Topics

Zephyr Project Application Development


Rachna Desai <desai.rachna70@...>
 

Hello all,
I am trying to use Zephyr application to boot it on Intel
galileo board gen2. In the steps provided on the Zephyr website, it is
mentioned that we have use 6-pin serial cable to connect board to laptop.
But can we use USB cable for the same purpose?
Looking forward to hear from you.
Thanking you.

Regards,
Rachna Naik


Flavio Santes <flavio.santes@...>
 

Hello Rechna,

The Galileo Gen2 Development Board is briefly described here:

http://www.intel.com/content/www/us/en/embedded/products/galileo/galileo
-g2-datasheet.html

The USB cable connected to the 6-pin header is a USB to TTL UART serial
converter.

Hope this helps you.
Flavio

On Fri, 2016-04-22 at 17:53 -0400, Rachna Desai wrote:
Hello all,
            I am trying to use Zephyr application to boot it on Intel
galileo board gen2. In the steps provided on the Zephyr website, it is
mentioned that we have use 6-pin serial cable to connect board to
laptop. But can we use USB cable for the same purpose?
Looking forward to hear from you.
Thanking you.

Regards,
Rachna Naik


Flavio Santes <flavio.santes@...>
 

Hello Rechna,

In order to get access to Galileo's TTL UART you must the converter
cable.

BTW, this is the Developers Mailing List for the Zephyr Project. 
Perhaps you can get more help here:

https://communities.intel.com/community/tech/galileo 


Cheers,
Flavio

On Sat, 2016-04-23 at 19:11 -0400, Rachna Desai wrote:
Hi Flavio,
             So according to what I understood from your answer, I
have to connect my laptop to board using 6-pin header USB cable and
not just our normal USB cable that is used to charge our cell phones?
Thank you.

Regards,
Rachna Naik


On Sat, Apr 23, 2016 at 5:17 PM, Santes, Flavio <flavio.santes(a)intel.c
om> wrote:
Hello Rechna,

The Galileo Gen2 Development Board is briefly described here:

http://www.intel.com/content/www/us/en/embedded/products/galileo/gal
ileo
-g2-datasheet.html

The USB cable connected to the 6-pin header is a USB to TTL UART
serial
converter.

Hope this helps you.
Flavio


On Fri, 2016-04-22 at 17:53 -0400, Rachna Desai wrote:
Hello all,
            I am trying to use Zephyr application to boot it on
Intel
galileo board gen2. In the steps provided on the Zephyr website,
it is
mentioned that we have use 6-pin serial cable to connect board to
laptop. But can we use USB cable for the same purpose?
Looking forward to hear from you.
Thanking you.

Regards,
Rachna Naik