Hello all, I am trying to use Zephyr application to boot it on Intel galileo board gen2. In the steps provided on the Zephyr website, it is mentioned that we have use 6-pin serial cable to connect boa

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/1630 : arc: make SRAM/DCCM values configurable - https://gerrit.zephyrproject.org/r/1629 : grove: use default i2c device set in Kconfig U

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 0 CLOSED JIRA items within last 24 hours: 0 RESOLVED JIRA items within last 24 hours: 0

Hi everyone, I'd like to propose we revisit the way that devices are configured in Zephyr. This is very RFC, please poke holes wherever you see fit. Currently, most drivers define one or more device i

Change-Id: I8af573484934a02893a395bb0d19551b5c9d0291 Signed-off-by: Vlad Dogaru <vlad.dogaru(a)intel.com> --- include/gpio.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff -

Hi, Thanks to Ben, we now have a porting guide for new architectures, please find it at: https://www.zephyrproject.org/doc/dev/porting/arch.html Thanks, Anas

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/1639 : doc: fix typo IMACU -> IAMCU - https://gerrit.zephyrproject.org/r/1638 : build: generate error if board is not found - https://ger

Hi All, I just uploaded net_buf fragmentation support to gerrit. https://gerrit.zephyrproject.org/r/#/c/1648/ The fragmentation support allows the network stack to use smaller buffer fragments to supp

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 0 CLOSED JIRA items within last 24 hours: 0 RESOLVED JIRA items within last 24 hours: 0

Hi there, I would like to boot the image of a zephyr application on the galileo board gen 2. For this purpose I am have followed the instructions to create the bootable image and copied it to the usb

Hi, I prefer building zephyr the linux kernel way, which is (what i am used too): $ make ARCH=arm CROSS_COMPILE=arm-none-eabi- ZEPHYR_BASE=~/workspace/zephyr menuconfig $ make ARCH=arm CROSS_COMPILE=a

From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> This adds a timer fiber which can be used track timeouts removing the need to use one delayed fiber per timeout. Change-Id: Id13347fbc69b1e83b

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/1683 : doc: Remove references to Bluetooth from Networking - https://gerrit.zephyrproject.org/r/1682 : gpio: Fix returning codes - https:

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 0 CLOSED JIRA items within last 24 hours: 0 RESOLVED JIRA items within last 24 hours: 0

Hi, Zephyr v1.3.0-rc1 has been tagged. The merge window for new features is now closed. The target date for the 1.3.0 release is end of this week. Below is the list of changes since v1.2.0 Regards Jav

Define some configuration structures and macros that can be used in device configuration. These usage scenarios are as follows: * device drivers will use DECLARE_* macros in their device configuration

Add some macros that drivers and applications can use in describing I2C clients. Change-Id: Ic7af97804e88ed3b9d4f68f9ac358a425f4cc17c Signed-off-by: Vlad Dogaru <vlad.dogaru(a)intel.com> --- include/i

NEW within last 24 hours: - https://gerrit.zephyrproject.org/r/1720 : sensor: add support for BMG160 gyroscope - https://gerrit.zephyrproject.org/r/1719 : nanokernel: Fix nanokernel object timeout rec

NEW JIRA items within last 24 hours: 0 UPDATED JIRA items within last 24 hours: 1 [ZEP-107] Need a consistent way for selecting boards and SOCs in menuconfig https://jira.zephyrproject.org/browse/ZEP-

Guys !! Good day !! Iam currently Evaluating the zephyr rtos for my project Appreciate your ideas on the below I have two radio's ( BLE and Wifi) on my board My application is to Switch ON radio and d