Re: [Zephyr-devel] HCI Interface UART//USB
Hi Vinayak,
I have followed all the steps as per white paper to flash nRF52840 and got stuck with step4 where i am unable to build the application . Facing issue with make command .
Kindly help on this issue to proceed further .
Please find the attached screen shot for reference.
Kavin Kumar
Mobile: 9994889187
Sent: Monday, July 30, 2018 12:51:54 PM
To: Chettimada, Vinayak Kariappa; Kavin Kumar Periyana Gounder Muthusamy (Product Engineering Service); users@...
Cc: devel@...; Smith, Miles Louis
Subject: RE: [Zephyr-devel] HCI Interface UART//USB
** This mail has been sent from an external source. Treat hyperlinks and attachments in this email with caution**
Hi Kavin,
There is a white paper which gives a short overview of the Zephyr project, describes in what cases you should consider using the Zephyr Bluetooth LE Controller instead of one of Nordic Semiconductor's SoftDevices, and explains how to build and program this Controller on nRF5 ICs.
It can be found here: http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.whitepapers%2Fdita%2Fwhitepapers%2Fnwp_029%2Fintro.html&cp=11_2
Or
http://infocenter.nordicsemi.com/pdf/nwp_029.pdf
If you are not receiving my emails, I am not sure how I can reach you.
Regards,
Vinayak
From: devel@... [mailto:devel@...]
On Behalf Of Chettimada, Vinayak Kariappa
Sent: Monday, July 30, 2018 9:13 AM
To: kavin.muthusamy@...; users@...
Cc: devel@...
Subject: Re: [Zephyr-devel] HCI Interface UART//USB
Did you receive? ... https://lists.zephyrproject.org/g/users/message/991
From:
devel@... [mailto:devel@...]
On Behalf Of kavin.muthusamy@...
Sent: Monday, July 30, 2018 6:17 AM
To: users@...
Cc: devel@...
Subject: Re: [Zephyr-devel] HCI Interface UART//USB
Kindly waiting for your update. Please Prioritize this issue.
Regards,
Kavin Kumar
Mobile: 9994889187
From: Kavin Kumar Periyana Gounder Muthusamy (Product Engineering Service)
Sent: Friday, July 27, 2018 9:13:26 AM
To: users@...
Cc: devel@...
Subject: HCI Interface UART//USB
Hello Team,
We have bought nRF52840 and nRF52 DK boards for BLE v5.0 testing with ellisys tester . Comport it is taking as ACM0 but HCI reset is failing in the IUT . As per the comment from nordic team HCI interface is not there in these boards. So how to install hex file from zephyrproject (samples/bluetooth/hci_uart sample for HCI over UART). I am unable to download this .Please help on this to proceed further .
Regards,
Kavin Kumar
Mobile: 9994889187
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
