IPSP Zephyr sample


Maxim Uvarov
 

Hello,

Has somebody tested an IPSP sample recently? I'm trying to run it on a
Nuclea board (stm32wb55rg) and see issues with setting up an ipv6
(6lowpan) connection with the host. Stm32wb55rg MAC address is
discoverable with bluetoothcrl scan from the host. But no ip
connection and no bt0 creation on the host. Enabling debug and shell
says that bt interface is down on the Zephyr side, Zephyr waits until
it's up to set up the ip address.

I do not have any other board with BLE. It will be good to configrm is
example itself is not broken.

uart:~$ *** Booting Zephyr OS build v2.6.0-rc1-250-g5738114df26e ***
[00:00:00.223,000] <inf> bt_hci_core: Identity: 80:E1:26:1B:95:81 (public)
[00:00:00.224,000] <inf> bt_hci_core: HCI: version 5.0 (0x09) revision
0x0026, manufacturer 0x0030
[00:00:00.224,000] <inf> bt_hci_core: LMP: version 5.0 (0x09) subver 0x2126
[00:00:00.225,000] <inf> net_config: Initializing network
[00:00:00.225,000] <inf> net_config: Waiting interface 1 (0x200012b0)
to be up...
uart:~$ bt info
Not connected
uart:~$ bt scan on
Bluetooth active scan enabled
uart:~$ bt info
Not connected
uart:~$ bt init
Bluetooth init failed (err -120)
[00:01:33.228,000] <err> net_config: Timeout while waiting network interface
[00:01:33.228,000] <err> net_config: Network initialization failed (-115)
[00:01:33.228,000] <inf> ipsp: Run IPSP sample
[00:01:33.229,000] <wrn> net_if: iface 0x200012b0 is down
[00:01:33.229,000] <err> net_if: Cannot join all nodes address ff02::1 (-1)
[00:01:33.229,000] <wrn> net_if: iface 0x200012b0 is down
[00:01:33.229,000] <err> net_if: Cannot join solicit node address
ff02::1:ff00:1 (-1)
[00:01:33.230,000] <inf> ipsp: Starting to wait

Thank you,
Maxim.