm) to DUT

 

At the same time , I try to launch “btmon” tool to get RSSI information , but I can’t get any RSSI.

 

 

Are there any methods can get RSSI in DTM?

 

Thanks

Tommy

From: Jamie Mccrae [mailto:Jamie.Mccrae@...]
Sent: Monday, January 14, 2019 3:39 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

  1. As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?
  2. If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

  1. Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy

 


Tommy Lin (林志聰) <Tommy.Lin@...>
 

Hi Ryan,

Thanks for your response.

 

Could you share if there are any reference code for DTM RSSI.

 

Thank You,

Tommy

From: Ryan Erickson [mailto:Ryan.Erickson@...]
Sent: Tuesday, February 19, 2019 4:20 AM
To: Tommy Lin (
林志聰) <Tommy.Lin@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hello Tommy,

 

Per the Bluetooth Spec, there are no DTM commands to obtain RSSI.  You would need to add your own custom command in firmware.

 

Regards,

 

Ryan Erickson | Software Development Engineer III

Laird Connectivity

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: Monday, February 18, 2019 05:54
To: Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

EXTERNAL EMAIL: This email originated outside of Laird. Be careful with attachments and links.

Hi Jamie,

Sorry to bother you.

I use hci command LE Receiver Test Command and LE Test End Command let DUT enter Test mode and can get packets from equipment successfully.

Equipment send 1500 Bytes with RSSI(70 dbm) to DUT

 

At the same time , I try to launch “btmon” tool to get RSSI information , but I can’t get any RSSI.

 

 

Are there any methods can get RSSI in DTM?

 

Thanks

Tommy

From: Jamie Mccrae [mailto:Jamie.Mccrae@...]
Sent: Monday, January 14, 2019 3:39 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

1.     As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

2.     If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

3.     Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy

 


Tommy Lin (林志聰) <Tommy.Lin@...>
 

Hi Ryan Erickson,

We would greatly appreciate it if you kindly give me some suggestions on the case.

For example , What documents we can reference? Where can we find some relevant code?

 

Thanks

Tommy

From: Tommy Lin (林志聰)
Sent: Tuesday, February 19, 2019 10:12 AM
To: 'Ryan Erickson' <Ryan.Erickson@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Ryan,

Thanks for your response.

 

Could you share if there are any reference code for DTM RSSI.

 

Thank You,

Tommy

From: Ryan Erickson [mailto:Ryan.Erickson@...]
Sent: Tuesday, February 19, 2019 4:20 AM
To: Tommy Lin (
林志聰) <Tommy.Lin@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hello Tommy,

 

Per the Bluetooth Spec, there are no DTM commands to obtain RSSI.  You would need to add your own custom command in firmware.

 

Regards,

 

Ryan Erickson | Software Development Engineer III

Laird Connectivity

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: Monday, February 18, 2019 05:54
To: Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

EXTERNAL EMAIL: This email originated outside of Laird. Be careful with attachments and links.

Hi Jamie,

Sorry to bother you.

I use hci command LE Receiver Test Command and LE Test End Command let DUT enter Test mode and can get packets from equipment successfully.

Equipment send 1500 Bytes with RSSI(70 dbm) to DUT

 

At the same time , I try to launch “btmon” tool to get RSSI information , but I can’t get any RSSI.

 

 

Are there any methods can get RSSI in DTM?

 

Thanks

Tommy

From: Jamie Mccrae [mailto:Jamie.Mccrae@...]
Sent: Monday, January 14, 2019 3:39 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

1.     As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?

2.     If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

3.     Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy

 


Ryan Erickson
 

Hello Tommy,

 

You can look at the Bluetooth specification to learn more about DTM mode.  I do not have any code or documents to share.   You will have to dig into the zephyr source code to see how you can implement your own DTM command to give you RSSI.

 

Ryan Erickson | Software Development Engineer III

Laird Connectivity

 

From: Tommy Lin (林志聰) <Tommy.Lin@...>
Sent: Wednesday, February 20, 2019 19:17
To: Ryan Erickson <Ryan.Erickson@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

EXTERNAL EMAIL: This email originated outside of Laird. Be careful with attachments and links.

Hi Ryan Erickson,

We would greatly appreciate it if you kindly give me some suggestions on the case.

For example , What documents we can reference? Where can we find some relevant code?

 

Thanks

Tommy

From: Tommy Lin (林志聰)
Sent: Tuesday, February 19, 2019 10:12 AM
To: 'Ryan Erickson' <Ryan.Erickson@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Ryan,

Thanks for your response.

 

Could you share if there are any reference code for DTM RSSI.

 

Thank You,

Tommy

From: Ryan Erickson [mailto:Ryan.Erickson@...]
Sent: Tuesday, February 19, 2019 4:20 AM
To: Tommy Lin (
林志聰) <Tommy.Lin@...>; Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hello Tommy,

 

Per the Bluetooth Spec, there are no DTM commands to obtain RSSI.  You would need to add your own custom command in firmware.

 

Regards,

 

Ryan Erickson | Software Development Engineer III

Laird Connectivity

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: Monday, February 18, 2019 05:54
To: Jamie Mccrae <Jamie.Mccrae@...>; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

EXTERNAL EMAIL: This email originated outside of Laird. Be careful with attachments and links.

Hi Jamie,

Sorry to bother you.

I use hci command LE Receiver Test Command and LE Test End Command let DUT enter Test mode and can get packets from equipment successfully.

Equipment send 1500 Bytes with RSSI(70 dbm) to DUT

 

At the same time , I try to launch “btmon” tool to get RSSI information , but I can’t get any RSSI.

 

 

Are there any methods can get RSSI in DTM?

 

Thanks

Tommy

From: Jamie Mccrae [mailto:Jamie.Mccrae@...]
Sent: Monday, January 14, 2019 3:39 PM
To: Isaac Chen (
陳尚航) <Isaac_Chen@...>; Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: RE: [Zephyr-devel] Get RSSI in DTM(Zephyr)

 

Hi Isaac,

Generally you would be measuring the RSSI on the test equipment from a signal generated by your Bluetooth radio, and would be using a calibrated accurate test system. The nRF51824 (from the product spec) has an RSSI accuracy of +/-6dB, that is wildly inaccurate and I cannot see any reason to want to measure/record it on every module. You can add a non-standard command to read and return the RSSI if needed to the DTM code.

Thanks,

Jamie

 

From: devel@... [mailto:devel@...] On Behalf Of Isaac Chen (???)
Sent: 14 January 2019 03:08
To: Chettimada, Vinayak Kariappa <vinayak.kariappa.chettimada@...>; Tommy Lin (
林志聰) <Tommy.Lin@...>; zephyr-devel@...
Cc: Hanyu.Hsu@...; Rung-Sheng Lee (
李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: Re: [Zephyr-devel] Get RSSI in DTM(Zephyr)
Importance: High

 

Hi Vinayak,

 

Our customer requested us to test conductive BLE RSSI in factory for accuracy improvement.

Could you please clarify the following questions?

  1. As I know, BLE RSSI can’t be measured in standard DTM mode. Is it possible to add new feature in DTM to support BLE RSSI measurement?
  2. If the answer to the above question is “no”, I still need your confirmation if other test modes exist that can measure RSSI except DTM mode.

In our experiences of other algorithm(LTE/WCDMA…etc.), RSSI usually can be detected easily in test mode via a CW tone. So it’s why we want

to double check this.

  1. Do you have any customers who have experiences to measure conductive RSSI in factory or in lab? If so, can you share the methodology?

 

 

Best Regards

 

Isaac Chen

Quanta Computer Inc.

Business Unit 11 BL1

Tel  : +886-3-327-2345 Ext : 17585

 

This transmission is intended only for the use of the addressed recipient and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any use of this communication is strictly prohibited. If you have received this communication in error, please kindly notify the sender and delete this message immediately. 

 

From: Chettimada, Vinayak Kariappa [mailto:vinayak.kariappa.chettimada@...]
Sent: Wednesday, January 09, 2019 8:00 PM
To: Tommy Lin (
林志聰); zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航); Rung-Sheng Lee (李榮盛); Brent Tsai (蔡旻其); Ryan Hsu (徐振鋒)
Subject: RE: Get RSSI in DTM

 

Hi Tommy,

 

I don’t remember if DTM mode has any RSSI command in the Specification.

 

Could you please elaborate on your requirements?

 

Regards,

Vinayak

 

From: devel@... <devel@...> On Behalf Of Tommy Lin (???)
Sent: 08 January 2019 13:25
To: zephyr-devel@...
Cc: Hanyu.Hsu@...; Isaac Chen (
陳尚航) <Isaac_Chen@...>; Rung-Sheng Lee (李榮盛) <Rung.Sheng.Lee@...>; Brent Tsai (蔡旻其) <Brent.Tsai@...>; Ryan Hsu (徐振鋒) <Ryan.Hsu@...>
Subject: [Zephyr-devel] Get RSSI in DTM

 

Hi ,

We have a product using nRF51824 with zephyr.

We use hci_uart sample code and follow below link , and we can get other BT device’s RSSI.

https://devzone.nordicsemi.com/b/blog/posts/nrf5x-support-within-the-zephyr-project-rtos

 

We have a question , If it is in DTM(Direct Test Mode) , how can we get RSSI?

Could you give us some suggestions.

 

Best regards,

Tommy