Topics

Daily Gerrit Digest


donotreply@...
 

NEW within last 24 hours:
- https://gerrit.zephyrproject.org/r/1629 : grove: use default i2c device set in Kconfig
- https://gerrit.zephyrproject.org/r/1628 : i2c: use I2C_X nameing instead of I2CX
- https://gerrit.zephyrproject.org/r/1627 : aio: build only when driver is configured in
- https://gerrit.zephyrproject.org/r/1626 : toolchain: move iamcu output format/arch to SoC
- https://gerrit.zephyrproject.org/r/1623 : device: simplify synchronization

UPDATED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1376 : kernel: Init back pointer to microkernel task
- https://gerrit.zephyrproject.org/r/1611 : sensor: make delayed work visible in menuconfig
- https://gerrit.zephyrproject.org/r/1616 : samples: mcp9808: support two devices
- https://gerrit.zephyrproject.org/r/1613 : i2c: add device config helpers
- https://gerrit.zephyrproject.org/r/1601 : doc: power_mgmt: Added Power Management documentation
- https://gerrit.zephyrproject.org/r/1278 : sensor: refactor bmc150 and lsm9ds0
- https://gerrit.zephyrproject.org/r/1593 : nanokernel: Add callout API
- https://gerrit.zephyrproject.org/r/1381 : tests: Pend microkernel tasks on nanokernel objects
- https://gerrit.zephyrproject.org/r/1378 : kernel: Add thread parameter to _nano_wait_q_put()
- https://gerrit.zephyrproject.org/r/1377 : nanokernel: Add thread parameter to _NANO_TIMEOUT_ADD()
- https://gerrit.zephyrproject.org/r/1379 : microkernel: [un]block tasks on nanokernel objects infrastructure
- https://gerrit.zephyrproject.org/r/1380 : nanokernel: [un]block tasks on nanokernel objects infrastructure
- https://gerrit.zephyrproject.org/r/1550 : Bluetooth: L2CAP: Refactor l2cap_chan_del
- https://gerrit.zephyrproject.org/r/1553 : Bluetooth: L2CAP: Validate conn type in l2cap_chan_recv
- https://gerrit.zephyrproject.org/r/1552 : Bluetooth: L2CAP: Make common l2cap_disconn_req
- https://gerrit.zephyrproject.org/r/1606 : Bluetooth: L2CAP: Enable L2CAP public API for BREDR
- https://gerrit.zephyrproject.org/r/1554 : Bluetooth: L2CAP: Make common l2cap_disconn_rsp
- https://gerrit.zephyrproject.org/r/1555 : Bluetooth: L2CAP: Rename LE PSM server list variable
- https://gerrit.zephyrproject.org/r/1556 : Bluetooth: L2CAP: Add BREDR PSM server API interface
- https://gerrit.zephyrproject.org/r/1579 : Add capability to output binary data over console UART
- https://gerrit.zephyrproject.org/r/1580 : Add support of event logger put/get without sync
- https://gerrit.zephyrproject.org/r/1581 : Task monitor: move to "no_sync" API to feed kernel event logger
- https://gerrit.zephyrproject.org/r/1444 : Bluetooth: drivers/nble: Fix calling cmd from discov callback
- https://gerrit.zephyrproject.org/r/1594 : Bluetooth: SMP: Make use of sys_callout API
- https://gerrit.zephyrproject.org/r/1573 : sensor: rename SENSOR_TYPE_* to SENSOR_VALUE_TYPE_*
- https://gerrit.zephyrproject.org/r/1575 : sensor: split lsm9ds0_gyro driver
- https://gerrit.zephyrproject.org/r/1360 : sensor: fix init driver_api

MERGED within last 24 hours:
- https://gerrit.zephyrproject.org/r/1625 : Bluetooth: add drivers to include path
- https://gerrit.zephyrproject.org/r/1622 : soc: arm: add Makefiles one level up
- https://gerrit.zephyrproject.org/r/1621 : Bluetooth: Add recently added SPI & I2C HCI bus defines
- https://gerrit.zephyrproject.org/r/914 : gpio: Improve the public API to handle multi callbacks
- https://gerrit.zephyrproject.org/r/1271 : sensors: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1518 : build: fixes issue in windows Kconfig support
- https://gerrit.zephyrproject.org/r/1354 : cc2520: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1353 : samples: Using new GPIO API callbacks
- https://gerrit.zephyrproject.org/r/1598 : quark_d2000: remove unused code
- https://gerrit.zephyrproject.org/r/1500 : qmsi: uart: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1493 : qmsi: aio: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1098 : drivers: add qmsi files for Quark MCUs
- https://gerrit.zephyrproject.org/r/1495 : qmsi: aon_counters: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1488 : qmsi: i2c: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1494 : aio: rename sample name and make it generic
- https://gerrit.zephyrproject.org/r/1326 : power_mgmt: Sample usage of device_xxx__busy() APIs
- https://gerrit.zephyrproject.org/r/1325 : power_mgmt: APIs for devices to signal busy
- https://gerrit.zephyrproject.org/r/1491 : spi: use global init priority
- https://gerrit.zephyrproject.org/r/1497 : samples: power: use string for driver name
- https://gerrit.zephyrproject.org/r/1482 : qmsi: rtc: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1093 : doc: index config variable only once
- https://gerrit.zephyrproject.org/r/1521 : qmsi: use QMSI_LIBRARY instead of QMSI_DRIVERS
- https://gerrit.zephyrproject.org/r/1544 : qmsi: pinmux: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1492 : qmsi: spi: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1597 : quark_se: quark_d2000: remove all defines that now come from qmsi
- https://gerrit.zephyrproject.org/r/1498 : nble: Use string name for GPIO driver
- https://gerrit.zephyrproject.org/r/1609 : qmsi: spi: fixed warning due to const paramter in API call
- https://gerrit.zephyrproject.org/r/1490 : qmsi: pwm: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1483 : qmsi: watchdog: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1489 : pwm: unify driver names
- https://gerrit.zephyrproject.org/r/1506 : qmsi: flash: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1499 : qmsi: adc: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1496 : qmsi: gpio: use built-in qmsi driver
- https://gerrit.zephyrproject.org/r/1569 : i2c: add register access API
- https://gerrit.zephyrproject.org/r/1522 : doc: add architecture porting guide
- https://gerrit.zephyrproject.org/r/1608 : Bluetooth: tests: Add automated tests for new monitor code
- https://gerrit.zephyrproject.org/r/1618 : Bluetooth: Add name member to HCI driver struct
- https://gerrit.zephyrproject.org/r/1617 : Bluetooth: Move HCI device bus information to the driver
- https://gerrit.zephyrproject.org/r/1607 : Bluetooth: Add custom "monitor" protocol logging over UART
- https://gerrit.zephyrproject.org/r/1610 : Bluetooth: Remove RX priority fiber
- https://gerrit.zephyrproject.org/r/1620 : quark_se_devboard: Configure default UART for UART_PIPE