The project file selection depends on whether you want to use USB CDC or UART for the communication, by default UART is used, applying ` overlay-usb-nrf-br.conf` will switch to USB (you’ll need to use the “nRF USB” port on your DK).
As for the Border Router itself, you can either setup a RPi, or use a Docker image provided by OpenThread community and run it on any Linux host.
From: users@... [mailto:users@...] On Behalf Of Nikos Karamolegkos via lists.zephyrproject.org
Sent: Wednesday, September 2, 2020 09:52
Subject: Re: [Zephyr-users] LWM2M client to nrf582540-DK #nrf52840 #networking
Thank you Robert, so the idea is to flash this https://docs.zephyrproject.org/latest/samples/net/openthread/ncp/README.html on my nrf52840-dk and then using the openthread border router implementation on a raspberry to build a OpenThread Border Router (OTBR)? If yes, do I need the overlay-usb-nrf-br.conf file or just the simple proj.conf?
On 8/17/20 5:58 PM, Lubos, Robert wrote:
R & D engineer at ICS-FORTH
Telecommunications and Networks Lab (TNL)